Gyroscope for x-axis
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.38 – €0.47 net (excluding VAT)
For file: x-axis-gyroscope_0.2mm_PETG_MINI_30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.42 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 30 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix of the Extruder Gyroscope
- Rating
- 4.857 / 5
- Likes
- 73
- Downloads
- 332
- Makes
- 10
- Views
- 2,120
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the Extruder Gyroscope Print in place with press fit magnets
This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets
It is made for the Purse Mini+ but should be compatible with the MK3 / MK4
If not, let me know and i will try to make the necessary adjustments
Print instructions
- It is a tight fit, make sure your printer is well calibrated
- Try printing the Gyro connector first to see how it fits
- You may try different connectors
- Try printing the Gyro connector first to see how it fits
- The parts are already oriented in the good position
- The color changes already set in the .3mf file
- Print the parts in PETG or PLA
- Nozzle diameter: 0.4 mm
- Layer height: 0.2 mm
- Perimeters: 2~3
- No supports
