Counting matching models…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
Spool holder for Bambu Lab P1P. Fits up to 4 spools onto 1 P1P. Clips onto top “rails” and slides with a notch into the corner holes so that it doesn't move around. Beaware the different models, the notch is in different positions, so…
Contact me if you plan to use magnets that are not 10mm x 2.3mm and I will alter the model to fit your needs. This will interfere with the stock filament spool holder on the rear of the printer, so an alternative spool location is…
This package includes a side organizer that clips under your glass lid of your printer, a hotend cleaner, a X, Y and Z axes cleaner, a AMS and wire disconect tool and a filiment guage.
This model redirects the PTFE tube from the extruder to stop it rubbing on the sharp edges of the enclosure and stop catching on the screws. Why? I was having a lot of issues with the PTFE tube rubbing on the top glass and “shedding”…
Corner holder for BambuLab printers, so they don't move during printing and sit still in place :) 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
Simple filrst layer for Bambu Lab A1 V2 P1P P1S P2S X1 X1C X1E and easy access with pull tab, choose the printer sheet.
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
This Printable includes the main mount and switch mount to mount the 3DChameleon Mk3 onto the BambuLabs series of printers. The large Base Mount holds both the 3DChameleon and the Electronics Enclosure on the back of the printer. There…
Buy the Full Vision kit I've teamed up with VOXELPLA to make a kit that includes acrylic panels, printed parts, screws, and tool. The magnets and threaded inserts are pre-installed, so you won't need anything outside of the kit. Shipping…
This enclosure features acrylic side panels and possibility to showcase your P1P in 2 colors. I chose orange to match my current setup :) It uses around 700-800g of filament in total. Please use brim so it sticks to the bed properly ! I…
A spacer for the lid of the ARC Bambu Lab P1P Enclosure so that it remains open. One M3x25 and two M3x10 are required. Ein Abstandhalter für den Deckel des ARC Bambu Lab P1P Enclosure, damit dieser offen stehen bleibt. Benötigt wird eine…
I originally had an old phone mounted on a similar mount, but it was using some freeware, that had not so great quality. So i found the DCS-6100LH for ~9€, and it gives me 1080p, can reccomend for the price.…
This contain many settings for PETG There was no support in this print
Just added 2mm height, my LDO Heatbed has 2mm more in height than voron spec. (Original von Iconic Fab)
Bambulab upgrade - Poop chute D. 120mm x H.184mm x W.166mm Hole for magnet W.8.5mm x H.6.5mm x D.3mm .gcode file are for X1 cabon with AMS multicolor
Simple and easy P1P/S Panda Touch Display Holder. This piece easily slides onto the original display, allowing the Panda Touch to sit next to it. Featuring two attachment points, it conveniently secures the USB cable, providing a neat…
Phone holder for controlling the printer. The small P1P display is not touch-sensitive and therefore the settings of the print parameters may quick temperature setting is quite tedious. There are also projects like PANDA that control the…
To save myself from actually measuring the dimensions of the P1 mystery hole, I leveraged just joo' s design. I wanted to hold some specific tools, and I wanted to add some bracing to reduce the deflection of the tool-holdy part. I used…
First little disclaimer. This part is not polished, additional revisions are likely. Please provide feedback. =) The idea behind the ribbon version is a lighter part (less than 14g) and potentially less harmonic distortion transferring to…
Container is equipped with spring load lock which hold the container in place during printing. Recommended 0.2mm resolution since spring need to stay tight with the guides. Model can be printed in colors as in the picture.
Remix with more Honeycombs reducing the Filamentusage by 15%.
Needed a mount for my imou camera to fit the p1p. Using it to put the live view of my printer in the corner of twitch streams. Will hold by itself on the printer, but for safety it's better to stick a piece of 3m double sided tape like I…
Cost efficient Bambu Lab P1S and P1P feet are intended to minimize vibrations of chasis to improve printing experience and reduce noise. Please pay attention to printer settings: Only flexible filaments. I used TPU A90 Perimeters…
Ich habe habe hier eine druckbare Alternative Seitenwand zu den Acrylplatten des "The Schield Enclosure" für den P1P entworfen Gedruckt mit PETG und 0.2mm Layer Hier der Link zum Enclosure →…
Ich habe habe hier eine druckbare Alternative Rückwand zu den Acrylplatten des "The Schield Enclosure" für den P1P entworfen Gedruckt mit PETG und 0.2mm Layer Hier der Link zum Enclosure →…
I was curious what the enclosure temperature of my Bambu Lab P1S was, but there isn't much room to place a thermometer. I had a round thermometer/hygrometer from another project that was quite small. Now, my idea was to mount it close to…
Made a gridfinity holder for 4 Bambu Lab P1P/S Hotends with the goal of using as less material as possible. That's why the hotends are flipped “upside down” and not lying down. The downside to this is that the holder isn't stackable. Also…
An alternative exhaust filter cover with place to mount A1 mini brush (I've used a replacement from Aliexpress ). Add this GCODE after wiping the nozzle on the default brush, but before it goes to ‘exposed steel surface’: ;===== wipe…
Parts are divided into seperate plates in order to print the the model easier.
