Prusa lubricant LM8UU adaptor with screw cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for lubricating LM8UU bearings with an original Prusa grease tube and a screw cap.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 273
- Makes
- 16
- Views
- 1,397
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Object description:
Tool for lubricating LM8UU bearings.
Since many people ask for a screw cap in combination with the bearing pacifier from David Honza, here it is.
Handling Instruction from David Honza (nothing to add from my side):
Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it counterclockwise until you feel a slight resistance. Then press the tube and watch the tip of the tool for grease leak. Once the grease starts leaking, the bearing is lubricated sufficiently.
Print settings:
Material: PLA.
Resolution: 0,1mm
Infill: 25%
Perimeters: 2
Brim: no
Support: no