Counting matching models…
The injector design from @uepsie, which I received when I ordered the Zaribo 320, is pretty good. Just the thread wasn't perfect for the tube from Super Lube. So I reworked it. Now it fits real good! :) I hope you gonna like it. Please…
After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…
A 19-inch, 2-piece, modular rackmount for up to 3 of the Unifi U-POE-at adapters . comes in either a 3 slot or a 2 slot version for either side. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix…
This is a simple venturi injector for injecting air into a fluid stream. Instructions The part is designed to assemble with the following PVC parts: one 1/2-inch slip (F) to 3/4-threaded (M) one 1/2-inch slip (F) to 3/4-threaded (F) Once…
LMU8 grease injector M15 Remixed for liqui moly 3510 100g grase LM47 with MoS2 Printed from PETG
Model of an original wall-mounting bracket, that comes with the PoE-injector for a UniFi AP AC Lite. Might be compatible with other UniFi PoE-injectors. Print Settings Printer: Anycubic i3 Mega Rafts: No Supports: Yes Resolution: 0.28 mm…
Little helper to inject grease into Misumi LM8UU and LMU8 bearings. The injector is designed to fit Nigrin 74145 multipurpose grease, which is one of the recommended lubricants for mentioned linear bearings. The thread size is M24 x 3 I…
Superlube 21030 works great for 3D printer bearings. I want to put some into my Sainsmart 3018 pro desktop router, but the bearings are 10mm inner diameter, 30 mm length (and 58 mm length). I remixed the LMU8 bearing injector to fit a…
These turn any plastic baggy into a piping bag in 2 seconds. ~ Full Piping Tip sets ~~ Regular size: https://www.printables.com/model/290093-piping-bag-tips XL Size: https://www.printables.com/model/292317-piping-bag-tips-xl-size
This is a remix of the Starlink Dishy DC Power Supply PoE Injector enclosure posted by Everlanders at https://www.thingiverse.com/thing:5893999 The video showing Everlanders design and printing can be seen here:…
A 10-inch rack mount for up to 3 of the Unifi U-POE-at adapters . It can be a good option if you don't have a PoE+ switch for your devices. To install the adapters, simply slide them in from the front of the mount. I have also included a…
Rámeček pro UNIFI POE injektor. Vhodný pro 24V i 48V verzi. Rámeček je velmi těsný, ale injektor se dá stále vysunout.
Simple tool which slips over the injector, and then you shove the straw from your injector cleaning solution on the other. This is designed to fit over a standard Bosch EV1 or EV6 type injector with ~14mm nominal O-ring size. Use a hose…
Made for UPOE-AT, but may fit others. Print settings: 0.2mm layer height 3 walls Bridge settings = on
1U rack mount for for the Unifi PoE++ 10G injector. The 19-inch version comes in two halves, which allows 1-6 injectors per rack unit. The 10-inch version is a singular piece, which allows for 1-3 injectors per rack unit. There are also…
This is a model for Ikea Skadis to mount a Ubiquiti PoE injector. You need 2x M4 Nut and 2x M4x8 Screw. The original model is from ari.mandjelikian Customisable Stabilised Ikea Skadis Hook multiple sizes…
This is a helper tool to insert SIM cards into Model 3/Y computer more easily. Meant to be printed on SLA printer, as it has delicate features. Use wide side to help insert SIM card, and narrow side to push it till the latch clicks. Don't…
This tool is designed to assist in installing the Teflon seal on a fuel injector for a Ford EcoBoost engine. Before using this tool, depending on your printer, you may need to sand the guide part smooth. Simple instructions for this model…
In creating CATIAV5FTW's jet engine I found myself needing longer fuel injectors.
This is a tool used for calibrate injector teflon gasket rings into installation caliber size. Similar to original tool 2 448 401 Print settings: 0,1mm layer After printing all surfaces which will be in contact with ring must be treated…
A practical wall-mount holder for Mounjaro (tirzepatide) injector pens / KwikPens. Attaches to the inside wall of your refrigerator to keep pens organized, easy to access, and out of the way — helping maximize fridge space. Features:…
I've been looking for a travel sharps container for prefilled injector pens for a while now but the only ones that would take a full sized pen are 0.5l bins and far to big for air travel. The model consists of two parts and screws…
This model is designed to fit in a standard 19" rack and hold UniFi U-POE-AF PoE injectors. I've included a blanking plate and variants to hold 1, 2 or 3 injectors. The design is symmetrical, so you can mix and match blanks or injectors.…
This is a battery powered, rechargeable, Raspberry pi based RCM payload for the Nintendo Switch. The enclosure is made so that it can be battery powered and recharged with a built in USB micro b port. The payload can be injected into the…
This model of venturi injector can be printed with suports. This design is concepted for 1 inch hose. A Venturi injector (Venturi Injector) works on the basis of the Venturi effect, creating a pressure difference in a pipe to suck in a…
Box for EpiPen Autoinjector and Pills
As explained in the publication by Selvaraj, Kulkarni, and Pearce; see enclosed. Uploading here to preserve availability — the link given in the publication seems dead. I was able to find the model files on uwo.ca.
