Grease / lube injector with cap for LM8UU / LM8 / LBBR (8mm) and LM10UU / LM10 (10mm) linear bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx…
- Ocena
- 4,857 / 5
- Polubienia
- 79
- Pobrania
- 622
- Wydruki
- 14
- Wyświetlenia
- 3120
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes.
Just slide it in carfully, press and rotate the bearing - done (see attached video on https://www.youtube.com/watch?v=eEiKf8TaOOQ)
I added a cap so you can leave it on your tube
I also uploaded the step file in case you need different threads than M15x1,5
Update 18/Apr/2019:
Added
- Injector_M14x2.stl for M14x2 threaded tubes
Injector_M14x1.5.stl for M14x1.5 threaded tubes Update 10/May/2020:
AddedInjector_cap_lm10.stl for LMU10 bearings
- Injector_lm10_M14x1.5.stl for LMU10 bearings and tube with M14x1.5 thread
- Injector_lm10_M14x2.stl for LMU10 bearings and tube with M14x2 thread
- Injector_lm10_M15x1.5.stl for LMU10 bearings and tube with M15x1.5 thread
Category: Parts