Counting matching models…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
This quick and easy to print part can be mounted on the right side z-axis stepper motor to protect the leadscrew. The fan that cools the filament once is its layed down, can blow small pieces of filament to the right side leadscrew and…
This housing bracket is fit for the RS products: 8625329, 8625323, 8625332 and 8625335 It is designed to use M4 bolts and M4 heat-set inserts.
I was having an issue with the leadscrew pin vibrating out of place within the leadscrew block on my Pastamatic machine. This bracket keeps the pin in place within the block and slips easily out of the way in case you need to get to the…
This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.
It's a compilation someone's else designs, modified to be used instead of TR8 leadscrew nut (utilizing the same nut as well). I have added additional 6x3mm magnets (I strongly suggest using the best possible grade neodymium magnets,…
I printed this lead screw stabilizer but it did not work correctly for me. The guide pushed the lead screw out a bit too far and the inner race had no clearance for the bearing to spin. I have also raised up the back face to prevent the…
The prusa use 25mm leadscrew nut, which is very hard to find for anything other than 8mm lead. This template is use to drill 2 extra holes on standard 22mm nut so you can mount it on the stock(or bear) X axis. Use 3.2mm drill bit is…
This version is outdated, use this drill template : https://www.prusaprinters.org/prints/115469-prusa-22mm-to-25mm-leadscrew-nut-drill-template The prusa use 25mm leadscrew nut, which is very hard to find for anything other than 8mm lead.…
Holder for T8 anti-backlash leadscrew nut with holes for 2040 profile
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
This is my attempt at a z-axis triple screw mod for the ender 7, when used with my other mod (will be uploaded soon) to convert the rear mount to linear rails it should lose little to no height in the z-axis. You will have to rotate some…
this platform is made for a 120mm bed, the M4 nut hole at the bottom left is for an optional endstop that I used in my build, is a very stiff bed and uses almost the whole interior volume of the printer, the top pic shows how the rod…
My spools (3DJake) are approx. 70mm wide, so I changed the design from 60mm (with 2 turns) to 2.5 turns. The SHORT version is 160mm long instead of 200mm. The 100mm and 115mm version have the middle of the groove (aka the inner flank of…
This one here is or Trident R1 only R2 is here This is a V2 of my first version which still runs fine in my trident but adds a couple of QoL improvements smaller Z height so there is room to route cables below, also fits nicer with the…
I designed a little leadscrew alignement tool, since I found it difficult to align these with the top when the bed is in lowest position. This one is for the 2 front leadscrews. Move the bed to lowest position , unscrew the trapezoidal…
Reuse your stock two-screw leadscrew nuts with the Ender NG. Features an additional bump to stop the nut flange binding on the spring part of the flexi
Material´s list 1 unit -- Bearing 688 2RS 2 units -- T-Nuts 20-M3 2 units -- Screw DIN912 M3x20 2 units -- Screw DIN 7991 M3x10
Original model by and many thanks to @MZ3D. Bottle cutter with scalpel knife blade, remixed to fit common leadscrews. I also added KRW for my friends out there, along with some other coin varieties.
Imagine never spilling powdered detergent again or guessing how much you're using. This compact and durable 3D-printed dispenser gives you full control and consistency with every load of laundry. This system is built around a TR48x12 ISO…
I whipped up this bracket to replace the rack and pinion drive that the lathe originally comes with. I didn't mind it, but it was too fiddly to feed slowly to get good surface finishes. This is much better. This bracket uses the holes…
I created an easy alignement tool for the back leadscrew of the Prusa Core One. After I finished my build of the Core One I tweaked the front leadscrews using the little helper from user @rinkel.…
Quick test of a threadless leadscrew concept for another project. Made from parts I had on hand to fit a 2.5" guide post. Printed with 0.4 nozzle, 4 walls, PETG. Materials required: 21x15x4 roller bearings M8 flat head cap screws Rod or…
The purpose is to reuse surplus components (if you already have them in stock) instead of buying new ones. You can reuse a T8 leadscrew nut (either pitch 2 or 8 is fine) and a spring with a diameter of 10.5mm. Have fun! The spring should…
Ok, the thing name is pretty long, but it actually describes what this thing is, so... ...here is my adapter to use TR8 1.5mm pitch leadscrews ( https://www.dold-mechatronik.de/TR-Spindeln-8x15 ) with the standard IGUS (…
As add-on of my earlier posted a motorized winder which was a remake / remodel of @GekoPrime's spooler I now add a revised LeadScrewBlock. All of these files are also in my original post:…
Design is still fully @DustinFickert_397996 but creator has gone completely awol and only has a buggy 3MF file uploaded.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8edHfJSzcEW Tinkercad file is a virtual assembly, a couple iterations behind the .stl and .svg files included. You will need 3X the "Leadscrew Small Y…
This is a remixed model designed for 3kg spools with a width of 120mm. Useful for Creality Space Pi Dryer Plus.
