Counting matching models…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
The X1C's feet didn't sit securely on top of my Alex cabinet as it was slightly too narrow (about 6mm). This mount solves this problem by extending the width of the cabinet so that the feet are firmly supported, making it harder to…
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
The top of the AMS and the printer door printed in clear filament, the printer itself printed in silver and the other AMS parts and spools printed in black. Assembly is simple, just print the parts, glue the top of the AMS down and put…
Default Bambu Studio Settings, No Support Either Version Works Great
This X1C Drag Chain design stands out as the best option for cable management due to several key differentiators, which were identified through a careful evaluation of existing drag chain designs, including the Bambu Labs original and…
The stand lets you install the heater to either blow upward or blow downward in your machine. Deflector only sits on top of the heater as its facing upward blowing heat towards the top glass. Nothing fancy. The tolerances were perfected…
Contact me if you plan to use magnets that are not 10mm x 2.3mm and I will alter the model to fit your needs. This will interfere with the stock filament spool holder on the rear of the printer, so an alternative spool location is…
Updated: Added shorter poop bin for X1C with out the riser. Trim the poop slide to give it more range of motion. Remove poop slide adjustable support. Trim the right main unit to add more room for poop slide. THIS ONLY WORKS IF YOUR AMS…
This package includes a side organizer that clips under your glass lid of your printer, a hotend cleaner, a X, Y and Z axes cleaner, a AMS and wire disconect tool and a filiment guage.
1-6 numbered eject Buttons for the vertical mounted Prusa Mk3/4, Bambu X1C, P1, A1 Build Plate holder from Frantisek23 Printing recommendation: PETG, PLA might also work 3 perimeters 20 % infill, Gyroid no supports
do not print the mk1 rotator.
I just got the Biqu Panda Breath chamber heater and needed a way to route the power cable out the back. Biqu provide a printable riser, but it is much too tall for my liking. I wanted a minimal riser, just tall enough to fit a cable, and…
A magnetic connection for exhaust fumes. Uses 6x 6mm D x 3mm H magnets and connects to 3in D tubing.
I like customizing my printers and so my P1S needed some changes as well. I designed and printed a few new handles for the AMS and printer.
If you want to put other objects than your fingers on the keyboard (in my example a different keyboard) you put this on top that will allow you to do exactly that! As a bonus i included a hole for your finger so you can still use the…
Corner holder for BambuLab printers, so they don't move during printing and sit still in place :) 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
My original T300 extruder broke twice so I wanted to make something that allows for easier maintenance. Currently still in a working prototype status this was printed in PLA+ at a 45° angle to increase strength of the print. I used 3mm…
Simple filrst layer for Bambu Lab A1 V2 P1P P1S P2S X1 X1C X1E and easy access with pull tab, choose the printer sheet.
Slip this decorative handle onto your P1S, X1C, or X1E door as a fun way to perk up your printer! Benchmark your printer with this classic boat, and then as an added bonus, slip it onto your door as an ornamental handle. I designed this…
This adapter does not need the difficult to install heat set inserts. It also removes material that can be used for cable clearance so I did away with the redundant mounting holes and added cable clearance and a pathway to snake the…
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
Extends the spool holder out to allow for the AMS to stay plugged in while you use it. I use this in conjunction with thrutheframe's improved spool holder: https://www.printables.com/model/278580-bambu-lab-spool-roller Print Instructions:…
This Printable includes the main mount and switch mount to mount the 3DChameleon Mk3 onto the BambuLabs series of printers. The large Base Mount holds both the 3DChameleon and the Electronics Enclosure on the back of the printer. There…