Introduction I've recently purchased a Bambu Lab p1s to upgrade from my previous printer (Ender 3v2 with a lot of replaced parts). I have a shelf that I used for the ender and planned on using for the new bambu lab, however I discovered…
If your P1P/P1S is on a high shelf, the display will be perfectly readable.
If your P1P is a little bit to high, remove the top plastic cover, protect the sd card slot and lower the screen
I tried looking for a spool holder that allows you to hold 2 spools while retaining the original holder, but couldn't find any, so I designed my own. I'm aware that there's an issue with the holder sagging down, so I might make a little…
Remix of @NilsR_331850 "Magnetic Filament waste trash can for Bambu Lab P1P/P1S/X1C/X1E" to use 3/8" x 1/8" magnets.
An adapter to allow the use of a second aux fan on the right-hand side of the printer. You will need an additional standard auxiliary fan, Bambu Labs sell them as spares. Use the screws that come with the fan to attach it to the rail - be…
Snap fit part with multicolor to plug the hole on P1P / P1S, with a power button sign on it to make the design more aesthetic—also makes it look like a funny copy of an X1C
I made these spacers to make the P1S more top heavy and reduce vibrations when running fast. it is very effective for the amount of effort/printing time it took! The print is very strong and holds about 15 KG on the pictures. most…
Poop chute for the Bambu Lap P1P/ P1S, the poop chute is attached to the back of the printer using 4x 12mm x 3mm magnets. Material required: 4x magnet round 12mm x 3mm Print setting: overhead with tree support
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
adjusted holes and arm length to fit to the upper right side of the printer. to install it, you have to turn it upside down
Printable numbers that go in the little slot at the top of Bambulab printers, helping you to keep organised. I have included numbers 1 to 5 and the Fusion 360 file so that you can edit it, adding higher numbers etc. Print with rear face…
P1P Pegboard holder, to be used in conjunction with the P1P printer and pegboard shell. It will require supports to print; however, it is an easy print to execute.
The Panda Touch display holder is mounted in place of the old display. The holder itself is the size and shape of the worn display, it is mounted in the housing in the same way as the old display. There are 2 options for running the USB…
P1P pegboard allen wrench holder. Requires supports. I printed it at .20 and 15% infill with supports. It takes a couple of hours on a P1P. UPDATE: I changed the model; it is Allen Driver Holder v18. I eliminated the bottom part and adds…
Clean installation for a 5inch touchscreen (JC8048W550) on your Bambulab P1. Original display will face upwards after this modification. I used a USB Pinboard for Power-Supply to my screen…
this is a mount for a 9x13.3mm switch to mount where there is the hole on top
Design I started from the model Bambu Lab X1 Carbon P1P Poop Chute Purge Bucket made by MK HANNON that I adapted to my need This model fully address the need of having a bucket to recover the poops (purge residues), an efficient size not…
A camera mount for the Unifi G3 Instant that can be mounted on the LCD screen of the P1S | P1P. This camera provides better quality over the stock 720P 0.5FPS camera that comes with those printers. Do you like my models? Consider buying…
This poop shoot just screws onto the back of your printer so it moves with the printer. 1-2 screws to empty seldomly.
