Counting matching models…
I've been needing a compact yet functional garbage can in my 3D printing workspace for some time, so I decided to design and print one! This waste bin is specifically designed to maximize the full print volume of the Bambu Lab A1 Mini,…
Halberds made for use in medieval/renaissance combat. These halberds were designed for use in the SCA cut and thrust polearm experiment (approved for use as of 2/13/2024). -Print with TUP and Gyroid or Rectilinear infill at %10 infill to…
First I looked at the diadeem and found out that it is much too big. After a few measurements, I scaled the harrart and the axe head to 65%. To make the handle fit into the axe head, I reduced it to 32.5%. But since the harring still…
I tried multiple variations and adjusted the dimensions to perfectly match the JONAXEL. This one is super tight and strong.
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
This extended magazine for Sillybutts' Battle Axe uses only 3 more drum springs to do double stacking and fit 12 shells, and works with or without my full-length MXL mod here . That means it's always fully compatible with all normal…
axe. If you make it please post it here. It also really helps if you like it, or at least comment.
Uses 3 #10-24 screws, a random spring, and a nail Latches ok and is stiff enough for me, but not perfect Print all the mounting parts solid for maximum stiffness Fits -…
Figure size: 75,54 x 49,35 x 100 mm I recommend making your own stand Supports are necessary Illustrative pictures & gifs Possible re-make for your own, non-commercial purposes My private AI model without textures is available for you for…
A wheel and axel for the duplo trailer 14923c01. The parts are presure fit. Axel 4mm Wheel ⌀ 28mm with 4mm axel Printed in PLA with 15% infill 0.20mm layer height, printed laying down with support.
Simple axe from the game minecraft. Suitable for a keychain and easy to print.
Easy-to-print Minecraft diamond pickaxe keychain. Two versions are provided, one with single-sided relief and multi-color configuration. It prints very easily and quickly, making it ideal for children's parties and birthdays. The second…
One set of XYZ-RPW double-bladed axes. For the aerospace engineer/lumberjack with a good sense of direction/humor. Also has the non-bladed zero-support type of axes if that's what you were looking for. 🙄 Note: The roll-pitch-yaw direction…
Firefighter pickhead axe. I used this for making signs and plaques, and the halves print great and can be glued together. You can scale it up to the size needed. I have not printed the whole axe at this time so supports will be needed. I…
The Skull of Satoshi as a Dual Bitaxe Stand. Requires a Noctua NF-A6x15 Fan which is mounted in the bottom of the Skull to keep the Bitaxes cool. Feet to raise the whole thing up included in the files. This print needs supports, tree or…
An easy print of a Badass gnome with axe For best results: 0.12 layer hight, 3 walls, supports on
Remix of FxhDesigns' Axe Magnet model. Splits the handle and head apart so they can be printed separately. I found it works best if you print the handle upright, on the connector, and the head with the magnet side down. The fit should be…
This adorable horse has decided to take a little break, lying down in a calm and cozy pose. With its flowing mane, gentle eyes, and peaceful look, it’s the perfect companion for your shelf, desk, or collection. Great for horse lovers, fun…
Capture a moment of quiet repose with this 3D printable STL model of a Guy Sitting on the Ground. This relaxed posed character is perfect for adding life and narrative to your dioramas, gaming scenes, or miniature storytelling setups.…
Medieval axe for cosplay or decoration. 15-20% infill.. Remember supports! Wanna leave a donation, just follow the link : https://www.paypal.com/donate/?hosted_button_id=L4PM34S6PWBCJ Every donations goes directly into creating model,…
Medieval axe for cosplay or decoration. 20-30% infill.. Remember supports! Wanna leave a donation, just follow the link : https://www.paypal.com/donate/?hosted_button_id=L4PM34S6PWBCJ Every donations goes directly into creating model,…
Medieval axe for cosplay or decoration. 15-20% infill.. Remember supports! Wanna leave a donation, just follow the link : https://www.paypal.com/donate/?hosted_button_id=L4PM34S6PWBCJ Every donations goes directly into creating model,…
Behold, Tharrak the Enthused, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy resin…
Druzzag Axebringer, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy resin printing 🎯…
Be afeared, tis Ogphart Bonebiter, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Bring a little blocky adventure with you wherever you go! These Minecraft-inspired keychains are perfect for fans of the game who want a subtle (or not so subtle 😏) nod to their favorite world. This set includes three models : ⚔ Sword ⛏…
Behold, Dregnar the Reliable, a member of the elite Hookaxe Guard of the Vogland Orcs. Designed for fun and print-tested on the Piocreate Halot X1 - great results, warts and all. Suitable for all Resin Printers. 🗡 Presupported for easy…
Behold, Snorg the Unyielding, a member of the elite Hookaxe Guard of the Vogland Orcs. Designed for fun and print-tested on the Piocreate Halot X1 - great results, warts and all. Suitable for all Resin Printers. 🗡 Presupported for easy…
You probably know the situation: you want to store something on an IKEA Boaxel shelf, but because of the wire design, the item won’t stand upright. This tray is designed to hold four standard soap dispensers.
