Magnetic Vent Hose Attachment X1C/P1S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attachment to screw on the back of the printer with a magnetic 3" ventilation hose adapter.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ENTILATION HOSE PRINTER ATTACHMENT 3"
A screw on & magnetic hose attachment for the back of X and P series printers.
Screw on the backplate to the printer and add a 3" ventilation hose to the adapter. When you need ventilation you magnetically attach the adapter with the hose to the backplate on the printer and either run the hose out a window or to a filter. I run mine to an air purifier with a hepa filter when I print ABS/ASA as I do not have a window near the printer.
Remix of RandomKhaos model with the following changes:
- 10x2.5mm magnets (only need 8 instead of 16) - Let me know if you need different size magnets
- Slimmer profile
- Counterbore and countersunk screw holes
- Lip added to hose adapter (hose clamp not needed)
10x2.5MM MAGNETS
This design uses 10x2.5mm magnets. These are strong enough that you only need 4 magnets on each piece (8 total).
The magnet holes are designed as press fit and takes some force to install so there is no need for glue.
HOSE ATTACHMENT LIP
A lip is added to the end of the hose attachment for a more secure fit. There is not even a need for a hose clamp.
SOCKET HEAD COUNTERBORE
There is one existing M3 threaded screw hole on the back of the printer. The hole for this has a counterbore for a socket head m3 screw.
COUNTERSUNK SCREW HOLES
The 3 remaining holes are countersunk for normal wood or sheet metal screws. These match up with 3 existing holes on the back of the printer that you can screw into (no need to cut threads).
Mounted on back of my P1S