I wanted to design a lower profile screen bezel for the P1P as my first test print. This model has a snug fit and small wall thickness compared to other models. I have added finger clearance to the bottom of the part to still allow the…
As there were some people asking for a tilted Version - Here it is ( Original Version ). Clean installation for a 5inch touchscreen (JC8048W550) on your Bambulab P1. Original display will face upwards after this modification. I used a USB…
Inspired by similar solutions, I made a magnetic version with 4 magnets 12x6mm I drilled holes in the original back plate, at my discretion the whole thing is made of petg, the torch broke off because I made it without a chamber, but it…
This is a remix I made based off the TeachingTech xTouch enclosure mod to go over the P1S/P1P control screen. I didn't want to use the xTouch in the original, but I had an old Pixel 3a that I now have sitting in the cradle. Fits over the…
This mod adds the A1 wiper to the P1P/P1S!!! This wiper cover is one of the best designs to stop all the filament from going every ware it shouldn't. The bigger more readily available A1 silicone wiper strips can be found on Amazon here:…
Optimize your Bambu Lab X1/X1C/P1S/P1P printer with this magnetic filament purge chute, designed specifically for printers on raised surfaces. Its closed design retains heat in the chamber, while the magnetic attachment system makes…
Description P1S/P1P and X1C elevated feet. about 6.5 cm high! Just print. Carefully remove the original rubbers. And press it into the raised feet. And then ready to be placed underneath. And now you also have more space under the…
With the rise of klipper conversion possibilities on these machines, I figured why not show it off and proudly present it with a badge. Included are 3 versions, 1 with the klipper logo and 2 with the bambulab logo, one with all the text…
12864 LCD housing and adapter for the Bambulab P1P/P1S! This allows you to put a readymade 12864 by companies such as bigtreetech on your klipper bambulab machines! For cable routing you will have to run the cables first, then crimp on…
Hello, Welcome to my profile, full of models and miniatures :-) I have a Toolbox for Bambu Lab A1 mini for you. They are quite nice and print well. The tools fit nicely in there. It is special for the A1/A1 mini series for 2025 I used…
Design is inspired from other models from the store. The model is made from two parts, slope and removable bucket. On inside side of slope there are three slots for magnets with diameter of 6 mm. Removable buckets came in four sizes: 200…
The Bambu Poop Slide V2 improves printability be adding a back wall to the Bambu logo in the front. This leads to less print errors and a more beautiful final result. Features Collect the printers poop Don't have a mess on your table Easy…
I already was using the Side mount spool holder and now finished printing the peg board side walls. So, I needed a replacement for the clips that held the spool holder on the printer frame. The pegs on the backside contain some missing…
Some of the items out here printables and also in the MakerLab have unfinished or poor design and not fit perfect to the front cover. This is my master file including one test fan duct. Items is printable two parts and easy custom for…
Magnet holder for the Vision Enclosure sidepanels from Aliexpress. The holes have a diameter of 8mm and magnets have 6mm. Added holder for the 3mm door magnets.
Brushes can be bought here . Installation guidance is also provided on AliE. It sounds reasonable to me to buy 10 brushes and print a holder yourself, hence I designed exact same model like on AliExpress. Or it is nice to have a chance to…
My printer is almost against the wall and was converted with an ARC case and a P1S backplate. Since no other poop slide fit properly here, i used the one from erickson85 and widened it a little and cut it off in the right place so that it…
I was looking for a top z-bearing dust cover to fit my P1S and could not find one that fit well. I decided to take some measurements and sketch my own. I wanted something low profile but sat proud so your basic scraper could fit under the…
Poop Chute - Bambu Lab X1C / P1P / P1S Poop chute redirects directly into a waste garbage can. All you need is a little glue to assemble the two pieces. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 2 Infill:…
Design: A Remix of butcher9_9 iPhone stand for the P1P and P1S adapted to Samsung Galaxy S7 phone. The modified cover comes with BL logo or without logo. Choose the one you want On top of redesigning backing and cover for Samsung Galaxy…
Poop chute for a Bambu Labs printer, designed to jettison the waste right into a hole cut into a table that the 3d printer sits on top of. Small fins on the top ensure that the poop chute is correctly positioned behind the printer. Then,…
I wanted a support for the Filler - Filament Holder compatible my P1S with AMS. So I designed a model that can be fixed to the back plane of the printer with both AMS PTFE tube and 4 pins connector in place. It can be installed in place…
After looking over the available options, and there were quite a few of them I really couldn't find any that I was interested in so I came up with this. It's dual purpose, you can set it up right on a desk/table or you can use the M4…
Keine modifikation an dem Originalteil von dreammon li . Zuätzliches Schild für die Rutsche, da bei mir öfter ein poop darüber hinausgeflogen ist.