The X1C Mount Rotatable Spool Holder allows you to use a “ 608ZZ Bearing Rotatable For Filament Spool Holder ” on your Bambu Lab X1C. The non-rotatable Spool Holder is standard on most Creality Printers. Using the mount a Spool Holder…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
PLEASE DO NOT DOWNLOAD/PRINT THIS VERSION ANYMORE! There's an updated Self-aligning Lead Screw Shield version now available! This new version solves the binding issue and blocked camera views. RELEASE HISTORY 2023-11-17 : Version 2 - now…
WIP ---------------------------------------------------- Anyone who downloaded prior to Jan 5th 2024 and have problems with the top glass fitment, please see the Adapter parts added. ----------------------------------------------------…
Remixed the model to accommodate 3 6x2 magnets (to be glued in place) to ‘stick’ the pooper to the X1c Removed the top and bottom layer in bottom of the bin to show the infill. Infill has been made small enough to still catch and hold all…
This contain many settings for PETG There was no support in this print
Just added 2mm height, my LDO Heatbed has 2mm more in height than voron spec. (Original von Iconic Fab)
AMS Riser using less filament，supports LED strips, spool holder, glass top and XTouch
Bambulab upgrade - Poop chute D. 120mm x H.184mm x W.166mm Hole for magnet W.8.5mm x H.6.5mm x D.3mm .gcode file are for X1 cabon with AMS multicolor
2026-02-12 : Check the size of your OG Cam, if it's 52.2x52.2 like @Negarpls_3674399 mentioned in the comment section, this version might not support your camera. I released the .STEP file, though, if you make the change, share a remix,…
For use with the configuration where the AMS sits on top of the printer. The light attaches to the handle on the printer's glass lid. Quick and easy to remove. Printing: Printed in Bambu PETG Basic (Grey) on the smooth PEI plate with…
This holder provides better access to the Bowden tube on the back of the machine than when using the factory spool holder on the back. I added a filament guide post to provide a more consistent path for the filament between the spool and…
Oversized Lego stud door/top glass knob/handle for Bambu Lab P1S/X1 printers. Thanks to cmaddy there is a 6 times oversized 1x1 Lego stud that inspired me to make this remix. Now the famous Lego stud can, and will be used as a door/top…
Just a quick adapter from 120 to 100. Specifically fits the taper of https://www.printables.com/model/711795-p1s-x1c-ventilation-system I probably could have just remodeled a whole end but the adapter was easier. This converts a roughly…
First little disclaimer. This part is not polished, additional revisions are likely. Please provide feedback. =) The idea behind the ribbon version is a lighter part (less than 14g) and potentially less harmonic distortion transferring to…
Disclaimer: Regarding the MMSS , I must say that in this one (UMSS) practically all the modules have been rebuilt, with special attention given to detail and functionality. They have been thoroughly tested, which involved several…
0914/24 - Added Bambu PLA Basic Black. Prints well just need some retraction fine tuning. Will fix and upload a new file for it. Slicer Profiles for Bambu Lab X1C In this page I'll upload .3mf files for all the PLA filaments I use, once…
I present a set for lifting the upper window for Bambu Lab X1C, which includes: 1. Limiter 1 - 1 pc. 2. Limiter 2 - 1 pc. 3. Base 4 - 1 pc. 3. Holder 3 - 1 pc. 4. Arm 2 - 1 pc. 5. Pin - 2 pcs. In addition to the above-mentioned elements,…
Big update: New, Simple Version of The FNT Plates storage for Prusa MK3/4/Core One has been released. You can find it here. Hi, A have many build plates for both Prusa and Bambu printers and very limited space for storage. So I decided to…
Just like the title says - this is an adapter to attach a 3" ventilation hose to the back of the X1C (it may also work with the enclosed version of the P1, not sure as I don't have a way to test it). I printed mine in PETG with a .4mm…
This covered purge chute prevents any spillage and prevents pets from getting to the filament scraps when no one is looking. The bucket and lid can be removed to dump the scraps. The covered guide screws to the X1C with the provided screws.