Stand for Bitaxe 601 Gamma and other versions supports 50/60mm Fan at backside 16-17mm clearance from Fan to PCB generous cavities for nice airflow keeps your bitaxe cool, quite and powerful have fun . Bitaxe Ständer für Bitaxe 601 Gamma…
Ratskin Ganger with axe and gun, this Ratskin scout keeps watch in the depths of the Underhive. This miniature is part of the Underhive Minis collection — inspired by the gritty skirmishes and survival stories of the undercity. Designed…
Quadriga – Modular Cooling Tower for Bitaxe Devices Quadriga is a compact, vertically oriented cooling tower designed to efficiently cool up to four Bitaxe devices mounted on its sides. The system is optimized for continuous operation and…
wood chopping axe If you like it, give it a follow, like and download it, it helps me a lot. Thanks for the support!
cleaver axe If you like it, give it a follow, like and download it, it helps me a lot. Thanks for the support!
I created this model so that I could wall mount the “Stark 's Axe” model created by @ICosplayInsanity . Please see their page for the original model. This is only the mount. I suggest using bicycle handlebar cloth on the indents where the…
This is a digital 3D printable model of Astrid’s Axe from the How to Train Your Dragon Live-Action movie . 📦 Included Files STL (cut for 200mm printer beds) Assembled OBJ file (for easy scaling) All cut parts are placed on the print bed…
🔗 https://www.patreon.com/c/toadstoolweaver Most of my files are FREE, thanks to the incredible support of my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking some nice extras: ✨ Early access…
Léopold II Louis-Philippe Marie Victor de Saxe-Cobourg-Gotha – Buste 🇫🇷 Description (Français) Ce buste représente Léopold II Louis-Philippe Marie Victor de Saxe-Cobourg-Gotha , deuxième roi des Belges, figure majeure et controversée de…
Quick edit to use with 12mm thick by 40mm long board to fit the ikea boaxel.
it is a axe that can be used for decor and it is better to print it white or grey so you can paint it to look more realistic and i could not find good photos of it for the description.
NerdQaxe++ Hydro support. Added model V2: The two bottom anchors have been brought closer together in the center since they are only used for support and thus do not collide with the AM4 structure that supports the AIO head. Much more…
ENG: Kingdome Come Philips One Blade axe item holder ITA: Kingdome Come Philips One Blade ascia porta oggetti
Ritual Cog Axe of the machine cult. Perfect for your toaster enthusiast cosplay. The Axe head requires mirrored parts. You will need a total of 7 Teeth for the axe head. Designed to use a 1-inch diameter, and 6ft long wooden dowel as a…
Forest Axe Mimic - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 Beware the woods where even the tools turn to teeth with this vicious Forest Axe Mimic , perfectly camouflaged as a discarded weapon embedded in a weathered stump. This…
3D model description This is from minercraft. 3D printing settings Download and convert it to g-code then print away!
Store your ice tools by hanging them on the wall in these compact ice tool and ice axe storage slots. Slots are wider at the top to securely hold typical ice axes, and narrow at the base of the slot for thinner ice tool picks. Secure to…
Philips OneBlade & Kingdom Come Medieval Axe Philips OneBlade stand I like things with a medieval theme , so I designed a medieval Axe weapon for the competition, which can serve as a stand for Philips OneBlade & Kingdom Come. Printing…
Unleash brute strength on your tabletop with this imposing Minotaur Warrior 3D printable model. Clad in heavy armor and wielding a massive double-headed battle axe, this horned beast stands ready for combat. The sculpt combines muscular…
Step into the shadows with this Hooded Executioner Reaper , a sinister dark fantasy miniature sculpted for dramatic tabletop presence. Cloaked in layered robes and concealed beneath a deep hood, this ominous figure stands poised with a…
Unleash raw power with this Savage Barbarian Warrior , a brutal melee champion sculpted for impact and dominance. With a massive double-headed battle axe gripped firmly in both hands, this warrior stands ready to cleave through any enemy.…
Its the tinkercad battle axe made dummy 13 compatible.
