Counting matching models…
A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model. The right and left side are slightly different heights as the plastic molding thickness…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
This model includes two replacement parts for the RC Monster Truck from Monster Jam Gear and axis which connects to the wheel The main gear which connects to the motor The positions of both gears are shown in the picture with an arrow.…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
I wanted to create a cool X-axis visualizer for the Prusa Mini. I designed this based on a similar concept that I saw for the MK3S. This visualizer requires (1) 8x3mm magnet and super glue to attach the magnet to the X-Axis. The two…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
I saw the other satellite dish and looked at the stl file but didn't like it so I made a new one. my first proper 3d object using tinkercad. It uses a 6mm x 3mm magnet to attach to the z axis stepper, print with supports on. Seti here we…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
This is a small visualization for the axis cross of FreeCAD - you can use it to understand directions in FreeCAD. Per convention the FreeCAD axes are displayed in RGB: X axis - red Y axis - green Z axis - blue I would recommend printing…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
English XYZ axis + ABC rotation The rotation rings ABC are mobile. Check that the rings can rotate easily before gluing the axes in position. Do not hesitate to adjust the bushings before assembly. CHECK THE DIRECTION OF THE BUSHES BEFORE…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
It is made of two different parts, 6 parts in total. I used a drop of hot glue where the axes meet. The cones are easily press fit. No need for material changing printer. .3MF has settings for Bambu X1C. 2024-09-20: Added bigger variant…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Loads of visualisers around. I wanted one to remind me what filament that I had loaded in case I needed to adjust the Extruder Idler (flex), or other printer settings. Of course we still need to remember to change the visualizer when we…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Remix of existing model by TC . Arrows extruded from main body in order to support layer colour change in PrusaSlicer for non-mmu colour changes. G-code files have supports and colour change enabled. Matching Z-Axis model is here →…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Remix of existing model by TC . Arrows extruded from main body in order to support layer colour change in PrusaSlicer for non-mmu colour changes. G-code files have supports, colour change enabled and 2 objects. Matching X-Axis model is…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
With this mod, you can place Creality's Nebula camera on your Ender 3 V3 KE without the need for screws or similar parts. Inverse Version: Simply rotate the camera 180º on its own stand to invert the image, no need to make any adjustments…
The vice can be adjusted in two different angles and there are several attachments that you can easily change, if you don't like the attachments I have made you can make one yourself, with the drawing with the dimensions as a PDF in the…
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
Slice using your own settings. You should use the same settings that you would normally use when going for dimensionally accurate parts. Take 6 measurements and let the calculator do the rest. Use this calculator: link No need to request…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Про то как пользоваться этим приспособлением я рассказываю в этом видео: https://boosty.to/internal_engineer/posts/2f7f2e46-ffed-48f4-83ae-be5985ef6b76 Если у вас закусывает верхнюю втулку оси X, эта 3D модель + наждачная бумага поможет…
