Core One front leadscrew alignment helper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little helper to align the front leadscrews
- Rating
- 4.944 / 5
- Likes
- 620
- Downloads
- 2,459
- Makes
- 163
- Views
- 11,043
- Reviews
- 162
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I designed a little leadscrew alignement tool, since I found it difficult to align these with the top when the bed is in lowest position. This one is for the 2 front leadscrews.
Move the bed to lowest position, unscrew the trapezoidal nut and attach the tool to the leadscrew and the top part.
Then slowly tighten the screws on the trapezoidal nut, do it in small turns taking turns, because tightening one first might overstress.
Uninstall the alignment tool.
Best to print in PETG because of flex.
For the leadscrew in the back, user Tiffi226 made one:
https://www.printables.com/model/1361308-core-one-back-leadscrew-alignment-tool-helper