Anycubic Mega Zero 2nd Z Leadscrew Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my dimensionally accurate, (after many iterations & fails), of the left rear mount required when upgrading to…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
This is my dimensionally accurate, (after many iterations & fails), of the left rear mount required when upgrading to a dual Z axis configuration.
I have also included the stepper bracket as mine was modelled using a thinner than the standard OE stepper bracket that is fitted on the right side.
If fitting to the MZ2 the PSU will need to be relocated, I have mine free standing now for ease.
Even though there seem a lot of these second Z mounts out there, they are mostly, (99.9%), designed around the Creality printers, which have different screw spacings to the Mega Zero & will cause binding, I know, I've been there done that.
Designed for 0.2mm LH
I use 100% fill for strength & use PLA
Print Settings
Printer:
Anycubic MZ2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100
Filament:
Sunlu PLA
any
Category: 3D Printer Parts