1 / 10
8mm Lead Screw Grease Applicator – Super Lube 21030 (85g/3oz PTFE Grease) — image 1
1 / 10

8mm Lead Screw Grease Applicator – Super Lube 21030 (85g/3oz PTFE Grease)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple Lead Screw Rods Grease Adaptor for the Superlube 21030 PTFE Tube (PTFE Grease) CAPS added !

Rating
5 / 5
Likes
468
Downloads
1,541
Makes
22
Views
6,554
Reviews
16

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

8mm Lead Screw Grease Applicator for Super Lube 21030

A practical grease applicator for lubricating 8mm lead screws directly from a Super Lube 21030 tube (85g / 3oz PTFE grease).

The adapter screws onto the grease tube and allows you to apply grease directly to the lead screw. A longer version provides extra reach for the rear lead screw on Bambu Lab printers.

Easy to print — no supports required!

Compatibility

  • Grease tube: Super Lube 21030, 85g / 3oz.

  • Lead screws: 8mm outside diameter.

  • Check your printer’s maintenance instructions to confirm which components require grease and which lubricant to use.

Available versions

  • V2.0 — Standard: the original grease applicator.

  • V2.1 — Extended: the same applicator with 20mm of extra length to reach the rear lead screw on Bambu Lab printers.

  • Two caps are also included in the model files.

Printing instructions

  • Supports: not required.

  • Orientation: print with the threaded tube connection facing down and the grease outlet facing up.

How to use

  1. Clean the lead screw to remove old grease and dirt.

  2. Screw the adapter onto your Super Lube 21030 tube.

  3. Position the applicator against the lead screw.

  4. Gently squeeze the tube to apply grease, following your printer manufacturer’s maintenance instructions.

For cleaning before lubrication, you can use the Rod Sloth:
https://www.printables.com/model/605305-rod-sloth-fits-most-3d-printers

Related accessory

My Super Lube 21030 Accessory Cap is available here:
https://www.printables.com/model/845730-superlube-21030-accessory-cap

Update history

  • 7 May 2024: added V2.1, with 20mm of extra length to reach the rear lead screw on Bambu Lab printers.

  • 14 April 2024: added two caps.

If you find this model useful, please leave a like and share a photo of your print in the Makes section. Your feedback and compatibility reports are welcome!

Tags