Bracket mount, for the Y axis, to calibrate the input shaping on your Sonic Pad with the provided ADXL345 accelerometer on an Ender3 S1 or S1 Pro. Install it in the front of the bed where the handle typically goes. That way no clip or…
End cap for on top of the Z-Axis of the Bambu Lab P1P and X1(C). Printed in ABS on textured PEI plate in high resolution. The caps are slightly smaller then the hole of the z-axis so they can easily be removed or move/rotate. ABS is used…
Kingroon KP3S - Z axis Linear Rails: This is a upgrade for kingroon Z axis, with this upgrade you have a best result on Z axis and you can increase the Z-height of your printer to 225mm. In the attached documents you will find a pdf with…
This is the remeshed Prusa Bear style y-axis bearing holder for Prusa MK3s/+. This would allowed you to replace the Misumi Linear Bearing LMU8 without buying the new bearing clips. The only thing you have to change is the existing U-Bolts…
ENG: My printer came with only three of these clips, but I wanted a few more of them for thighter spacing at the ribbon cable. made with tinkercad. GER: Der Drucker wurde mit drei dieser Clips geliefert. Ich wollte ein paar mehr haben um…
Mr. Lube is a tool for lubricating 8mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). I’ve included a cap that seals the tool and has a male thread in the end to store the standard…
Edit 17.1.2023: Added optimized model with longer base and some extrusions to fit into the frame so it is more stable and easier to use. This is simple alignment tool that you preferably need when upgrading to dual Z axis to…
It's my take of linear rail kit I've designed for my Anycubic Vyper. The kit includes the left and right MGN12H mounts that replace the V-roller bearings and original Y-axis endstop mount for 2020 extrusion. [UPDATE] Through some changes…
An X axis mount for the ADXL345 inspired by @FLYNINDUSTRIES's bed clamp mount . This mount was designed for the Neptune 4 Pro but may work on other models leveraging the metal guide rails. Please note that someone has explicitly tried…
DIY linear slider for X axis on Ender 3 pro, v2, CR-10 (Replaces whole mounting plate) Y axis here This fits precisely in the V grooves of the 20x20 extrusion that is on Ender 3 Pro - it may work on other printers as well but I can't…
Codemonkey1973's Ender 3 Camera Mount for Raspberry Pi Camera V2.1 was very well designed but I wanted to cleanly route the cable to the back and saw room for improvement. So I rebuilt it with the following improvements: Threaded holes…
MOD TESTING VIDEO: WARNING! Only tested with KP3S PRO S1 that has Y-axis linear rails and not v-wheels. This modification requires removing the power supply to attach extension screws to the side of the printer. But to remove the power…
I designed this alignment tool for my Anycubic Kobra 3. this tool will help to adjust the excentric bearings of z you need to print two an place them on the x axis and manualy move the z axis all the way down, adjust the excentrics and…
M3 Hex Nuts 1x M3 T-Nuts x6 M3 Screw 8mm x8 M3 Screw 40mm x2 M5 Screw 20mm x1 M5 Bolt x1 M8 steel rod 220mm x2 2GT 20 Teeth 5mm Bore Aluminum Timing Pulley x1 2GT 20 Teeth 8mm Bore Aluminum Timing Pulley x2 100mm Length 6mm Width 2GT Belt…
This is a simple remix of a remix - because I love heatset inserts. Credit to Anatoly Kharkov for the ingenious dual purpose clip/mount design: Fits both the X and Y axes for the Ender-3 V3 SE The clip is a nice secure fit on the bed Easy…
A complete collection/model of Cable Chains and Mounts for all Prusa MINI/MINI+ Axis. I noticed that it was quite hard to find and install Cable Chains for all Axis of the Prusa MINI/MINI+, so here is my collection/model of mounts and…
It is so easy to find this shaft broken in the joystick pad of the mercedes E class and C class. You can print this one and save yourself $200.
Base and Rooster are designed to fit without glue, just insert the rooster into the base and you are good to go. Glue the magnet to the base and place it on Z Axis motor on your mini :). Enjoy and share your print.