This heavily armoured dwarf warrior stands firm, gripping a double-headed battle axe and bracing behind a sturdy shield. With thick braided beard, reinforced plate armour, and a grounded combat stance, this miniature embodies the…
A towering fusion of brute strength and primal fury, this three-headed lion beast warrior commands attention from every angle. With two roaring leonine heads flanking a central humanoid torso, this creature radiates dominance and…
This remix modifies the solder stand axle to fit Afrisol brand solder spool. Compatible spool dimensions: - Bore diameter: 21 mm - Spool width: 58 mm Changes made: - Increased axle diameter to match the larger bore - Adjusted axle length…
3D model of the DOTM axe for Optimus Prime Leader Class. The printing instructions are included in the 3D file. The 3D
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
this is based off a medieval battle axe. this is a shell for a bic pen ink refill stick. other pen refill sticks might work. if the refill stick is too long, try cutting off the end of it. 7 inches long. handle is .375 inches in diameter.…
Many existing models are too closed or have other problems. So I simply created my own parametric model in a few minutes in Onshape with a 50° transition angle between the mirror halves. For printing used Sunlu PETG, standard 0.4mm…
This part is designed to fit the Simond Ocelot Hyperlight mountaineering ice axe sold by Decathlon. When using the ice axe, I found that it is pretty uncomfortable to put weight on your hand when using the ice axe as a walking stick. So I…
A dwarven battlehammer or battleaxe or both at the same time. For assembly I recommend using 40mm PVC pipe as a handle.
This Ornate Viking Battle Axe captures the power and craftsmanship of a legendary warrior’s weapon. Featuring a finely engraved axe head and a detailed wooden handle with carved patterns, the design blends historical inspiration with…
I made a fan shroud for the NerdOctAxe so you can change the stock 92mm fans to a larger 120mm fan. There are two options with and without a small vent for cooling the VR. During printing I had some difficulties with the overhang and…
ul need 2 m5 bolts and t nuts as it mounts to the 20/20 i got the sprite adpter and fan cover off printables from @Crazy . i made the adjustable x stop bracket.
This Fantasy Battle Axe Display showcases a powerful medieval-style weapon mounted upright on a stone pedestal, making it an impressive decorative model for fantasy enthusiasts and 3D printing collectors. The axe features a broad,…
This model may need some rescaling and glueing depending on what size you want it.
DOWNLOAD FROM PDF FILE [ Description ] 3D printing Files. This small hand axe is perfect for a Viking or Townsfolk Cosplay. Weight: 200 grams _________________________________ [ 3D Printing ] Minimum Build Volume Requirements: Full Print:…
The Bitaxe NerdOCTaxe bitcoin miner can be significantly over clocked however the 90mm are not up to the task of moving enough air to keep things cool. Additionally 90mm fans are way too loud, unless you want a sever room vibe in your…
This axe is designed to look good and be pretty durable. It is suitable for throwing. Its not very big and have a hole for a paracord so you can attach it to your backpack or somewhere else. Please note that for printing this axe you need…
🪓 Axe Magnet (Remix for 5x3 mm Magnets) A remix of the original Axe Magnet by Waikikiprod, redesigned to fit 5x3 mm neodymium magnets.
I combined the three separate pieces into one piece to offer a simpler version to print for those that don't want to print in separate colors and assemble. My version is very scaled down so the magnets won't fit, I cut up sheet magnet to…
Wanted some half shelves for the same reasons as the original designer, the dimensions you need for these are 6" x 0.5" x (shelf length)"
I was having some ejection issues with the widowaxe, and realized it was because my shells were slipping out of the extractor claw. Gluing these two pieces on solved it, and made low-speed ejection considerably more reliable. Glue them on…
Pretty simple. My rotor shaft disk had a little play so it would get stuck sometimes, I just made the shell ramp a little shorter to give the disk some room to breathe.
Background Waxing your bike chain is a good way to keep your hands and property clean from traditional oil and grease lubricants. It also tends to work longer before needing re-application and extends the life of your chain. After soaking…
Nordic Axe. It may be worthwhile to separate too objects and print separately.. (wood handle [split] and steel blade)
Added a Eggholder to the lovely relaxed easter bunny. The base bunny is AI generated, my Eggholder extension is added manually.
🪓 Minimalist Axe Wall Holder (No Supports Required) A strong and practical wall-mounted axe holder designed for easy 3D printing and everyday use. This design securely holds your axe while keeping your workspace clean and organized. 🔧 Key…
Epic Viking warrior miniature designed for 3D printing. This model was successfully test printed in FDM. Surface details remain clearly visible even at medium layer heights, making it suitable for both beginners and experienced makers.…
