Counting matching models…
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
Was looking for a useful way to mount a working light on the P1S. Planning to print the side spool holder , I saw a nice opportunity to add it there. Maybe it's also helpful for anyone else. Had a clamp gooseneck lamp ( Amazon.de ) in use…
I cut off the original's curved sides (using the CG modeler Lightwave 2015) so it could be rotated and printed flat, and removed a big chunk from the middle to save plastic and make it print fast. Very little support is needed for this…
With High Flow Nozzles (CHT) and when printing with PLA and due to the improved heating of the micro swiss hotend you have to adjust the print settings / print temperature and take care of retraction settings etc. because it is really…
Contact me if you plan to use magnets that are not 10mm x 2.3mm and I will alter the model to fit your needs. This will interfere with the stock filament spool holder on the rear of the printer, so an alternative spool location is…
I found this design elsewhere, but the original 3D model quality was poor. I rebuilt it from scratch and increased the depth. STL and STEP versions without magnet holes are included, so the model can be easily modified for the magnet type…
First off: I do NOT advise trying this unless A) you are fairly mechanically inclined/crafty, and B) are ok with potentially boat anchoring your shiny fresh new U1 with no parts availability yet lol parts are available now but still…
This package includes a side organizer that clips under your glass lid of your printer, a hotend cleaner, a X, Y and Z axes cleaner, a AMS and wire disconect tool and a filiment guage.
The Poopy Pipes for those of you who have more than one P1S and need to collect a lot of poop Hardware needed M3x8 to mount a plate on the backside of the P1S I have made the parts in 1.2mm and 1.6mm. The parts in the main picture is 90%…
An alternative door handle for the P1S glass door. (Might fit for P2S as well). No support required for printing. No additional tools or screws required for mounting. It just clips over the existing door handle. Assembly: 1) Open the door…
This 3D model does not include supports; however, they can be added in Bambu Studio. It was printed using PLA filament on a Bambu Lab P1S. The design was created in Tinkercad. I hope you find it useful.
Designed for easy FDM printing, this print-in-place P1S hotend spare box requires no supports and prints as a fully functional case with an integrated hinge. Optimized tolerances ensure smooth lid movement right off the bed. The model…
P1S Miniature – Scale Info A detailed miniature model of the Bambu Lab P1S. The model is designed as a single-piece, single-color print and requires no assembly. Ideal for display purposes. Miniatures of the other Bambu Lab printers are…
i used a .4 noz on a p1s. Not needed but i threw some PTFE on the middle spool holder for maximum slipability! Enjoy!
P1S & AMS Lighted Riser and Hinge. To provide better illumination and reactive lighting the riser uses an ESP32-C3 SuperMini dev board and this firmware at https://www.nixies.us/projects/bambulights/ Use a Chrome browser to program the…
Print the walls pretty thick to make sure it doesn't shear. One of the screws may not fit, but mine didn't and it's still going strong! The screws used are from the "For Scraper" bag from the original supplies. Print Recommendations:…
do not print the mk1 rotator.
I just got the Biqu Panda Breath chamber heater and needed a way to route the power cable out the back. Biqu provide a printable riser, but it is much too tall for my liking. I wanted a minimal riser, just tall enough to fit a cable, and…
Disassembly instructions: https://wiki.bambulab.com/en/p1/maintenance/p1s-front-cover
This model redirects the PTFE tube from the extruder to stop it rubbing on the sharp edges of the enclosure and stop catching on the screws. Why? I was having a lot of issues with the PTFE tube rubbing on the top glass and “shedding”…
I like customizing my printers and so my P1S needed some changes as well. I designed and printed a few new handles for the AMS and printer.
Corner holder for BambuLab printers, so they don't move during printing and sit still in place :) 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
🧊 A clean, functional desk organizer — fully parametric, no supports needed. Printed and tested on Bambu Lab P1S. This is a FREE sample from the Universal Organizer by Modulschmiede. --- ## 🎛 WANT MORE? Free Online Configurator! Customize…
CLICK HERE TO DOWNLOAD LATEST RELEASE FROM MY GITHUB The purge line from the A1 has been spliced into the P1S start GCode. The purge line changes location so it is (almost) always placed beside the print, and is much smaller than the…
Simple filrst layer for Bambu Lab A1 V2 P1P P1S P2S X1 X1C X1E and easy access with pull tab, choose the printer sheet.
Conversion to run a 100mm (4") vent hose through this system.