Designed for 20mm x 20mm box section tube often used for the x-axis gantry beam on corexy printers. Some tubes have relatively wide dimensional tolerances due, for example titanium tube might be 20mm +/- 0.3 mm - so anywhere from 19.7 to…
This is a tank shaped z-axis motor visualizer for Prusa Mini+ with an articulate turret. My Prusa Mini looked like a tank after the base upgrade, so I thought it would be cool to add a battle tank visualizer. This base design is from…
As you know Prusa Mini finally got Input shaping (ALPHA). It works fine on some of the printers but others get an X Homing error. I Tried couple of things but adding C Clip to the x axis worked. Tightening the X axis belt also worked, but…
Does the x-gantry belt angle bother anyone else? Constantly variable belt tension. CVBT. Fixed. Theoretically, with a 3mm belt vertical offset, printing on the left of the bed vs middle only makes 0.0023% difference in the movement per…
The Problem: I wanted to reduce the noise coming from my steppers during prints at night but wanted to try to print in TPE instead of buying the dampers. The hardware required for the x-axis spacer is hard to find and needs to be 3mm…
I really loved Cocian's beautifully simple extruder visualizer but I wanted something for the Z axis extruder on the Prusa Mini. Requires one 6x3mm magnet. I would recommend 4 perimeters and 100% infill, it's a very quick print! Please…
This is the actual Fusion360 file. it has: 1. The AXIS aluminum mast modelled (my own) 2. The Flipsky 65111 motor modelled (my own) 3. The folding propeller (propeller from another design, the propeller holder my own model)
The solution consists of an ESP32-Cam flashed with Tasmota. A good description of how this works can be found here: https://cgomesu.com/blog/Esp32cam-tasmota-webcam-server/ To upload the MJPEG images from the camera to Prusa Connect, I…
The Ender 2 Pro spool holder, z-axis anti-wobble, and lightbar can be printed with the Ender 2 Pro. It barely fits but it fits. I will post a pic of the orientation up above in the picture section. I printed mine at 50% infill with PLA+…
The end stop from the Metal-Kit for the Y-Axis does not fit for Omron-Switches and those from the printable parts does not fit for both, so I created this one. I turned the switch from horizontal to vertical to get triggered properly by…
100mm levelling blocks for levelling your x axis compatable with many 3D printers 0.2 LH
The design makes use of the 4 x 9mm pins for alignment. The pin holes are modeled with a very tight fit (0.05mm clearance), adjust as necessary. The center hole needs to be precision threaded M14x1.00. Any deviation off centre will render…
I don't like this black plastic cube end switch mount, so I designed a new one. Suitable for all Creality V2.0 End limit switches! You can use the original screws for the limit switch. The position of the limit switch is identical to the…
This is a fix for the frame mount of Squirrelbrain's V-Minion Y-axis drag chain mod (3-hole version) where the frame mount interferes with the 3030 corner bracket and forces the drag chain into a smaller bend radius. You can find more…
it is basically 50x50 rectangle with walls on each corner to make it easier to measure Faster and easier to print from many other models Also it is easier to measure with calippers This model helps you only with X & Y axis in the design A…
Interlocking axles to hold the ball bearing finger spinner with two fingers. Since most of them have a hexagon socket or round hole in the middle, but I prefer to play with them in my hand, a solution had to be found so that you don't…
I had some difficulties with the z-axle of my Ender 2 Pro, it partly lost steps because it had too little power. I have now installed a Nema 17 40mm instead of the original Nema17 34mm. The original mounting is unfortunately only suitable…
TwoTrees SP-5 SP-3 (Sapphire Pro, Sapphire Plus) MGN12 X axis centering protractor for easier centering of rail on X axis while mounting of it. Made for tight fit (if you printer prints with right dimensions of course :) )
4 piece hotend / fan setup for Creality style printers that have the PrinterMods MDD plate, and x-axis linear rail. Uses Assortment of M3 hardware, and needs several m3 nuts. Uses Prusa Mk3 fan ducts. Please leave a comment if you find an…
UPDATE 1/23/2023 NEW BELT RETAINER and FANG Mount The original belt retainer broke after a long time in service but I decided to re-engineer it anyway. I forgot to measure to length, but I cut a piece off a roll that was about 6 inches…
In case you don't want to mess with sensorless homing you can clip this part onto the upper smooth rod and mount a Makerbot endstop to it. Works alright on my printer.
