1 / 2
Lubricant LM10UU and LM10LUU adaptor for Super Synco Lube DE21030 with screw cap — image 1
1 / 2

Lubricant LM10UU and LM10LUU adaptor for Super Synco Lube DE21030 with screw cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Lubricant LM10UU and LM10LUU adaptor for 85g Super Synco Lube DE21030 tube with cap.

Rating
5 / 5
Likes
42
Downloads
307
Makes
7
Views
1,108
Reviews
7

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Object description:

Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap.

The longer version for LM10LUU-bearings is available in two versions.

  • Version 1 - with small bore holes
  • Version 2 - with slots instead of bore holes

 

The same tool for LM8UU bearings: https://www.printables.com/de/model/93726-lubricant-lm8uu-adaptor-for-super-synco-lube-de210

 

Are you looking for the same tool with screw cap for the original prusa grease tube? Look here: https://www.prusaprinters.org/de/prints/120081-prusa-lubricant-lm8uu-adaptor-with-screw-cap

 

Handling recommendation:

Screw the printed tool on the Lubricant tube, carefully put the bearing on and turn it counterclockwise until you feel a slight resistance. Then press the tube and watch the tip of the tool for grease leak. Once the grease starts leaking, the bearing is lubricated sufficiently. 

 

Used print settings:

Material: PLA, PETG, ASA/ABS.

Resolution: 0,1mm

Infill: 25%

Perimeters: 2

Brim: recommended

Support: no

Tags