Slip this decorative handle onto your P1S, X1C, or X1E door as a fun way to perk up your printer! Benchmark your printer with this classic boat, and then as an added bonus, slip it onto your door as an ornamental handle. I designed this…
This adapter does not need the difficult to install heat set inserts. It also removes material that can be used for cable clearance so I did away with the redundant mounting holes and added cable clearance and a pathway to snake the…
Description TPU print profile for Bambu Lab P1S. With these settings, I haven’t noticed any issues, and the prints look very nice. Remember! Adjust the temperature for your filament!
Bambu Lab P1S - Fast Start G-code (47 Seconds) This optimized G-code procedure drastically reduces the start-up time for the Bambu Lab P1S, cutting down the initial procedure from 6 minutes to just 47 seconds. The process is designed to…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
Panels to cover the cable channels running along the top left and right edges of the Bambu Labs P1S 2023 models. The other cable covers I found seem to be made for an older version of the P1S or P1P as they did not fit my machine…
I needed a riser for the top glass of my P1S printer. I wanted one not too high, with vents and LED light. There's a plenty of such projects on Printables, but I couldn't find one meeting my expectations. So I decided to design another…
WIP ---------------------------------------------------- Anyone who downloaded prior to Jan 5th 2024 and have problems with the top glass fitment, please see the Adapter parts added. ----------------------------------------------------…
This contain many settings for PETG There was no support in this print
AMS Riser using less filament，supports LED strips, spool holder, glass top and XTouch
2026-02-12 : Check the size of your OG Cam, if it's 52.2x52.2 like @Negarpls_3674399 mentioned in the comment section, this version might not support your camera. I released the .STEP file, though, if you make the change, share a remix,…
For use with the configuration where the AMS sits on top of the printer. The light attaches to the handle on the printer's glass lid. Quick and easy to remove. Printing: Printed in Bambu PETG Basic (Grey) on the smooth PEI plate with…
Phone holder for controlling the printer. The small P1P display is not touch-sensitive and therefore the settings of the print parameters may quick temperature setting is quite tedious. There are also projects like PANDA that control the…
For me, nothing (except a benchy of course) screams "3D printed" like a print-in-place planetary herringbone gear. So what better to use as a 3D printer's door handle than this little gem of ingenuity? There are two sizes (51mm and 42mm),…
Ich habe für den Bambu Lab X1 / P1S einen Halter für den Xiaomi Humidity Monitor 2 erstellt. Wird mit den original Schrauben vom Griff hinter der Tür montier. Bitte mit Stützst drucken. I created a holder for the Xiaomi Humidity Monitor 2…
This holder provides better access to the Bowden tube on the back of the machine than when using the factory spool holder on the back. I added a filament guide post to provide a more consistent path for the filament between the spool and…
Oversized Lego stud door/top glass knob/handle for Bambu Lab P1S/X1 printers. Thanks to cmaddy there is a 6 times oversized 1x1 Lego stud that inspired me to make this remix. Now the famous Lego stud can, and will be used as a door/top…
Just a quick adapter from 120 to 100. Specifically fits the taper of https://www.printables.com/model/711795-p1s-x1c-ventilation-system I probably could have just remodeled a whole end but the adapter was easier. This converts a roughly…
To save myself from actually measuring the dimensions of the P1 mystery hole, I leveraged just joo' s design. I wanted to hold some specific tools, and I wanted to add some bracing to reduce the deflection of the tool-holdy part. I used…
If you don't want to have a hole in your printer through which both hot air and filament fumes will pass (e.g. ASA,ABS,Nylon,PC) download and print the P1S hole filler to make your printing more comfortable and healthier. And it all takes…
First little disclaimer. This part is not polished, additional revisions are likely. Please provide feedback. =) The idea behind the ribbon version is a lighter part (less than 14g) and potentially less harmonic distortion transferring to…
I found an awesome magnetic chute for the P1S, but it was tiny and didn't really hold all that much waste, so I decided to create this model based off the original. This one is substantially larger (90mm x 90mm x 100mm tall) and can hold…
I created this very basic print plate stand for print plates. The slots are slightly angled so the plates slide nicely in the slots. Also the slots have an 1mm high difference per slot so the plates are more easy so see. I addes 2 holes…
Disclaimer If you are not confident with tackling mains powered projects seek professional advice. I am not liable for any issues that may arise from incompetent or unauthorized wiring practices! Fan The fan was purchased from Aliexpress…
Cost efficient Bambu Lab P1S and P1P feet are intended to minimize vibrations of chasis to improve printing experience and reduce noise. Please pay attention to printer settings: Only flexible filaments. I used TPU A90 Perimeters…