Simple noise remover while leaving z axis a little play. Printed with PETG, only a noise reducing ring printed in Flex to cancel noise (after printing, on one side cut it as you can see in the photo). Simple put part L and R on smooth…
Axis Square support It can be used for single-arm printers such as Kingroon KP3s or dual Z axis printers such as Anycubic Chiron, Ender3... (In this case you need to print the symmetry of the attached piece) With the help of this support…
This is an X-axis belt shim for ELEGOO Neptune 2 series 3D printers. It makes the X belt parallel to the X axis (gantry) and equalizes the nozzle travel scale over the all position on the axis. Therefore, the accuracy of the printing is…
As the BMG extruder moves your nozzle you'll need something to compensate! Well this is it! Designed especially to be used with the Nemesis Dual Fan unit & BMG extruder, this companion range extender will give you a full 290mm of usable X…
I want to create a full modular System for a Camera-Mount on the X-Axis. This System is specially for all enclosed Ender-3 Systems like mine. I want to get a good angle for my Camera and it has to be extended to sit in front of the…
Hello, i converted my Anet A8 to a AM8 ( https://www.thingiverse.com/thing:2263216 ) But i did not like the Endstops from the beginning. so i switched to Makerbot Design Endstops. With thumbscrews to adjust the Bed there was no way to…
I got often problems with a bent X-Axis while transporting my ender 3 on the backseat of my car. Often I had to realign it afer the transport. So I developed this transportation-lock and alignment tool. To align your x-axis of the…
This is meant to make the Y axis rails of the X-Carve stiffer by providing a tie between the rail and the table the machine is attached to. There are two sets of pieces, 4 brackets which tie into the side waste board mounting holes and…
I found a lot of 6-Axis Coordinate Cubes to print but i wanted one to also show Axis U,V and W. Took me some time (new to Fusion360) but here it is. You need to print all Parts once except for the Tip, that needs to print 3 times. Printed…
I missed watching a plane flying circles around my MK3 extruder motor. Since on MK4 there is no way to install it to the extruder, I have decided to create a series of X-axis visualisers. This one is a rocket orbiting in circles. You can…
I built this unique calibration model for you to find the offset of your printer fast with high accuracy . Here are some steps that you are suggested to take to properly measure: print the model out without putting any offset to holes and…
Video of engraving pi to 100 decimal places wrapped around a Bamboo Pen: https://youtu.be/ObtNYFsVEy4 Short video of this engraving a Bamboo pen, https://youtu.be/ybpt1YFTOgo Longer video engraving a Compass Rose on a Bamboo pen,…
This is experimental design allow using the Moose scanner with the Multi-Axis-Turntable. The position have been optimized for having excellent distance needed for the Moose scanner. The best position is the hole in the middle. For smaller…
Remix of my x carriage R7 with M3 heat set inserts to install e3D REVO v6(TriagleLab CHC TD6) with straight cable routing. MK3S+-x-carriage_R7_M3-heat-set-inserts_REVO_CHC - carriage MK3S+-x-carriage-back-REVO-CHC - back part of the…
This is the belt-driven z-axis assembly of my CorEssentials project. This is just an abstract of the whole project for people who just want to use a belt driven z-axis in there project. In my built I used a 16T pulley on the Motor for…
K40 Lasercutter X axis carriage rollers designed as a direct replacement for the original nylon rollers with a tight press fit onto the bearings and a holding lip taken over from the originals. Print instructions Category: Parts Summary…
Bed mount for the "BLV MGN CUBE - SFU1204 Z axis by Cpt_Obvious" for two Z Ball Screws. Using the Stock Rail and the stock aluminum frame. As compared to the original mount this is only one piece. Mount it: Mount the Upper BK10 Bracked…
just recently got a mini lathe an mini mill an wanted to add a dro but at the same time do it as cheaply as possible while still being accurate an these are 2 ive gotten an used, a 6 and 2 8 but i will be replacing the x axis with a 12…
6-Axis Robot from MedConcept UG (haftungsbeschränkt)
I draw a functional Model of the X-Axis Carriage of my Flashforge Creaotr Pro 2 after i couldnt find one on the internet. Please note that I tried to get as close to the original dimensions as possible, but I can't guarantee it. The model…
You print the shaft and head of the arrows individualy and connect it with the triaxle. The triaxle should be printed lying ont the triangular side. This enables it to print without supports and have a uniform strength in all arrow…
I had a spare X axis and attempted to reverse engineer it to maybe use in another printer. It's not 100% complete or perfect, but should be an ok reference for someone.