I bought solar irrigation setup for my balcony and used their "hook" irrigation thingies and was quite frustrated when I needed to add more needles. And decided to model 6 needle ring that will irrigate ground all around plant and deliver…
A mounting plate for UniFi power over ethernet injectors for Leviton structured media panels . Will accept up two PoE injectors. Works with either the older or newer model that come with the access points. Uses the Leviton push-lock pins…
Experts recommend carrying two epipens. However, the new generic epipens (the Amneal authorized generic of the Adrenaclick epinephrine autoinjector) do not come with a clip to hold both epipens together, unlike name-brand epipens. To…
Educational model of of pintle style rocket motor injector. The model is simplified to use only one liquid input which you can fit to common ¾" piping such as garden hose or insted of a shower head (well injectors are kinda shower heads,…
Single design for dummy AA battery and for AA-shaped power adapter that allows connecting external power supply to AA battery-powered devices. Requires some extra parts: 1x DIN 7985 M3 screw (for positive terminal); 1x DIN 965 M5 screw…
venturi injector pump for fertilizing my garden. I have not tested flow rates. I designed it with supports because the model kept snapping off when using cura's supports, the model was too skinny. Print Settings Printer Brand: Creality…
Description: Keep your Ski-Doo pDrive primary clutch running smoothly with this custom 3D printed grease injector tool. This design allows you to easily lubricate the roller needle bearings using the manufacturer-specified Isoflex NB-52…
Simple rackmount adapter for the ZTE PoE Adapter that comes with some 5G network kits (ZTE-POE-A4803A-Z-PD).
I needed to mount my Unifi 48V PoE injector to the wall, but didn't have the stock one that comes with it. Checked online and could only find wall mounts for the 24V PoE injector, so I modeled this one. I modeled it to encase the PoE…
A remix for pushing lubricant through mountingholes of linear rails or other use-cases.
This remix had two main purposes- to make the rack to look more like the other units I printed, and to make the tolerances work a little better as printed on a Prusa Mk3.9. To the aesthetic changes- biggest difference is that corners are…
Found this useful way to hang injector pens in the fridge, remixed it to hold a 4-pack of Mounjaro pens. There are two versions - the hanger, which works if your pens flare at the top like Mounjaro does and saves print material, or the…
I designed this after I started on Zepbound. I travel extensively for work, and at times have a pretty rough job so this gives me peace of mind that nothing will damage my injector. I've printed it in Prusament PETG-CF and PC-Blend…
Boite de rangement pour gicleurs
A remix of Ri3del's excellent grease injector with an extended base to fit over the longer nozzle of Lucas White Lithium Grease tubes. Usage is exactly as shown in Zaribo's instructional video for the Superlube grease.
Filament : Devil Design. Vanilla PETG 0.10mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : First layer. 85c. Other layer. 70c. Support : None.
Surfaces must be perfectly smooth. One mandrel for ring expansion, the second mandrel for ring compression. Filament material: COPET Resolution: 0.2mm
I'll call this a remix even though I only used sjones16's design as inspiration and rebuilt the whole thing from scratch. In comparison - I changed the dimensions over-all to be slightly more .4 nozzle friendly, corrected the off-set…
Fuel injector stand for storing injectors between cleanings. Mocked off a Honda Fit top feed fuel injector, should work for other top fed injectors. Files for 2, 4, 6, and 8 injectors **version 2 just has the spots numbered Print Settings…
This is a companion to my Downspout gutter diverter for rain barrel , which allows you to send the overflow of the rain barrel back into the gutter for easier management. There is currently one size available, but message me if you'd like…
I want to minimize cableclutter as much as possible for my 10"-rack (by MandicReally). This 90W PoE+++ injector from Ubiquiti (UACC-PoE+++-10G) is a big honker so I decided to design a 2U mount instead of having it laying in a messy tray.…
You'll need to print the original cap as well as this.
