Lubricant LM10UU and LM10LUU adaptor for Super Synco Lube DE21030 with screw cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lubricant LM10UU and LM10LUU adaptor for 85g Super Synco Lube DE21030 tube with cap.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 307
- Wydruki
- 7
- Wyświetlenia
- 1108
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Object description:
Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap.
The longer version for LM10LUU-bearings is available in two versions.
- Version 1 - with small bore holes
- Version 2 - with slots instead of bore holes
The same tool for LM8UU bearings: https://www.printables.com/de/model/93726-lubricant-lm8uu-adaptor-for-super-synco-lube-de210
Are you looking for the same tool with screw cap for the original prusa grease tube? Look here: https://www.prusaprinters.org/de/prints/120081-prusa-lubricant-lm8uu-adaptor-with-screw-cap
Handling recommendation:
Screw the printed tool on the Lubricant tube, carefully put the bearing on and turn it counterclockwise until you feel a slight resistance. Then press the tube and watch the tip of the tool for grease leak. Once the grease starts leaking, the bearing is lubricated sufficiently.
Used print settings:
Material: PLA, PETG, ASA/ABS.
Resolution: 0,1mm
Infill: 25%
Perimeters: 2
Brim: recommended
Support: no