P1P/P1S Z-AXIS BEARING DUST CAP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I could not find a dust cap that fit my P1S to my liking so I created my own. Hope this helps others!
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 173
- Makes
- 2
- Views
- 427
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I was looking for a top z-bearing dust cover to fit my P1S and could not find one that fit well. I decided to take some measurements and sketch my own. I wanted something low profile but sat proud so your basic scraper could fit under the edge to pop it off easily. I also wanted a cap with a void on the underside to avoid contact with any rotating components.
I printed this model using:
*Bambu Studio
*Bambu ABS filament (PLA/PETG/etc will work- I just wanted a higher temp rating)
*Standard presets should be fine (it was personal preference to change Top Surface to “Monotonic Line” and Bottom Surface to “Archimedean Chords”)
With these changes:
Total Filament- 1.32g
Should you find this model helpful, please like and I will start uploading many other new designs! Thanks!