Enhance your 3D printer's performance by giving it balls. Totally works.
Glaxy Black PETG used with 0.1mm layers - the parts are so small the print takes no time and they are very visible so good to have a nice finish. They are a nice press-fit.
Just combined a couple of models to get the result i was looking for
I'm reconditioning a old pre war Churchill Redman Cub V1 the cross slide nut was worn out so I made a temporary one to allow me to make a new one from bronze without the extreme chatter. I printed it in ABS as used a bit of grease in the…
I made a mount for Ender3 pro for MGN12C. I highly recommend it for dual screw setup for strong, stable x axis Recommend print from ABS. Print settings: 0.2 layer height 4 walls, 4 bottom- 4top Needed M3 bolts, and heatset inserts
The cover press-fits firmly into place and slopes away from the leadscrew guiding any debris away from it. To form a dust-proof seal against the leadscrew some foam is glued to the cylindrical surface of the cover's center hole. CA glue…
I needed this, so here it is. Might be of use to someone else with an oddball leadscrew nut. Untested. Re-drawn based on STLs, so there may be some slight differences. (NOTE: source files have been released! modify those instead!) Edit on…
I remodeled certain files to fit my laser cut prusa i3 frame with t8 leadscrews. The following are the files. I used the dxf file from the lasercut to adapt it for leadscrews for the top support. Trapezoidal nuts can be thermal melted in…
This is an adapter to be able to use a standard leadscrew nut with the Prusa MK3 stock or bear X axis. You will need 2 ~15mm long M3 screws (or the original screws) to attach the adapter to the x-axis parts. Additionally, 2 8mm long M3…
I make extra-wide spools by combining two Prusa Spools ( https://www.printables.com/model/1629497-prusa-spool-doublewide-adapter ) and made this leadscrew to use in my Pastamatic winder for them. You will probably be interested in this…
As an option. the venerable Myford ML7 lathe can be fitted with an engineering handwheel on the right-hand end of the leadscrew, a very useful improvement. With the carriage lever engaged, one turn of the leadscrew moves the carriage one…
This is a fix for the Makerparts XS printer. That printer has several issues to align the leadscrew for the Z axis. After a lot of test, I developed this kit to reduce notably the wobble and increase the layer quality. Bill of materials:…
This is a (WIP) modification to the RepRap G3D's Z axis meant to replace m5 screws with leadscrews in order to improve accuracy and precision. I'll provide openscad files as soon as I finish and test the pieces. I'm using nema17 motors…
A cleaning tool for Tr8x2, 8mm diameter 2mm pitch 1 start leadscrews. Note that these are not the same as the ones usually on 3D Printers, which are 2mm pitch 4 start. Printed mine out of PLA, 2walls, 15% gyroid infill, 0.2mm layer…
I had a bunch of square T8 nuts I wanted to use for my E3NG build but they needed to have the round nut thru bolt pattern. This jig will let you easily drill thru holes for the square nuts to match the round nut bolt pattern. The photo I…
remade from original part. not fitted yet but looks like it will fit
A Z-Stepper motor bracket for the Ender 3. No shimming needed. Works with Dual Z (2 required, no mirroring needed) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 50-100 Filament:…
A simple pair of indicators that show that your X-Axis is still lined up. Fit the indicators[1] - make sure that the one on the leadscrew is high enough to avoid clouting the fixed indicator. Don't snug down the one on the leadscrew yet.…
Remix Source Files search is currently broken. Mixed from: https://www.thingiverse.com/thing:4318767 https://www.thingiverse.com/thing:3303562 I liked elements of both of these. I did not like not screwing down the guide as done in…
Rat Rig Z-Axis Leadscrew Fixation Hey maker! 👋 Keep your Rat Rig Z-axis leadscrews secure and adjustable with this simple bracket set. Features: One bracket per leadscrew. Flexible adjustment for height and position. Attaches easily with…
Updated design to fit a standard skateboard bearing (608). I figure this size of bearing is common enough that most people might have one setting around. Print Settings Supports: Yes Resolution: 0.24 Infill: 20% Category: 3D Printer Parts
