Camp/Throwing Axe Prop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick Throwing Axe Prop I mocked up after going down the competitive axe throwing YouTube hole.
- Rating
- 4 / 5
- Likes
- 68
- Downloads
- 348
- Makes
- 1
- Views
- 1,455
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A quick Throwing Axe Prop I mocked up after going down the competitive axe throwing YouTube hole. It's made to print in two pieces without support.
I've printed it with the following settings:
- .4mm nozzle
- .2mm layer height
- PETG
- 3 perimeters
- 6 layers top and 5 bottom.
Seems sturdy enough. Going to sand and wrap mine in leather later.
For the connection between the two parts I designed it with a .2mm clearance and slots for 8x3mm round magnets. They are a real pain to set in the head side of the shaft. I recommend just super gluing the two halves together unless you want to be able to store it in a smaller space. Pulling it apart and letting it lick together is very satisfying though.