Magnetic Vent Hose Attachment X1C/P1S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attachment to screw on the back of the printer with a magnetic 3" ventilation hose adapter.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ENTILATION HOSE PRINTER ATTACHMENT 3"
A screw on & magnetic hose attachment for the back of X and P series printers.
Screw on the backplate to the printer and add a 3" ventilation hose to the adapter. When you need ventilation you magnetically attach the adapter with the hose to the backplate on the printer and either run the hose out a window or to a filter. I run mine to an air purifier with a hepa filter when I print ABS/ASA as I do not have a window near the printer.
Remix of RandomKhaos model with the following changes:
- 10x2.5mm magnets (only need 8 instead of 16) - Let me know if you need different size magnets
- Slimmer profile
- Counterbore and countersunk screw holes
- Lip added to hose adapter (hose clamp not needed)
10x2.5MM MAGNETS
This design uses 10x2.5mm magnets. These are strong enough that you only need 4 magnets on each piece (8 total).
The magnet holes are designed as press fit and takes some force to install so there is no need for glue.
HOSE ATTACHMENT LIP
A lip is added to the end of the hose attachment for a more secure fit. There is not even a need for a hose clamp.
SOCKET HEAD COUNTERBORE
There is one existing M3 threaded screw hole on the back of the printer. The hole for this has a counterbore for a socket head m3 screw.
COUNTERSUNK SCREW HOLES
The 3 remaining holes are countersunk for normal wood or sheet metal screws. These match up with 3 existing holes on the back of the printer that you can screw into (no need to cut threads).
Mounted on back of my P1S
