P1P/P1S Z-AXIS BEARING DUST CAP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I could not find a dust cap that fit my P1S to my liking so I created my own. Hope this helps others!
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 173
- Wydruki
- 2
- Wyświetlenia
- 427
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was looking for a top z-bearing dust cover to fit my P1S and could not find one that fit well. I decided to take some measurements and sketch my own. I wanted something low profile but sat proud so your basic scraper could fit under the edge to pop it off easily. I also wanted a cap with a void on the underside to avoid contact with any rotating components.
I printed this model using:
*Bambu Studio
*Bambu ABS filament (PLA/PETG/etc will work- I just wanted a higher temp rating)
*Standard presets should be fine (it was personal preference to change Top Surface to “Monotonic Line” and Bottom Surface to “Archimedean Chords”)
With these changes:
Total Filament- 1.32g
Should you find this model helpful, please like and I will start uploading many other new designs! Thanks!