I present a set for lifting the upper window for Bambu Lab X1C, which includes: 1. Limiter 1 - 1 pc. 2. Limiter 2 - 1 pc. 3. Base 4 - 1 pc. 3. Holder 3 - 1 pc. 4. Arm 2 - 1 pc. 5. Pin - 2 pcs. In addition to the above-mentioned elements,…
Minor add-on mod for @jakadel's Bambu Lab X1/P1s 270° hinge This add-on mod if for the original model (required): https://www.printables.com/model/1002569-bambu-lab-p1sx1-front-door-270deg-hinge-upgrade by: @KarlisJakade_1964934 A link to…
I was curious what the enclosure temperature of my Bambu Lab P1S was, but there isn't much room to place a thermometer. I had a round thermometer/hygrometer from another project that was quite small. Now, my idea was to mount it close to…
This is a holder for the Elegoo Air Filter (Air Purifier). It is designed to be mounted in the bottom left hand and/or right hand corner of a P1S. This is used to filter out odors from various filaments. The P1S has a chamber fan/filter…
This is a hydrometer/thermometer bracket for a P1S/X1-C. I printed Thomas' Silica Dry Box for Bambu Lab AMS and ordered the Xiaomi Hygrometer Thermometer from Amazon. Since I'm only using one of the two in the AMS, I figured I'd make a…
An alternative exhaust filter cover with place to mount A1 mini brush (I've used a replacement from Aliexpress ). Add this GCODE after wiping the nozzle on the default brush, but before it goes to ‘exposed steel surface’: ;===== wipe…
Introduction I've recently purchased a Bambu Lab p1s to upgrade from my previous printer (Ender 3v2 with a lot of replaced parts). I have a shelf that I used for the ender and planned on using for the new bambu lab, however I discovered…
If your P1P/P1S is on a high shelf, the display will be perfectly readable.
I found the "Poop" (purge) chutes shared online overly complicated and bulky. My printer sits on furniture with very limited depth so I designed this chute to fit in the space left between a common 90 degree PSU cable and the wall . That…
ENTILATION HOSE PRINTER ATTACHMENT 3" A screw on & magnetic hose attachment for the back of X and P series printers. Screw on the backplate to the printer and add a 3" ventilation hose to the adapter. When you need ventilation you…
I tried looking for a spool holder that allows you to hold 2 spools while retaining the original holder, but couldn't find any, so I designed my own. I'm aware that there's an issue with the holder sagging down, so I might make a little…
Remix of @NilsR_331850 "Magnetic Filament waste trash can for Bambu Lab P1P/P1S/X1C/X1E" to use 3/8" x 1/8" magnets.
I had an extra round temp/hygrometer and wanted to monitor the temp of my chamber when printing things such as ASA or PAHT etc. This mount slides into one of the holes in the back of the chamber and is easily removable. It is just…
Cover for the chamber fan of P1S/X1C. Made to help keep cool air from entering enclosure when printing things where a higher chamber temp is needed like ABS/ASA/PA etc. Uses 4 8mm x 3mm magnets. The two little nubs center the cover via…
Remixed from Bambulab P1S Poop Chute to support for 6x3mm magnets
This is a minimalistic vent duct adapter to connect a hose with 100mm diameter. It has holes for magnets with 10mm diameter and 3mm thickness, e.g.…
Zu aller erst danke ich FPV Smitty für das Grundmodel des Risers. Da ich die Möglichkeit zur Belüftung meines P1S wollte und zugleich einen 2,8" X-Touch Screen verbaut habe, fand ich nicht wirklich passende Modelle an Risern bei denen die…
An adapter to allow the use of a second aux fan on the right-hand side of the printer. You will need an additional standard auxiliary fan, Bambu Labs sell them as spares. Use the screws that come with the fan to attach it to the rail - be…
This is a simple adapter to move the spool position to the left side of the printer for Bambu Lab's P1S. Please note that you will need some 15/20mm M3 screws and M3 nuts to screw the original metal spool holder to the adapter and then…
Poop basket for the Bambu P1S model. The colors can be chosen as desired. Internally on the back there is also a small space for a powerful magnet with a maximum diameter of 10mm. Halloween is the theme of the design. The printing…
Magnetic waste basket for filament waste for the P1S. This uses magnets so works perfectly for users that have a small table with no room in the back for a basket. This is a smaller size, ideal for users with no AMS. This model can use…
"Bambulab P1S Poop Chute" ( https://www.printables.com/model/562746-bambulab-p1s-poop-chute/comments ) - великолепное изобретение, сочетающее в себе эстетику и функциональность. Но так как он находится на задней стороне принтера, его не…
I found this poop chute from V3 Precision a while ago and really liked it, but didn't print it, because it wasn't exactly what I was looking for. I couldn't find something that I liked more, so I decided to adjust this one in order to…
This is a simple mount for temperatur&humidity sensor. You can use this sensor with Tuya mobile app too. Link to sensor: https://pl.aliexpress.com/item/1005005193544757.html Category: 3D Printer Accessories
A simple filament guide so your filament doesn't rub up against your P1S case. Uses 2 M3x8 screws.