Use the bed to heat and shape the button, then glue it in
19" rackmount holder for TP-Link PoE injectors like the TL-POE150S with outer dimensions of 54 by 24mm. GCODE File is sliced for the MINI+ with Prusament PLA and 0.1mm layer height.
This is my first model. I printed this model with 0.2mm layer height, top/bottom pattern lines, infill pattern lines, 70°C bed temperature, 240°C extruder temperature, max fan speed of 50%, and part cooling fan off. I used PETG which will…
Adapter for the lubricate tube, you recive with your prusa for LM10UU insted of the LM8UU
modéle d'injecteur pour voiture realiser sous fusion 360 une trentaine de CM . l'assemblage se fait a l'aide de l'aiguille centrale et coller l'ensemble .
Polystyrene Injector for Wall Insulation Without Access. If you need to insulate your walls but have no access or cannot cut openings to insert polystyrene panels or rock wool, this custom tip allows you to inject polystyrene beads…
Grease injector for standard LM8UU and the longer LM8LUU linear bearings with M15 thread. Fits on LiquiMoly LM47 tubes for example.
I wanted to mount the Unifi AC Mesh directly to the power socket with the POE injector. 2 x M4 screws are used to connect the AC Mesh mounting adapter. The power socket adapter can be bought from Aliexpress:…
Either my Autool CT-150 didn't come with the bungs needed to use normal injectors in it, or they just don't come with them! I designed these to fit a standard EV6 style injector snugly against the o-ring and have a large enough opening…
This is a grease injector for LM8UU/LMU8 linear bearings. It fits the Nigrin 74145 multipurpose grease with a M24x3 thread on its tube. This is the grease I use for my bearings which is easy to get and quite cheap in Germany. Support is…
This is based on my wallet version of the holder but removes the spots for cards. Included are two versions, one where the Auvi-Q devices are stacked and one where they are side-by-side (my preference for pocketing). The Auvi-Q devices…
I made this adapetr soi that my POE “AF” injectors would fir in the slots for 30W AT injectors on the rack models provided by @mauker (see Unifi PoE+ Injector (U-POE-at 30W) 19-inch modular rack mount ). Just slot the adapter into the…
I use it during vacation for my plants to be alive. petg 100% infill you need: 5v pump from aliexpress hose 4*6mm for aquarium oxigenation 3 way hose splitter 5v usb charger or other adapter arduino timer or smart socket (i used alex…
a simple 1u rack mount for the U-PoE+ from ubiquiti.
Simple main jet injector holder for 8 main jet infector for BVF 16N1 carburettor for Simson moped. I use it for setting up my engine so I wanted to have some different main jet injectors with me. All 8 slots have M5 threading.
Remix of Maurício Pessoa’s 6” 2U blank -- now with honeycomb cutouts & PoE injector mounts for my mini‑rack setup!
A simple tool to allow cleaning inside a BMW M57 fuel injector pocket with your shop vac. Fits 1.25in standard vacuum hose. At the correct scale this print should be 254mm tall, double check before printing. I made this for use on my…
About the design This coaster is designed after the Saturn V F1 rocket engines nozzle injector plate. I'm assuming you're reading this because you're as nerdy as me and already know what this is, but for those who don't: the injector…
Injector connector plug. Connector plug to connect to an injector. Don't know how many injectors will be compatible - quick print to test. Was made for an ev14 injector. Printed in abs/sbs Print with support 20% infill. 22 minute print.…
A simple wall mount for TP-Link POE injectors. I created the model for the TL-POE150S which is the one I have, but it should work with other injectors too as they are similar. You will need to print it twice, one for each side. The…
this is a nice case for an inexpensive stainless meat injector that can be found at your favorite online retailer. I suspect it will work with many similar models. The main body of the injector should be around 32mm in diameter, the 2…
I created a model of a bearing lubricant. (LM10UU). It is now possible to lubricate bearings on MK3 / MK3s + without dismantling the bearings themselves. -Variation1 is intended for a tube supplied with a printer from Prusa research…
This is a wallet designed to hold some cards and 2 Auvi-Q autoinjectors (similar device to an Epi-Pen). Included are two versions, one where the Auvi-Q devices are stacked and one where they are side-by-side (my preference for pocketing).…
Mount for 48V Unifi PoE injector for Ikea Skadis utilizing T-Clips (flush)