all the modifications needed to use a metric m4 for the Z axis leadscrew Category: 3D Printer Parts
I printed out TeachingTech's Fractal Vise and bought all the hardware for it, only to realize that I'd made an oversight--their model calls for a different kind of leadscrew nut. Rather than try to obtain the right nut, I just decided to…
I am developing an electronic leadscrew for my lathe, which is a device that replaces the change gears with an electronic controller and a motor. This project is a repository of the brackets, pulleys, control panel parts and reference…
I wasn't quiet satisfied with using M8 screws for the z-axis, so I altered the mount to accept an TR8 leadscrew. I also changed the design of the belt tensioner mounted to the x carriage. Print instructions Category: 3D Printer Extruders…
Modified the motor end to add some clearance to the motor that was touching my RAMPS. I also added some clearance for the screws that attach the lead screw bolt. Source here:…
This is a mixup of 3DP and Me's upcoming Klicky dock for EVA3/VCORE-3 with MFBS's Gold Series Leadscrew guides. Remix of https://www.thingiverse.com/thing:5063532 and an unreleased dock for the VCORE3 (will update this when released). I…
Holds the top of a z axis lead-screw. It was designed for a Sunhokey Prusa i3 2015 printer. The part can be used on both z axis lead-screws just by flipping it. The provided STL file doesn't use any bearings, however the OpenSCAD script…
I took the X-axix motor part from https://www.thingiverse.com/thing:1412730 and added the holder for the endstop that Tom used in the Youtube series where he built a "Prusa look a like". Category: 3D Printer Parts
This is a Z-axis leadscrew decoupler designed for a TR8 leadscrew. It decouples the XY plane from the leadscrew. The design is similar to an Oldham decoupler, but uses a dovetail to keep the parts together. It's compatible with the Rat…
Most of the below is just for historical record. This is a deprecated design. See links below. M-bot v.2; https://www.thingiverse.com/thing:3045974 M-bot v.3; https://www.thingiverse.com/thing:3134348 M-bot v.3.5;…
I've modified the prusa i3 mk2 x-end parts to fit the 22mm brass leadscrew nut, easily available from aliexpress, even integrated to steppers. These are similar designs: https://www.thingiverse.com/thing:1920972…
Made for 8mm leadscrews and lm8uu. Check the specification image to see if the leadscrew nut matches yours. The idler is designed for a GT2 belt, meaning dual 624 bearings on a M4 bolt instead of the usual 608 and M8. Source and…
custom part for a 8mm Leadscrew bushing for my sparkcube to fit on the 2020 extrusion bedframe.
This is a adapter for x-end-idler.stl and x-end-motor.stl from Prusa's Github page to fit a normal leadscrew into the holes. I've also included the Fusion360 file for modding it by yourself. Category: 3D Printers
This is my dimensionally accurate, (after many iterations & fails), of the left rear mount required when upgrading to a dual Z axis configuration. I have also included the stepper bracket as mine was modelled using a thinner than the…
This is a re-upload from my Thingiverse page now that I'm locked out of it. Originally published March 30, 2016 to https://www.thingiverse.com/thing:1453325
This is custom coupler for M8 threaded rod, the rod should be screwed into the coupler so it shall have a perfect fit.
Bought a used Vyper with a broken leadscrew support so i decided to replace it using the intact one as a reference. Its pretty minimalist so it does have the snap on cover like the original but little collar that goes around the top of…
12.4.21 I've added a test print showing the layer surface, so it doesn't look like any Z banding is occurring. I also look at the factory endstop switch and there's no clearance for the bottom mount for it. The Z endstop switch will have…
Update 8/14/2016 I'm not using a top bearing for the leadscrews (right now), so I removed that bit to make the upper shaft holders quicker to print. I widened the smooth rod hole by .3mm and added a strain relief gap as in the motor…
stabilizátor osy Z pro Two Trees Bluer Verze bez pomocí šroubů a na dvě ložiska, bohatě stačí použít jen jedno (608) Tisk PLA
Made so you can use a POM leadscrew nut on the VORON Legacy Z leadscrews.
