Counting matching models…
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
Pulley Puller for Dynamic Range X1 Parts: 3D printed beam (1) M3 x 3mm Thread Insert (CNC Kitchen) (1) 15 x 3mm socket head screw
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Made from a carefully arranged 65x52x198 mm block of interlinked rings supported together, this 3D print expands into a chainmail sheet measuring nearly 1.5 meters long and 6 centimeters wide. It was printed on a Prusa Core One. See it in…
Small but handy powder funnel for Luger 9mm and .223 Remmington / 5,56 NATO. Fits resized cases perfectly. Designed to be usable in reloader big hands... ;) Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer:…
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
There are already a lot of other LED-Riser frames for the BambuLabs X1C out there. So here is what makes my version special: gives additional headroom for the bowden hose so filament will hopefully never again break at the extruder when…
Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download
The original wasnt stackable but the one i remixed is. I decided to emboss the LR44 on the model itself. I had no need for the holes on the bottom so i took those out but i uploaded a version with them as well. Its a bit tough to get the…
Gridfinity based Flashforge 3D Printing Adhesive holder 1x1.
Print the first 2 layers with a translucent material and the rest whatever you desire. You could print the entire thing in a translucent material as well. I used a PLA/Wood Fiber blend. This was designed to diffuse the LEDs in a 16x16…
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
The X1C Mount Rotatable Spool Holder allows you to use a “ 608ZZ Bearing Rotatable For Filament Spool Holder ” on your Bambu Lab X1C. The non-rotatable Spool Holder is standard on most Creality Printers. Using the mount a Spool Holder…
There are three parts to this (Left, Mid, Right), all of which are about 2" wide to accommodate wall mounting tape ( This is the one I used). I suppose if you wanted to, you could just print only the left and right parts and mount them…
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
9X18 Makarov stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Rackmount for the 4-port ezcoo KVM 4x1 switches that are recommended integration with PiKVM for controlling 4 machines. Supported devices include: ezcoo EZ-SW41HA-KVMU3P (ideal for PiKVM) ezcoo EZ-SW41HA-KVMU3L
A square I use to cover the uneven surface of the wood after cutting
Default Bambu Studio Settings, No Support Either Version Works Great
This is a custom Gridfinity module designed to hold the iFixit Pro Tech Toolkit in its original case! Built at a 3x5 footprint and twice the height of a standard Gridfinity module (10 units tall), this design provides a perfect snug fit…
a box for cards with a trendy honeycomb pattern
5x12 grid cube holder for board games resource cubes 8x8 mm.
I like customizing my printers and so my P1S needed some changes as well. I designed and printed a few new handles for the AMS and printer.
The square I use to cover the uneven surface of the wood after cutting
Case for SX1262 LoRa HAT Module. Consists of Base and Top.
This is a remix of the hand wired macropad VOID9 by Victor . Instead of the Arduino ProMicro this version fits a STM32F4x1 (aka "Black Pill"). I provide only the redesigned bottom part, please visit the original thing for the top pieces.…
square I use to cover the uneven surface of the wood after cutting
A 1x1x1 Multibin Insert with a 10 mm internal front fillet for easier scooping of content
I wanted to have a Neopixel Matrix i can use as a 12 channel spectrum analyzer. But it can be used for pretty much anything else. The nexopixels are driven by a Raspi Zero 2 in this example but the matrix is generic - just 3 pins →…
Крепление для монитора на трубу 25мм VESA 100X100
