Super Lube Applicator - Thin Tip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Couldn't find a Super Lube Applicator with a pointy tip, so I made this. The end may need to be snipped off.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 250
- Wydruki
- 8
- Wyświetlenia
- 816
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Couldn't find a Super Lube Applicator with a pointy tip, so I made this. The end may need to be snipped off depending on your printer's cooling.
You may have to use a lot of force to get lubricant out, since the end is so small! Used this to fill my linear carriage bearing races, among other things.
I'd recommend 0.2mm layer height or finer, because of the printed threads. Make sure your printer can handle them.
This model was a remix of someone else's, but I cannot find the exact person who uploaded the files.