Sono Motors (tm) hat mit #mySion ein STL-Modell ihres Solarautos bereit gestellt. Da ich beim FDM-Druck einige Probleme mit dem Supportmaterial hatte (schwierig zu entfernen) und gerne bewegliche Räder hätte, habe ich mir das Remix-Modell…
This bracket is better than the one that came with my Ender-2. The original one had the holes for the end stop switch too far in, resulting in x axis going too far to the left. The nozzle would be able to travel outside the bed, which is…
Drawbot (XY Plotter) X-Axis Carriage & Pen Lift Mechanism (Linear Actuator) more info here soon I used the servo gear and "rack" gear elements from artichoke's "Linear actuator for mini servo (11-20gr)" design found here…
A very oversized (and strong) Z axis mount
designed for 3D Scanning Marker by @firstgizmo A variant of the "ThreadToThread" part designed to be screwed directly into the threaded holes of the Revopoint Dual-Axis Turntable (which correspond to the M6 standard). Several heights are…
Quick remix to use magnets I already had. 6.1mm x 1.5mm specifically. Also removed the overhangs for ease of printing. I've included a STEP file if people want to alter it for their own magnets. Category: Parts
UDPDATE ADD VER Engine Bracket AXIS V2.1 Engine Bracket AXIS V1 Model The X bracket differs from the original one. It does not hang in the air. The length of the guides has been increased ----What do you need----- 1.Insert nut M3*4*4.5…
Hey Guys, this is probably one of the best upgrades you can do to your S1 pro this aligns the probe with the nozzle on stock hot ends, this is needed for couple of reasons but the most obvious is if you suspect you have a bent Y extrusion…
Add a little directivity to the Y-axis cable of KP3S. It also serves as a guide for spring steel bed surfaces. Two M3 heat insert nuts are required, but there is a hole for mounting the ADXL345. Please print with heat resistant filament…
NOTE: this was only tested using the following Neptune 3 Pro / Neptune 4 Y Axis Linear Rail Kit ( AliExpress ), so YMMV This mod may also work for Neptune 4, but I do not own one to test with With toolheads such as Stealthburner, one…
Remix to fit MakerBot style end stops to the EVA carriage X-Axis. Fits the EVA parts included in the V-Minion drawings. You will need to use a different X motor cage for this to work. see my other models for the motor cage.
Crossed Roller Guided Manual Motion Platform by JLCMC JLCMC automation parts Industrial Automation and Manufacturing-Focused Online Supply Chain at JLCMC jlcmc.com offers different types of automation spare parts for any specifications…
https://www.amazon.com/dp/B09M73XRBH?psc=1&ref=ppx_yo2ov_dt_b_product_details UniTak3D Rail X-axis Conversion Belt Fix with added LED Bar I got one of these kits because I installed a BLV rail kit a year ago and the rails were crap. So…
Crossed Roller Guided Manual Motion Platform by JLCMC JLCMC automation parts Industrial Automation and Manufacturing-Focused Online Supply Chain at JLCMC jlcmc.com offers different types of automation spare parts for any specifications…
Crossed Roller Guided Manual Motion Platform by JLCMC JLCMC automation parts Industrial Automation and Manufacturing-Focused Online Supply Chain at JLCMC jlcmc.com offers different types of automation spare parts for any specifications…
I am sharing the robotic arm that I built as a school project. Disclaimer: Please note that I will not be publishing detailed assembly instructions, complete parts lists, or detailed documentation for this specific build. Goal: The…
Version 2: Added a version 2 because i felt like it wasn't secure enough on the extrusion. I added a spot for an M5 screw and t-nut on the top to attach to the 4040 extrusion. Remixed the original Wider Duender motor mounts for 4040 y…
Inspired by 2.4's flying gantry, making gantry partially flying, using bed mesh as indication, manually tune Y axis into one plane. I use standard voron heatset, modify if needed. Loosen one rear end of Y axis, use a long M3 bolt to…
Crossed Roller Guided Manual Motion Platform by JLCMC JLCMC automation parts Industrial Automation and Manufacturing-Focused Online Supply Chain at JLCMC jlcmc.com offers different types of automation spare parts for any specifications…