I needed some way of extracting the smelly ASA fumes out of my garage. This channels the air from the AUX fan to the outside. There are no additional extraction fans. UPDATE: I added A Y joint to attach another extractor pipe. This one…
Snap fit part with multicolor to plug the hole on P1P / P1S, with a power button sign on it to make the design more aesthetic—also makes it look like a funny copy of an X1C
This Side Spool Holder goes more to the front of the printer than most. It gives free access to the belt tensioner on the back of the printer. Printing No supports needed. After printing the Spool Holder please remove the anti warp oval.…
Filament Waste Bucket, another one…. But it was fun to design in Tinkercad and works well. I think it will fit X1C as well. In comparison with other designs I think this one is pretty light: 0.19 kg. Printing I printed with PLA+, 3 walls,…
## 🚨 CRITICAL MATERIAL WARNING 🚨 This drying profile is ONLY suitable for: - PETG - ASA - ABS ### ⛔ DO NOT USE WITH PLA ⛔ The bed temperature of 80°C will DAMAGE PLA filament! - PLA begins to fuse at temperatures above 60°C - Using this…
Poop chute for the Bambu Lap P1P/ P1S, the poop chute is attached to the back of the printer using 4x 12mm x 3mm magnets. Material required: 4x magnet round 12mm x 3mm Print setting: overhead with tree support
Чтобы настроечный цилиндр, очки, провода и блок питания моего гравера ACMER P1S pro не валялись где попало, я сделал набор креплений. Делюсь с вами, может ещё кому-то пригодится. --- To keep the setting cylinder, glasses, wires and power…
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
Connector for adding ducted ventilation to your Bambulab P1S enclosure. Once printed, glue neodymium magnets into the 4 slots on the back. Screw in two M2 screws into the alignment holes. These don't screw into the enclosure, but just…
I really like the handle on the Jury-Rigged Boomstick remix Shirley Productions did on their original Libra, but preferred the barrels on the original, so I mashed those two frames together and it's a banger. Barrels were also too large…
adjusted holes and arm length to fit to the upper right side of the printer. to install it, you have to turn it upside down
Poop Bucket by Nforce3D Bambu P1S Exclusive club model EN - Thank you for liking my model. I just ask that you follow me, nothing more, thank you and I will do the same. PT - Obrigada pelo o like no meu modelo Eu só peço para me seguirem…
An easy upgrade for your P1S! Instead of moving the spool backwards to remove it, slide it up. Helpful if you want to place your printer against a wall. NOTE: one M3x10 and two M3x6 screws are needed. Remove the metal spool holder from…
![[NEW MODEL IN PROGRESS] aca hurricane for bambu lab p1s,a1,p2s,x1carbon,p1x.](https://media.printables.com/media/prints/55883b49-4d4a-468d-a4a6-6d6f6183a293/images/11966674_69c73a7e-5c14-4dd2-9835-69644495fba5_4653c231-e623-4181-b439-b9ea06d951a2/chatgpt-image-dec-21-2025-08_54_53-pm.png)
![Simple Desk Organizer — No Supports — Bambu Lab P1S Tested [FREE]](https://media.printables.com/media/prints/44d6feac-6fa8-4351-b9cc-23bc5a6e8b96/images/12422466_8d7b3079-6bc0-4198-8965-8c7dd8ae6355_df6db3c2-f320-44a3-82c4-61148b37c080/output.gif)
