Magnetic Can Holder (400ml) Workshop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Standard Digital File License
Installation & Required material
This model requires specific hardware for mounting:
4x Magnets: There are slots designed for block magnets sized 50x10x2 mm. You will need to glue these into the back recesses.
3x Screws: The model features holes designed for 3.5mm countersunk screws if you prefer a permanent wall mount.
Print Settings:
Layer Height: 0.12mm
Infill: 15%
Walls: 2
Supports: Organic Tree. (Recommended for the overhangs inside the magnet slots).
Creation Process:
The model was created in a CAD environment
Photo & Setup Details:
Camera: Xiaomi Redmi 14.
Lighting: Custom RGB Lighting setup used to highlight the surface texture and geometry.