1 / 3
UMSS - X1C  and P1 Accessories and Spares — image 1
1 / 3

UMSS - X1C and P1 Accessories and Spares

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Universal Modular Storage System for Bambu Lab X1C and P1 Series of Acessories and Spares

Rating
0 / 5
Likes
66
Downloads
582
Makes
0
Views
6,130
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Standard Digital File License

Disclaimer: Regarding the MMSS, I must say that in this one (UMSS) practically all the modules have been rebuilt, with special attention given to detail and functionality. They have been thoroughly tested, which involved several prototypes until they were perfected. That said, it is possible that Bambu Lab might change some of their parts at any given moment, and in such cases, it may be necessary to review or even create a new version of the module; this has happened before and I know it will happen again... Therefore, if you encounter any defects, I would be grateful if you could let me know before leaving a negative review. I appreciate your care and attention.

Introduction

First and foremost, it is important to clarify that the box with the 150x150mm tile is merely an example. You are free to use it as you see fit; for instance, you can use multiple 150x150mm boxes to store several duplicates of the same piece, or you can use a larger box by utilizing composite tiles.

For the X1C and P1P/S printers, that has a bigger print area, you can go with this configuration and make a bigger box:

This parts can be found at the home project UMSS. 

If some of you need I can make a bit tile with 210x210 (one peace). I've made this first because it may be more flexible.

Where you can find:

  • 2 specific Top lids for each printer: X1C; P1P and P1S;
  • Lateral Labs;
  • 1x X1 / P1 Nozzle with detachable label;
  • 1x X1 / P1 Complete Nozzle with fan and detachable label;
  • 4x Silicon Sock
  • 1x Extruder unit
  • Hexagonal Keys with handle;
    • In the handle for the hex key, there are two things you should keep in mind:
      1. Use small pieces of filament as centering pins for the halves to be glued. This will help keep the two halves aligned, and it may also help them stay in position while the glue sets. Test this, before applying the glue
      2. The two parts should be glued with a few drops of super glue (don’t overdo it) – 3 or 4 drops should be enough."
  • 1x Module for the Hexagonal Keys and nozzle cleaning needles
    • On this module you will need 6 cilindrical neodimium magnets with diameter 8x3mm. You can find them on many places, like amazon and other, or you can by them on bambu lab store whe you there for something else, link here CA008.
    • You can use super-glue to repair a small magnet, but make sure to allow some time for it to adhere properly to the part.
  • 2x Nozzle Wiper
    • Here you  will need magnets. The small pockets on the side have magnets bellow them, they will grab the small bolts that will serve to assemble the nozzle wiper on the printer. This magnets are the same you use on the bottom of the modules, diameter 6x3mm.
  • 1x Hardened Steel Extruder Gear Assembly
  • 1x Bambu Lab original GlueStick
    • Bambu Lab offers products in both small and large versions, approximately 95mm and 100mm, so you should check which size you have in your possession.
  • More to come, and much more already available on other sub-projects of the UMSS (See bellow)

Tags

These tags serve two purposes: 

  • the obvious one is to identify the pieces and relate them to a Bill of Materials (BOM) found on the back of the lid. 
  • Additionally, they allow you to lift the modules if needed, so think of them as handles.

For the best results when printing Tags and other small elements, a 0.2mm nozzle is recommended. This nozzle is a essential accessory of your printer and opens up many possibilities. I highly recommend it!

Additional modules

In addition to the modules presented here, you may add others, but they are available separately to keep everything organized. For members of the 'my club,' access is direct.

Boxes with lid

UMSS Box modules available:

  • 5x3 Box - External dimensions approx. 150x90mm and approx. 144x83mm
  • 5x2 Box - External dimensions approx. 150x60mm and approx. 144x53mm
  • 4x3 Box - External dimensions approx. 120x90mm and approx. 114x83mm
  • 4x2 Box - External dimensions approx. 120x60mm and approx. 114x53mm
  • 3x2 Box - External dimensions approx. 90x60mm and approx. 84x53mm
  • 3x1 Box - External dimensions approx. 90x30mm and approx. 84x23mm
  • 2x1 Box - External dimensions approx. 60x30mm and approx. 54x23mm
  • more to come soon…

You can get them here: UMSS - Boxes with Lid by Jorge

And a nice box with lid that you can costumize to your likings.

You can get them here: UMSS - Boxe with divisions

A1 and A1 mini tools and accessories

There you will find:

  • 2x Hex Keys and pockets for original bambu lab spare bolts;
  • 2x Lubrification tube - original bambu lab maintenance kit;
  • 2x PTFE Tube removable tool, PTFE tubo remover for A1 printers series from Bambu Lab , this new tool is available on the 3mf file here and on the link above;
  • 1x A1 mini - Nozzle cleaner with support base with Sheetmetal cleaner;
  • 2x A1 Silicon nozzle cleaner;
  • 4x Filament cutter;
  • 1x Cut pliers;
  • more to come

You can get them here: UMSS - Bambu Lab A1 Tools and Accessories

UMSS - A1 and mini Accessories and Spares

There you will find:

You can get them here: UMSS - A1 and mini Accessories and Spares

Prusa Tools and accessories

There you will find:

You can get them here: UMSS - Prusa Tools and Accessories

Change Log

  • (13-08-2024) - First Release.
  • (19-09-2024) - Added:
    •  4x Silicon Sock;
    • 1x Extruder unit;
    • Hexagonal Keys with handle.
  • (23-09-2024) - Update to the handles for the hexagonal keys - easy to assemble.
  • (05-10-2024) - Added Hardened Steel Extruder Gear Assembly module.
  • (07-10-2024) - Added Bambu Lab GlueStick

Tags