1 / 1
Z-axis-cap for Bambu Lab P1P and X1(C)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Z-Axis end cap for on top of the of the Bambu Lab P1P and X1(C).
- Rating
- 4.857 / 5
- Likes
- 256
- Downloads
- 1,469
- Makes
- 54
- Views
- 3,889
- Reviews
- 42
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
End cap for on top of the Z-Axis of the Bambu Lab P1P and X1(C). Printed in ABS on textured PEI plate in high resolution. The caps are slightly smaller then the hole of the z-axis so they can easily be removed or move/rotate. ABS is used because of high temp resistance inside the X1C chamber. If you don't print in high temps inside the chamber, PLA can be used to. Generic STL file and Bambu Studio 3mf file included.