Lead Screw Cleaner For 8x2 z-Axis Screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy clip on design. Works with Prusa and Bambu
- Rating
- 5 / 5
- Likes
- 248
- Downloads
- 1,846
- Makes
- 41
- Views
- 7,291
- Reviews
- 29
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip it to the lead screw. Move the z-axis up and down. Be careful not to crush the cleaner between the top or bottom.
I've included the Fusion file which has a “snugness” parameter called SNUG. This parameter adjusts the tightness of the fit and is set to .2mm in the .stl. It adjusts the distance between the inner faces of the clip portion. If the clip is too tight, reduce the snugness parameter to .1 or to 0.
I printed it in PLA, .2mm layer height, no supports and no brim.
**Update** Per request for those without Fusion 360, I've added three new .stls with preconfigured snugness settings. Snugness refers to the distance between the inner faces so that it clips snugly onto the screw 8mm. Snug 0 = 8mm, Snug .2 = 7.8mm and Snug .4 = 7.6mm.