1 / 1
Pastamatic Leadscrew for 70mm, 100mm & 115mm Spools — image 1

Pastamatic Leadscrew for 70mm, 100mm & 115mm Spools

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Leadscrew for Pastamatic Filament Winder for 3D Jake and Prusament

Rating
5 / 5
Likes
7
Downloads
69
Makes
1
Views
290
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

My spools (3DJake) are approx. 70mm wide, so I changed the design from 60mm (with 2 turns) to 2.5 turns.

The SHORT version is 160mm long instead of 200mm.

The 100mm and 115mm version have the middle of the groove (aka the inner flank of the spool) at 27mm distance from the cog. Please check your setup fits those measurements.

Printed in PETG with 0.2mm layer height.