1 / 1
Pastamatic Leadscrew for 70mm, 100mm & 115mm Spools
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leadscrew for Pastamatic Filament Winder for 3D Jake and Prusament
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 290
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
My spools (3DJake) are approx. 70mm wide, so I changed the design from 60mm (with 2 turns) to 2.5 turns.
The SHORT version is 160mm long instead of 200mm.
The 100mm and 115mm version have the middle of the groove (aka the inner flank of the spool) at 27mm distance from the cog. Please check your setup fits those measurements.
Printed in PETG with 0.2mm layer height.
