57 models
Maturity: Very good 6 prototypes. In use since 2022/01. If you loose the cap of an oil bottle, you can replace it with this screwed cap. The dispenser material is most of the time made of low surface tension material. Then it is hard to…
Adapter for CX-80 for LM10LUU bearings in Prusa Mini/MK3.9/MK4 Printed in PET-G, Layer Height 0.2mm Remix of CX-80 lubricant adapter for LMU08
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
Mr. Lube is a tool for lubricating 8mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). I’ve included a cap that seals the tool and has a male thread in the end to store the standard…
This improved MK4 version has some new features you asked for - we found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it…
The applicator end is unmodified. Threaded end is enlarged and modified to have a 9/16-16 UN thread to fit an 85g Super Lube tube. Note: the thread dimensions were found by trial and error, so might not be exactly right, but seem to fit…
A Cap for the "Prusa lubricant LM8UU adaptor" Designed by Honza David. This is ONLY the Cap, for the adaptor check out David Honza´s Design. It is a loose fit . If you want it to be tight scale in down in the slicer. “With some trial and…
Lubing my chain is always a bit of a pain as I try to get a steady stream of lube on the chain with one hand and rotate the crank arms with the other. Invariably, somewhere along the line the tip of the bottle slides off the chain causing…
Object description: Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. The longer version for LM10LUU-bearings is available in two versions. Version 1 - with small…
The original adaptor for lm8uu including instructions can be found here . UPDATE - cover for adaptor added (fully compatible with original LM10UU version) - cleaning stick added for leftover lubricant to be removed
I needed to lubricate some LM6UU bearings so I remixed the original LM8UU adaptor so I could use the lubricant I got from Prusa when I bought my printer.
This is a remix based on the two models https://www.thingiverse.com/thing:3440524 (base for the thread) https://www.prusaprinters.org/de/prints/32359-prusa-lubricant-lm8uu-adaptor-bearing-pacifier (adaptor) For a detailed instruction for…
I got tired of having no place to store the lubricant tube that comes with the spray can so I created my own little design. It's effective and quick to print. I've made it a bit undersized so it should be able to be used on various…
Object description: Tool for lubricating LM8UU bearings. Since many people ask for a screw cap in combination with the bearing pacifier from David Honza, here it is. Handling Instruction from David Honza (nothing to add from my side):…
I always lose the cannulas that come with the cans of spary lube which are usually attached only with a bit of tape! Where did the cannula go? In the mess of the laboratory it is not always easy to recover it! And so I wondered if it…
LM8UU lubricant adaptor (Bearing pacifier) based on the model from Ri3del that incorporate a cap over the injector when in storage. My remix is to implement an injector that locks into each bearing similar to the Prusa supplied bearing…
3x1 Gridfinity bin (6u height) to store up to 12 packets of Bambu thermal grease or lead screw lubricant. Designed to be fully stack-able. 6x2 magnet holes in bottom.
i only tested the fit in my syringe but didnt test the real application. I can't rule out that it won't work (could be too much pressure on the threads while pushing).
Bearings maintenance “After ~200 hours of printing, the smooth rods should be cleaned with a paper towel. You can buy a lubricant (any good super lube will do) and apply it onto the smooth rods (XYZ axes).” I try to follow good advice and…
This is a hybrid of Lubricant LM8UU adaptor for Super Synco Lube DE21030 with screw cap and Linear Bearing Greasing Cap for 12g Super Lube Tube . I wanted to screw on the popular 20130 (85gr) adapter/cap on to a 21014 (12gr) tube, because…
I needed a lubricant dispenser for a projet, so I modified the well known lubricant dispenser for bearing in a "needle".
Adapter for CX-80 lithium grease tube for lubricating LMU08 bearings. Not tested yet. No supports needed. Layer high: 0,15 Fits for M15x1,5 thread
A fast and clean way to apply LITHIUM grease to lead screws
Organizes the 3 In One PTFE (or similar bottled alternative) Lubricant into you existing Gridfinity setup only taking 1x1 bit of space. You might think that the exposed sides would allow the bottle to slip out the sides easily but it…
A very simple holder to be used with the HSW system, designed for a bottle of lubricant based on the Halfords own brand.
