Chain lube spray shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spray shield fits nicely onto a chain lube can and stops the lube from getting all over your motorbike.
- Ocena
- 4,4 / 5
- Polubienia
- 425
- Pobrania
- 1012
- Wydruki
- 8
- Wyświetlenia
- 5363
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Use case
This part fits very snuggly on a can of Dr. Wack chain lube spray for motorbike chains. I would guess that these cans are standardized, so chances are that the shield works for other brands a well. If not, scaling can be a way to make it work anyway.
Printing
Printing this part is very easy. No brim or supports are needed. I recommend PETG due to its flexibility, PLA is not tested. Use 4 perimeters, that makes sure that the ring is printed completely concentrically. A layer height of 0.2mm is totally fine, even more should be possible.
Please like it if you like it
Your satisfaction is my reward. Please leave a like an/or a make if you like this design.
Happy printing!