Remix of djos_1475's MZ1_Z_Mount_v14.stl with adjusted holes to fit a different type of lead screw (see imag)
Upgrade for the Hictop clone of the Prusa i3 Print instructions I am building a HICTOP prusa i3 printer but the z axis wobble a lot, so I decided to get the threaded screws straight https://www.youtube.com/watch?v=dy64oB7fG-k but this was…
Print with supports and clean up the hinge pin faces, Use a piece of filament for the pin heat and mushroom the end over over with something. There are versions for pipe sizes 2.2 - 3.0mm but you w8ll need to clean up the hole with a dril…
For Ender 3/Ender 3 Pro: Leadscrew guard with integrated filament guide. No need to screw it down, simply slide it over the Z-Axis leadscrew and let it rest there. Note: you may need to deburr the border of the base plate to properly fit…
This is a completely redesigned z-axis leadscrew knob for the discontinued Type A Machines Series 1 3D Printer. It has the Type A Machines logo on the top, solid hub to hug the lead screw, and a more aggressive design for grip as well as…
This quick and easy to print part can be mounted on the right side z-axis stepper motor to protect the leadscrew. The fan that cools the filament once is its layed down, can blow small pieces of filament to the right side leadscrew and…
This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-) Integrated supports which will snap away with a tiny bit of force. It used to be a very tight fit at the left…
Remix of Kanrogs Clamped MK1 Bedframe to Upgrade a Legacy frame with a single Leadscrew on either side
In addition to my remix of the bearing block for the floating bearing of the Y-axis , I have constructed a bearing block for backlash-free spindle nuts (Anti Backlash) for the Y Axis. This makes it easy to replace the ragged standard…
In addition to my revision of the drive transmission of the Y axis (see here and there ), I have also revised the holder for the spindle motor so that backlash-free T8 spindles can also be used with it. In addition, there is a cam for…
Took some time but I finally got around to an upgrade! So for some history - the 5mm threaded rod for the Prusa Wlison TS was so so frustrating so rather than rework it, I built another printer in 2018. And then my first printer sat on…
I switched out my Z-motor setup(motor/coupler/leadscrew) to an Integrated motor/leadscrew I thought I needed a dust cover for the motor/screw junction, so here's my attempt. I added the Fusion 360 file I printed one in PLA and it spun…
This is a Test for a 3D Printed Leadscrew This is a square thread. It is a flat screw you have to print it flat and diagonal on the surface you need http://dkprojects.net/openscad-threads/ to compile the scad files i used candle wax for…
NOTE: X-MOTOR.STL and X-IDLER.STL are made for 22mm spacing UPDATE 15.5.2016 moved X-stepper mount point 5mm to left for 21mm version (X-MOTOR_21mm_WIDER.STL) UPDATE 14.2.2016 made parts with 21mm spacing for Geeetech i3 pro c UPDATE…
Pillow Block for a 8mm leadscrew nut with two variations Category: 3D Printer Parts
*** Notice *** This model will be discontinued. After many tries, I have decided on a different route which can be found here: https://www.printables.com/model/484885-ender-5-plus-build-plate-mounting-bracket-for-dual As I went from…
WARNING! In order to use this modification the gear guard must be removed! in addition your hand will be close to the gears and spindle! Use at your own risk This handwheel replaces the last gear in the change gear set to enable manual…
English description below Ceci est un petit remix de la modification publiée par Petit_Homard_Breton pour la Dagoma DiscoEasy 200 Il s'agit simplement de couper une partie de la fixation de l'axe X (coté moteur) qui empèche la tête du…
The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…
To prevent the oily leadscrew of my Tronxy X1 to contaminate the filament, I'm using a bit of PTFE tube to guide it. To prevent the filament from having to make a sharp turn, getting bend a lot or touching the leadscrew, I designed this…
Just print 2 of those and snap on the top of the printer. Now you can bump the gantry on them to mechanically align your gantry. You will also need 1 T-Nut and equivalent screw. Ideal for Enders with 2 leadscrew but just 1 stepper driver…
Please note my newer style ones for mounting in V-Core 3.1 stylised holders can be found here: https://www.printables.com/model/1552963-wiggle-woggles-for-lead-screw-guides-for-all-rat-r Leadscrew guides compliment VenterMechs, Wobb e…
These are sturdy leadscrew alignment tools for the Rat Rig V-Core 3 printers. The rear guide is only for use with the earlier V-Core 3 printer with the offset lead screw. These are not required for lining up the leadscrews on V-Core 3 or…
Leadscrew with shorter travel to wind smaller 750-gram spools like the ones from FormFutura, Ultimaker, and others.
Designed to use standard #8 flat head screws, these wall mounted brackets hold stepper motors with a lead screw attached. Great for your workbench to provide quick access to spare parts, plus they look great! We typically print them in…
Leadscrew Guide for the HyperCube Evolution. It fixes the TR8 leadscrew in place with a 608 bearing at the top to improve z layer consistency. This version has a screw-on plate to really fix the bearing in place. I run a non-enclosed…
had issues with the leadscrew binding so i added a place to add an extra bearing
![[MakerParts XS] Leadscrew Fix](https://media.printables.com/media/prints/167103/images/1554426_dc830f03-ebe5-43bf-9849-e09ddf120cd8/large_display_pxl_20201130_025005163_167103.jpg)
![Rook [Legacy] MK1 Clamped Bed with Leadscrew](https://media.printables.com/media/prints/404658/images/3368962_a35c708a-aa18-42bc-9e58-c1946722ae11/unbenannt.png)