Printed with FLEX filament
This is an alternative version to the Water Spike ( https://www.printables.com/model/1233306 ). Instead of dripping water onto the ground, it injects the water into the ground underneath your plants to give them a maximum amount of water…
A simple and effective wall-mount holder for Wegovy (semaglutide) injector pens. Designed to stick to the inside wall of your refrigerator, keeping your pens organized, visible, and easy to grab while saving drawer or shelf space.…
I haven't seen anyone make her injector yet, so I did! If you're clueless, it's from the Steven Universe movie. It's pretty simple to print, but it does require supports recommended to print the sliced version for the easiest print but I…
This is a tray to hold your autoinjector pens. I designed this specifically for Mounjaro/Zepbound but it may work with other pens if they use the same mechanism - YMMV. If the fit is too snug, may need to print at 101% or shave the sides…
A 10-inch rack mount bracket for the Unifi PoE+++ 90w injector (UACC-PoE+++-10G) and the Flex Mini 2.5G (USW-Flex-2.5G-5) Be sure to print this in a more heat resistant material, the injector gets hot enough to warp PLA! I printed mine in…
A 10-inch rack mount bracket for the Unifi PoE+ 30w injector and the Flex Mini 2.5G (USW-Flex-2.5G-5). This will ONLY fit the 30w injector, I designed it with the 1G version, but the 2.5G version should also fit. Different wattages has…
This remixed model fits to the wallplate of the Unifi PoE+ 2.5G injector (UACC-PoE+-2.5G). Like the original it needs 2 M4 nuts and M4x8 screws.
Stand to hold UniFi In-wall AP (U7-IW / U6-IW / AC-IW-PRO) TPlink TP-POE150S (PoE Injector) GoCoax MA2500D (2.5Gb Ethernet over Coax)
Edimax POE Injector GP-101IT tray for 1U Raspberry Pi Rack. Tight injector fit in tray. Printed from PETG, no supports. Fusion and step files are available. ps. Other Edimax injectors seem to use the same enclosure, so there is a chance…
A DIN rail mount (35mm) adaptor for the TP-Link TL-POE150S Gigabit PoE Injector . I printed in PLA without infill (perimeters and top / bottom walls set to 2mm). If you find my designs useful, you might consider buying me a coffee . But…
I lost my wall mounting bracket for one of my Flex 2.5G switches so I decided to replicate the OEM bracket. I have dubbed this as the UACC-Switch-WM (Wall Mount) since the Ubiquiti web store does not have an official part number but does…
My first print in PLA broke not during use but from the tip swinging into the floor while attached to the gun and breaking. I reprinted in PCblend for strength.
Added space to attach a PoE Injector
This grease injector for LM8UU bearings is adjusted to fit a small tube of SKF LGMT 2/0.035 (35g/1,2oz) bearing grease. The outer thread diameter on the tube is 10.56mm which does not correspond to any standard thread size. I have created…
I designed these to adapt the Bosch injectors to fit on a Honda civic fuel rail, I recommend printing them with Petg or ASA, that seemed to work best.
Credit goes to Cliffyk, found this model here https://terrylove.com/forums/index.php?threads/clack-ws1-injector-cap-sock
Just tie down the injector with velco or cable ties.
This model is for adapting the Novartis made Extavia (interferon beta-1b) syringes to fit the Bayer Betaseron (interferon beta-1b) auto injectors. The adapted syringe will fit both the Bayer Betaject lite, as well as what prompted this…
Print Upside down, no supports, 5+ perimeters. PLA, PETG, ASA, Whatever. I've purposely made this bottom heavy to make it resistant to tipping. Either-way, it should be very difficult to have razor pop out. Using extra perimeters makes it…
Designed for POE Injectors included with Tenda Products, Mounts on side of a rack. Inspired by the way the GPS Modules for Ericsson Baseband Units are mounted on racks (IYKYK) 2 holes on each side for flexible mounting orientations, you…
Title + please print in high temp materials such as PC (original is pressed nylon PA)
I couldn't find an allen wrench big enough in my tool set, so I just printed a hexagonal prism long enough to get a socket on it. Worked well for me with an 11mm socket. Let me know how this works for you. I printed it laying on it's side…
It's a longer version of the original to lubricate LMU8L / LM8UUL which are 45mm long. Until now i couldn't print it myself. Hopefully I can test it in the near future.
Makes the injector clip to a DIN rail
This is the injector model from Halo ODST and Reach, can serve as one or both if you please. Modeled previously and never assembled but here is what I had previously
