1 / 2
Prusa lubricant LM8UU adaptor with screw cap — zdjęcie 1
1 / 2

Prusa lubricant LM8UU adaptor with screw cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool for lubricating LM8UU bearings with an original Prusa grease tube and a screw cap.

Ocena
5 / 5
Polubienia
33
Pobrania
273
Wydruki
16
Wyświetlenia
1397
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Object description:

Tool for lubricating LM8UU bearings.

Since many people ask for a screw cap in combination with the bearing pacifier from David Honza, here it is.

 

Handling Instruction from David Honza (nothing to add from my side):

Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it counterclockwise until you feel a slight resistance. Then press the tube and watch the tip of the tool for grease leak. Once the grease starts leaking, the bearing is lubricated sufficiently. 

 

Print settings:

Material: PLA.

Resolution: 0,1mm

Infill: 25%

Perimeters: 2

Brim: no

Support: no 

Tagi