This is a “spillproof” container intended to hold cutting fluid, lubricant, or anything else that's applied with a brush. To use, fill with a liquid of your choice up to the fill line inside and screw on the lid. No more than a little…
This tool simplifies the process of spreading lubricant when it is time to lubricate the smooth rods. No need to apply lubricant directly on the smooth rods. It is best to apply the lubricant on the tool first using a toothpick or…
I wanted a simple print-in-place one-piece toothpaste tube clip to stop the toothpaste from squeezing back down into the tube at the end. The F3D file includes a user parameter to make the clip longer or shorter. Whatever value you enter…
This is a 1x1 Gridfinity bin for the Prusa lubrication set, with holes for both sizes of the adapter tool and spaces for lubricant tubes. This is based on the lubricant applicators that came with my MK4 kit, for the LM10LUU and LM8UU…
Tool for lubricating Print settings: Material: PLA. Resolution: 0,1mm Infill: 10% Perimeters: 2 Brim: no Support: no
Now nearly all my Xtool equipment has found its place in the workshop. But only nearly there is this small tube of famous “PENG SHENG” still left over. So, let’s create a holder for this as well. No, I have all the items which came with…
A fully parametric tub with a screw on lid for use with cutting fluids, lubricants, etc. There's an opening for the brush to go into and to have a place to put it while working. I've included the Fusion 360 CAD file so you can change it…
This adapter allows you to use any 3d printing nozzle you want, just print it thread it (and yes you do have to thread it your self), and boom you can go from a .1 tip to a 1.0 tip in seconds. just be carful while threading, the parts do…
I printed this using Elegoo PLA+, but most anything should work. I contemplated TPU and may test with that later, but the PLA was already loaded in my printer and worked just fine. The model is not perfectly fit to the bottle, but from my…
For the Cooler Master competition. Some supports required, should hold up a full bottle and a full tissue box. Can be replaced with WD-40 if needed.
Keeping a 3D printer properly lubricated is important for its longevity and for print quality. While only a few types of lubricants are typically needed, they are not packaged consistently or often in a manner convenient to store. This…
For quick tabletop access to you lubricants and oils. Holds small spray bottle, slid-o-mix trombone lubricant's, Bach tuning slide grease and Al Cass Valve Oil.
Mr. Lube V2 is a tool for lubricating 10mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). NOTE: This for large 10mm screws!! Not the 8MM "Z" axis screws found on most 3d Printers…
French cleat holder for lubricant for printer designed for: Hazett mini lubricant press lubricant Dust blower
Syringe holder for tube with lubricant
This model is a half-seal for a suction gun. The piston assembly comprises two backing washers and two of of these half-seals positioned back-to-back. Suction guns go bad quickly, and the seals are not replaceable. They're effectively $30…
a simple 2X1 gridfinity bin to hold the Bambu lab lubricant and lubricant packets that come with the Bambu lab A series
A useful 1U tray for finger or wire lubrication, Just pour warm petroleum jelly and wait to cool
Mounts to the left side of the spindle using M5x20mm Socket Head Cap Screw.
The Prusa lubrication set comes with a syringe for injecting the lubricant in the coreXY system. This cover allows you to keep the syringe with lubricant safe for future use. https://www.prusa3d.com/fr/produit/lubrication-set/
Use this to add a 1/2 inch tube extension to your Klein wire and cable pulling lubricant . I used this tubing: Eastman 3/8 Inch ID (1/2 Inch OD) PVC Clear Vinyl Tubing, 20 Foot Length, 98566 . Assembly Directions: Cut desired length of…
A quick jig to slide over pinewood derby axles to prevent spraying the car with lubricant.
My take on an adapter for use with a tube of SuperLube 21030. The other side is for the LM8UU lubricant applicator that is included with Prusa-branded lubricant. The recommended alternatives to Prusa-branded (Mogul LV 2 EP) lubricant,…
This is a model that bolts onto the side of your K1 series printer and holds a 4oz. bottle of 3-IN-ONE PTFE lubricant. There is a left and right model included for your convenience. Print upright for the best results. This model requires…
This custom-designed tool holder features precision-fitted slots engineered explicitly for the Bambu Lab Lubricant Oil and Thermal Grease tubes. The model was created from scratch to serve as a practical add-on module for the existing…
This fits the SnakeBite yoyo bearing lubricant when the silicone ring is removed. You will need to print this in PETG as PLA was too brittle and snapped when trying to install it. You will also need one of these hook locks (linked below)…
IKEA SKÅDIS holder for a 32 mm 3D-printer lubricant bottle. The cup has a 33 mm internal diameter, 35 mm height, a rounded insertion rim and a centered 2 mm pressure-relief hole. A separate replaceable hook slides into the external rear…
Use this to add a 1/2 inch tube extension to your Klein wire and cable pulling lubricant . I used this tubing: Eastman 3/8 Inch ID (1/2 Inch OD) PVC Clear Vinyl Tubing, 20 Foot Length, 98566 . Assembly Directions: Cut desired length of…
A quick jig to slide over pinewood derby axles to prevent spraying the car with lubricant.
Mr. Lube V2 is a tool for lubricating 10mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). NOTE: This for large 10mm screws!! Not the 8MM "Z" axis screws found on most 3d Printers…
This fits the SnakeBite yoyo bearing lubricant when the silicone ring is removed. You will need to print this in PETG as PLA was too brittle and snapped when trying to install it. You will also need one of these hook locks (linked below)…