I had a skadis laying around and was too bored to print the full Bambu pegboard cage so I did these two adapters to fit on top of my P1P. I used standard support on the snug settings. I broke one of the thingy that goes into the hole of…
Poopchute for bambu p1p that uses 3 6mmx3mm magnets to attach to the printer
Bambu Lab P1P/P1S parallel screen base with locking mechanism Same locking mechanism as the Bambu You may need to trim the locking teeth, depending on your printer Compatible with original Shroud
Skadis p1p Hotend Holder Files for 2, 3 and 4 hotends This is a v2 version that is superior to v1 I've published on makerworld
Bambu Lab P1P P1S Hygrometer Mount Here's my Shameless Money Grab: Hey, no pressure—but if you're feelin' generous and want to support my hobby, you can do that right here 😉 https://buymeacoffee.com/mke.dan
Raised cover for greater freedom of movement of the feed hose without using the chain links. With edge for additional LED lighting strip. Erhöhung der Abdeckung für mehr Bewegungsfreiheit des Zuführschlauches ohne Verwendung der…
When printing with low temperature filaments it is usually preferable to open one of the doors to prevent the heat from being locked inside the printer. I modeled and printed this to let the glass top be always open. I printed the bottom…
After a long time of use, my P1 printer has some problems, the print quality is not as good as before even though it is regularly maintained. Recently, I discovered that the gasket between the Z bar and the bearing has been damaged and…
This cutter box is made to fir to the P1P pegboard. You still need the original filament cutter by Fuchsr. For printing the best way is to use organic supports on the pegs. The v2 version has just a little moved pegs if used with my mod…
Simplified poop catcher for our Bambu printers.
I am uploading a simple model, fully printed BambuLab P1S/P1P. This model does not contain electronics, so it is perfect for people who do not like to tinker. As you can see in the photo, there are not many elements to print. The assembly…
Hardware Needed 1) Cap Screw M3x8 - 2pcs Print Settings:~ Perimeter: 3 Top/Bottom Layer: 3 Infill: 25% Filament: PLA/PETG/ABS/ASA Support: Maybe Guide for installation below: Happy Printing! :)
This is a mount for the Tapo C120 camera that utilizes the pill-shaped hole on the top-right corner of the Bambu P1P/P1S printers. It acts as a complement to the built-in camera, providing much higher frame-rates. Have not actually tested…
Hey Everyone! So recently I was doing a Multi-Color Print and it messed up because of the nozzle wiper, I was using a Modified version of the stock one, but it was bound to fail. So I went into Fusion360 and created this nozzle Wiper. Why…
The makerspace that I volunteer at got some Bambu Lab P1P printers awhile ago. I made this model to celebrate our new printers.
Spool holder for Bambu Lab P1P. Fits up to 4 spools onto 1 P1P. Clips onto top “rails” and slides with a notch into the corner holes so that it doesn't move around. Beaware the different models, the notch is in different positions, so…
Bambu P1 top mount, easy access filament holder. Should work with any riser (removed part which was resting on the top od the glass), has 2 screw mounting positions and ptfe holder/passthrough. Square volumes in preview are negatives…
Upgrade to anti-vibration support. To be used with bamboo lab's own anti-vibration rubbers (good value for money). If you want a stable stand with nice aesthetics, this stand is ideal for you. Hinwies (Obs): Take care with orientation.…
Enhance your Bambu Lab printing experience with this premium anti-vibration support! Crafted from durable TPU 95A , this support is designed to absorb shocks and minimize vibrations, ensuring smoother and more stable prints. Its robust…
This is our Pixel Modplate mosaic design for the Bambu Lab P1P 3D Printer, inspired by LEGO Hokusai – The Great Wave. We used Bambu Lab Basic PLA (White, Black, Grey, Blue) and Polymaker Polyterra Matte PLA (Dark Blue, Peach, Earth Brown,…
the anti-sound enclosure by Jumbify has been the second thing on the buildplate about two years ago, and rightfully so! i completed this brilliant design with a lid opener to reduce the need of disassembling and another backplate for full…
![Bambu Lab Purge Bucket for X1 Carbon, P1P and P1S series [REMIX]](https://media.printables.com/media/prints/1128677/images/8560155_78cf52b5-5d5d-40e0-9a0e-cf72de8309eb_a6667b58-1ba0-4e2b-8c2f-8bbf0cb13555/purge-bucket-v1-jc-4-800x600.jpg)