This is a mount I designed to house a replacement speed controller module that I used to replace the OEM control board on my Harbor Freight 7x10" mini lathe. The OEM boards have a tendency to burn out really easily when under load, so…
I used the OpenSCAD files by @Monniasza_1787141 ( https://github.com/ostat/gridfinity_extended_openscad ) to generate the chest with drawers sized 2x4. The height of the drawer is 32.5 mm I used Overture Matte PLA to print it with 0.2mm…
components: 1) 4xM2 2) https://vi.aliexpress.com/item/4000559875991.html 3) https://vi.aliexpress.com/item/4000194710902.html 4) https://vi.aliexpress.com/item/1005001861065786.html 5) https://vi.aliexpress.com/item/1005001412953443.html…
Gridfinity 1x1 Slim Clipper Lighter Stand (4 lighters) Clipper Classic Medium CP 21 Printed well on: no supports 3 walls 5% adaptive cubic Kindly, LIKE if you download
Mattoncino LEGO Compatibile 2x1 - STL Questo file permette di stampare un mattoncino compatibile LEGO 2x1, ideale per costruzioni più estese e complesse. Grazie alla sua forma rettangolare, si integra perfettamente con altri mattoncini…
I've completed the LED lighting frame published by Daniel (thanks to him) with a support for AMS that allows you to remove the glass cover without removing AMS. This allows efficient heat dissipation when printing PLA and other materials…
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
Es un soporte para el Nuc de la Fase III de los Punto Vuela de Andalucía. Se puede colocar en cualquier monitor con formato vesa 100, lo normal. Solo se necesitan 4 tornillos de métrica 4 y cabeza avellanada para atornillar la pieza a la…
Quick swap faceplates designed for the GEN2 Decor Drawers by Jerrari Print settings I used (included in 3MF) 0.4mm nozzle 0.2mm layer height 15% infill (gyroid) Seam position: Back (rotate faceplate so seams are on the underside of the…
This tachometer cover fits perfectly onto the Aprilia SX125. It kann easily be put onto tachometer and ignition lock and prevents both from becomming wet in bad weather conditions and even heavy wind. Very helpful, easy to print and looks…
The X1C's feet didn't sit securely on top of my Alex cabinet as it was slightly too narrow (about 6mm). This mount solves this problem by extending the width of the cabinet so that the feet are firmly supported, making it harder to…
I designed a mount, to mount the Crucial X10 Pro ssd under my desk. X9 / X10 (PROs) have the same size - should fit all of these models. The original version is quite snug, so the ssd fits perfectly between the bracket and the table If…
1x1x4U Gridfinity Lite Bin for holding Chapstick Quick Print - No Magnet or Screw Holes Printed in 34 minutes! Holds 4 standard size chapstick tubes Printed on Ankermake M5 with PLA+ with a 0.4mm nozzle at Fast speed Print Settings: 0.3mm…
This is the 45x12 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
Rlaarlo Gladiator ROG1 Dumbo RC X10F(G) Receiver Tray Adapter. This is a reworked tray to house the X10F(G) receiver that allows the larger receiver to fin inside the stock chassis. I used PLA at 100% for the stiffness since this part…
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
Lightweight ruler holder that can be screwed into a wall using M3 countersunk screws. Inspired by this Model by HolzerMax and adjusted to my smaller ruler.
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
a anchor for a 6x10 chain that bambulab printers use, the chain i got from aliexpress was missing this side of the chain, and only had the matching opposite part i needed this to use the Siboor horizontal draghcain parts with an…
To making the handling for our fairy lights a little bit easier, i made this clip. The clip is for perforated plates with 15x15mm holes.
Sony TV Remote Holder TX102U (18mm x 48mm) wall mountable using screws or poster size command strips. No supports needed, print on end as pictured. Holes 40mm spacing.
Snatdard PC case backplate for server motherboard Supermicro X10SRH-CF.