I loved the idea of Whitys' steel sheet holder with the pushbutton eject mechanism, and then I saw Chewey's remix with the seesaw pusher that seems like it may be a little more robust. Unfortunately, the original and the remix both only…
The Hotend and Fan Case for Gridfinity is a specialized 3D-printed component designed to neatly store and organize your Bambulab X1(C) 3D printer's hotend and fan assemblies. Compatible with the Gridfinity modular storage system, it…
An alternative exhaust filter cover with place to mount A1 mini brush (I've used a replacement from Aliexpress ). Add this GCODE after wiping the nozzle on the default brush, but before it goes to ‘exposed steel surface’: ;===== wipe…
I found the "Poop" (purge) chutes shared online overly complicated and bulky. My printer sits on furniture with very limited depth so I designed this chute to fit in the space left between a common 90 degree PSU cable and the wall . That…
ENTILATION HOSE PRINTER ATTACHMENT 3" A screw on & magnetic hose attachment for the back of X and P series printers. Screw on the backplate to the printer and add a 3" ventilation hose to the adapter. When you need ventilation you…
I tried looking for a spool holder that allows you to hold 2 spools while retaining the original holder, but couldn't find any, so I designed my own. I'm aware that there's an issue with the holder sagging down, so I might make a little…
Remix of @NilsR_331850 "Magnetic Filament waste trash can for Bambu Lab P1P/P1S/X1C/X1E" to use 3/8" x 1/8" magnets.
I had an extra round temp/hygrometer and wanted to monitor the temp of my chamber when printing things such as ASA or PAHT etc. This mount slides into one of the holes in the back of the chamber and is easily removable. It is just…
Cover for the chamber fan of P1S/X1C. Made to help keep cool air from entering enclosure when printing things where a higher chamber temp is needed like ABS/ASA/PA etc. Uses 4 8mm x 3mm magnets. The two little nubs center the cover via…
Is it a brilliant design, NO. Was it engineered well, NO. Does it hold a multitude of accessories, NO. Is it beautiful, ABSOLUTELY NOT (but I do like that metal blue PLA). Does it do everything I need, YES. I knocked this together in…
Didn't like a gaping hole in the back of the printer and a basket that was always shifting around and purged filament ending up on my desk anyway. So I made this one, that close exit hole and is held tight to the back of the printer with…
ich war es leid das die Poops sehr oft beim Reinigen auf der Druckplatte landeten, deshalb meine Version in Anlehnung (The Wiper 3.2 von Maleko). https://makerworld.com/de/models/437463?from=search#profileId-342665 Mit Poop Fänger :-)…
This pretty straightforward model helps you hold your build plates while you don't use them. Very slim, can hold up to 4 plates. There is a tongue that holds the model to the table, using the weight of the printer. It's pretty tightly…
After i made a bentobox i was unhappy how low seems to be the airflow and carbon cartridge volume, so never used that and i decided to design a new air-filter for my x1c maximizing as much as possible volume of carbon cartridge and the…
This is an elevator for the upper part of your bambulab printer. This piece provides you with different functionalities, advantages and will solve or avoid many problems: The PTFE will enter the extruder more vertically, without curves,…
I found this poop chute from V3 Precision a while ago and really liked it, but didn't print it, because it wasn't exactly what I was looking for. I couldn't find something that I liked more, so I decided to adjust this one in order to…
I really liked the Spool holder by Mi Sch and wanted a version that fit right on my printer. So, I kept the spool holder arm and designed a basic part which fit over the lip of my Bambu X1C and fit around the inner protrusion, for added…
The original is excellent for winding good spools to new spools. One of my problems is two part spools that came apart or came loose. This redesign "locks" winder pieces together for for finicky feeder spools.
Bambu Lab X1 Carbon screen frame inspired by Star Trek: The Next Generation LCARS user interface. I searched Memory Alpha for the components of the replicator which you'll fine displayed on the frame. Printed with .2 nozzle for greater…
The X1C's feet didn't sit securely on top of my Alex cabinet as it was slightly too narrow (about 6mm). This mount solves this problem by extending the width of the cabinet so that the feet are firmly supported, making it harder to…
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
Designed this little guide bracket to prevent TPU filament from jumping off the rear mounted auxiliary feed spool, particularly with a full spool. When it jumps it can wind around the spool support and disrupt the print, this little guide…
Adapter for Bambu X1C printer screen that allows tilting it down by additional 45 degrees in case printer is up on shelf. Adapter has locking mechanism for both display and printer frame. Display has no collision when door is opened.…
Enjoy this 3-piece, Detroit Lions Bambu X1C door handle! I designed this with the intention of printing face down on the build plate to produce grain-like texture once glued together. All 3 pieces can fit on one build sheet if printing…
Similar to other wedges used to lift the glass on P1S/X1C for ventilation, but I fancied trying my own design. Original model by : U2336931904
Printer: Bambu X1C Surface: Engineering Plate (other surfaces might work) Hotend: 0.4 mm E3D High Flow ObXidian (the Bambu hotends should work) Filament: Fiberlogy PP Natural Use at your own risk. I offer no guarantees or support. Tips…
This is a 1 x 1 gridfinity bin that has slots to hold 3 bambu lab X1c wipers and 5 cutters. It has internal magnets inside. Printing Instructions Print in low infill (5-15%) and high layer height (0.2-0.32mm). Internal magnets To get the…
Fits perfectly, large enough for all needed tools.
