ANet A8 Printed Leadscrew
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Test for a 3D Printed Leadscrew This is a square thread.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 69
- Makes
- 0
- Views
- 521
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a Test for a 3D Printed Leadscrew
This is a square thread.
It is a flat screw you have to print it flat and diagonal on the surface
you need http://dkprojects.net/openscad-threads/ to compile the scad files
i used candle wax for better gliding
the setting is 800 steps per mm
I used this screw till christmas 2018.
As i started to experiment with 0.1 Nozzle size, i thought i need more resolution on the z axis. So i tried to make a new screw with 2mm/rev.
But the difference is from 0.02 per full step to 0.01 per full step. So i dont think its necessary.
Anyway i made the new screw with a zero backlash nut.
this screw has 1600 steps per mm
Print instructions
Print Settings
Printer: Anet A8
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: 0.1
Infill: 20%
Notes:
coupler 0.2