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…
The top of the AMS and the printer door printed in clear filament, the printer itself printed in silver and the other AMS parts and spools printed in black. Assembly is simple, just print the parts, glue the top of the AMS down and put…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Further development of the number board, added a panel for separators
Risers to raise Gridfinity bins up above the baseplate. Useful if you have a bunch of random height bins, but you want them to sit flush on top. Uses standard 6x2mm magnets (press fit). All risers are 1x1, with heights from 1U up to 8U.…
I am a hobby photographer and developed this filterbox for my ND and GND filters size 100x150mm. It can store up to 13 filters. Also 100x100mm filters can be stored but than you have to use the transition plate. Support is required for…
Outer dia. 60mm Inner dia. 20mm Height dia. 15mm Wall thickness 1.5mm Holds around 80g of solder
Default Bambu Studio Settings, No Support Either Version Works Great
Big magazines for a big gun. These are made for the Big Greg and M4M0TH GREG blasters. There are two options, a 9 round mag, which is the highest capacity you can print on a 256x256x250mm print volume. It prints horizontally, diagonal…
A remix of https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization (Gridfinity_1x3_14mm_solid_Magnets.step) This was designed to fit inside an IKEA Alex drawer. The height of the stand + tool is ~12.2cm
This is a remix of the hand wired macropad VOID9 by Victor . Instead of the Arduino ProMicro this version fits a STM32F4x1 (aka "Black Pill"). I provide only the redesigned bottom part, please visit the original thing for the top pieces.…
Gridfinity 1x1 holding 4 Creality nozzles in the square plastic tube, might also hold other brands or other objects: Fitting square sizes: 12.5x12.5mm ~ 13x13 mm
A Gridfinity holder made for "JOKARI Super 4 Plus" wire stripper / automatic insulation stripper with minimal footprint of 1x1. It probably also fits the Knipex one (12 62 180). Other holders I found used at least a footprint of 1x3. This…
Custom roll holder for using M3x10 screws and nuts. The screws and nuts are completely countersunk.
cool haring heart image to use as a coaster or a magnet. 111mmx111mm uses four 8mm x 1.5mm magnets. The filament is Polymaker Panchroma Matte: Army Red, Muted White, Cotton White, Matte Black
So this is an evolution of my 1x1 GR model that just held the display, as I wanted to have a double-sized unit as a temperature and humidity sensor. This uses my ribbed casing design, that has 2 heights at which panels can be slotted in.…
This is a set of blocks that can be used to recreate the Classic Space X1 Patrol Craft released in 1980 at 250% scale. The stl files for this set can be found in the "stl files" folder below. Please use the set inventory on bricklink…
This is the bolt to thread into the Three Jaw Chuck and connect to your drill. https://www.printables.com/model/133491-25inch-three-jaw-chuck I epoxy an M6 bolt and drilled through the 2mm hole and inserted a nail to bond the two pieces.
This mod allows you to replace the original carbon filter, but let's you have up to 5 umbilical cables through the back of your printer. The design allows you to have a clean wiring inside the chamber and let's you manage all the CAN…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 3pcs circle 4x4 mm Neodymium magnets 3pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and…
A simple solution for simple men (also works for women and non-binary people). PRINT IN PETG OR STRONGER. I made this because I couldn't find any designs that allowed access to the ports behind my monitor. It has 100mm of clearance from…
Despite my toaster having its own crumb catcher, the task of cleaning crumbs off my kitchen is never-ending. But not anymore!
Flexible front bumper for an Xray X12. The front of the bumper lines up nicely with the edge of the body. Printing with 100% infill with ABS is recommended.
One leg It consists of 3 parts, 1x body, 2 x rings. When the body is printed, the rings are put on the top and bottom, on the bottom side stick a round 60mm diameter anti-slip tape(in pics). On the top side of the body there is a groove…
Paint Spray hexagon stencil 10x10 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
Adding 5x 140mm fans with two 16x20x1 filters, giving it a large surface, makes noise levels virtually undetectable when running at max 12v. I made 3 of them so far. If I was to change something it would be to replace the panels screws…
Thank you to the original creators. we provide full walled files for this system. All files print on an Ender 3 and 3v2. 220x220 bed size. all files based on the 42x42 gridfinity sizing.
Grille 150x150 honeycomb/Maskownica 150x150 plaster miodu otwory montazowe fi 6
1x1 Multibin Top remixed to hold 16 Volcano nozzles
Original model was close to fit my cable chain but needed a few tweaks.
Since I liked the smaller model so much, I decided to recreate an identical but larger version, for 10x15 cm photos. You can find the smaller version with printing instructions here:…
I had a bunch of 4-pin and 8-pin GX16 connectors left over from previous projects and figured they might come in handy for future toolhead upgrades or repairs. I designed two models: one with a cable escape, ideal if you're using a 4-pin…
This X1C Drag Chain design stands out as the best option for cable management due to several key differentiators, which were identified through a careful evaluation of existing drag chain designs, including the Bambu Labs original and…
Refer to the original post for further model details.