Some say “Why?”, I say why not! - Bambu Labs X1C Printer Ornament, perfect for the Christmas spirit and season! Hope you like! Want a Commercial License to sell my prints? Join my Patreon or Thangs as a paid member 😊…
I recently bought a P1S printer and realized I needed a way to catch the fillament that's cut when this printer primes/calibrates and finishes prints. I found a model online that had the basic shape I was looking for. I've added two extra…
I frequently switch Hot Ends on my Bambu Labs X1C between 0.2 and 0.4, and I found it frustrating dealing with the Front Housing constantly getting in the way. This simple tool keeps the Front Housing securely out of your way while you're…
This insert is a work of art! I wanted to print it without rotating, so made a quick remix. EDIT: Second file “Inlay Remix Fix” has the main card holder walls thickened by 1 mm to make them more resilient; I had two makes break there…
Many thanks to Frantisek23 for the beautiful buildplate-holder ! In order to be able to print the number buttons in two colors , the numbers are required. Unfortunately, these are not included in the print files. That's why I'm supplying…
Build plate holder hangs on the side of the X1C or P1 models. Holds 6 build plates in a staggered fashion so you can easily see whats available. Does not require a top riser and will fit alongside top glass plate.
Thanks to the creator of this model in the link below. I printed this first to allow the top glass to slide open and the mounted the LED strips. https://makerworld.com/en/models/798702#profileId-738283 After printing and installing this,…
Description: Extend the original spool holder with this easy snap on spool holder. Its a bit longer, so that wider spools fit on it. And it is mounted with ball bearings, so the spool can roll free with less resistance. You only need two…
The top of the AMS and the printer door printed in clear filament, the printer itself printed in silver and the other AMS parts and spools printed in black. Assembly is simple, just print the parts, glue the top of the AMS down and put…
This purge chute bin catches the Bambu X1C or P1S “poops” and is designed to fit placement of printers with minimal (near-zero) side clearance. It also features a sight gauge on the side to quickly see how full the bin is. Printing: 0.4mm…
I was remix https://makerworld.com/en/models/599997#profileId-522100 this fan duct with little bit better for printing and add some extras. No need supports for printing, all come off easy. Also optimise connecting pegs prints separately,…
I wanted to raise my printer up a bit and there are a few models that offer that but they are long prints. This is my own design and far simpler than the ones I found. Feel free to remix and modify all you want!
Optimize your Bambu Lab X1/X1C/P1S/P1P printer with this magnetic filament purge chute, designed specifically for printers on raised surfaces. Its closed design retains heat in the chamber, while the magnetic attachment system makes…
Description P1S/P1P and X1C elevated feet. about 6.5 cm high! Just print. Carefully remove the original rubbers. And press it into the raised feet. And then ready to be placed underneath. And now you also have more space under the…
To improve the almost perfect design from nagybirek, I redesigned the spool holder wheels (required 4x per spool holder). I had some problems to fit filament spools of different manufacturers into the spool holder. I made following…
This 10x10mm (1cmX1cm) L-bracket, 4mm hole , can be printed without supports ,designed to be oriented on its side to improve strength dude to layer orientation . The design features: A reinforced structure to enhance durability. A small…
![[NEW MODEL IN PROGRESS] aca hurricane for bambu lab p1s,a1,p2s,x1carbon,p1x.](https://media.printables.com/media/prints/55883b49-4d4a-468d-a4a6-6d6f6183a293/images/11966674_69c73a7e-5c14-4dd2-9835-69644495fba5_4653c231-e623-4181-b439-b9ea06d951a2/chatgpt-image-dec-21-2025-08_54_53-pm.png)
