Liczymy pasujące modele…
Design Concept This holder is perfect for keeping aerosol cans such as insect repellent, spray paints, or air fresheners conveniently accessible and organized on the Multiboard or Honeycomb Storage Wall System . It is ideal for use in…
Summary This is a spray can holder with brackets to be used on a IKEA SKÅDIS pegboard. The holder has a 66 degree tilt and is stackable sideways (and of course vertically, depending on what bottle you are using). The holder comes with a…
Reworked the original tripple holder, and made it slightly bigger, to make better compatibility with wither range of cans 7 cans version will also be available Print time approx 8.25 hours, 0.25 layer height Esun ABS+
Made a 7 can version for my service car Print time approx 12 hours 0.25mm layer height Esun ABS+
DE: Moin ich habe hier mal fix was Design für‘s transportieren von Sprühdosen ohne das die caps verloren gehen. es funktioniert super für montana cans und andere dosen. Druckwerte: Material: Pla Infill: 5% Bei Fragen mich gerne einfach…
Nous avons conçu et amélioré un système de rangement pour aérosols spécialement adapté à notre cabine de peinture DIY. Initialement basés sur un modèle existant, nous avons ajouté des modifications structurales pour améliorer la rigidité…
It is recommended to print two for each floor for more stability. Still not sure that the joint fit perfectly because I have not yet printed the second floor Print with 10-20% infill and 0.2mm layer height. No supports needed.
Holder for 3 spraycans/cups etc. for skadis pegboards 69mm hole diameter fits most spraycans i have. Built in hooks require supports Added a 2 can variant
Variety of different magnetic mountable spraycan holders. All 4 fit standard 66mm spraycans.
put some M4 heat set inserts into the folder and screw on the little plastic washer. then you can easily mount them on common heavy duty shelves often used in basements, garages or workshops. I mounted them on some shelves from Obi…
This is my first ever design! I would get frustrated trying to use the flimsy piece of tape used to secure the nozzle for spraycans over and over; it gets dirty and loses its adhesiveness and eventually the nozzle can come loose and get…
Design Concept This holder is perfect for keeping aerosol cans such as insect repellent, spray paints, or air fresheners conveniently accessible and organized on the Multiboard or Honeycomb Storage Wall System . It is ideal for use in…
Design Concept This holder is perfect for keeping aerosol cans such as insect repellent, spray paints, or air fresheners conveniently accessible and organized on the Multiboard or Honeycomb Storage Wall System . It is ideal for use in…
This setup uses a SKÅDIS wall with custom spray-can holders that keep cans upright, organized, and easy to reach. The holders clip securely into the SKÅDIS grid, allowing flexible positioning and a clean, efficient workspace. It’s a…
Summary This is a spray can holder with brackets to be used on a IKEA SKÅDIS pegboard. The holder has a 66 degree tilt and is stackable sideways (and of course vertically, depending on what bottle you are using). The holder comes with a…
Spraycan Wallmount Holder (3 Cans) Inspired by an existing design, but I fixed the flaw: side-pulling cans needed empty space on one side. My shorter cradle lets you lift cans straight out – no side clearance required! Two versions…
Easy to mount spray can holder for 3 spray cans. Printing: Pla 0.2mm layer height 25% infill Remove supports after printing is optional
Habe die original Datei verändert um es an meine eigenen Magnete anzupassen! Außerdem habe ich die untere Winkel Auflage verlängert und verstärkt! KEINE SUPPORTS NOTWENDIG! Magnet: 10mm Durchmesser 2mm Dicke
Customizable holder for spray cans or other metal cans . The can is held in place by the magnet and the weight of the can is supported by the lower part where the bottom ring of the can sits in a notch. Easy to take out and put back.…
Spraycan holder for spray cans or other round cans with a diameter of 53, 58 & 66mm (all the sizes I had in my metal can collection). The can is held in place by the snap-in clamp and the weight of the can is supported by the lower part…
There are many can holders out there but many of them is not usable for mechanics on the move because they do not “hold” the can and stop it from ratteling around in the car / truck. note there is a small recess on the backside for dubble…
Holder / Wall mount for spraycans with a diameter of about 65mm or 2.55 inches (standard sizes.)
Wall mounted spraycan holder, with spot for magnet for better can stability.
Holder to keep the CA glue and activator together. Fits various spraycan sizes, and a 1oz (28.3g) glue bottle. If you print this, a make would be highly appreciated!
Ich hatte das Problem, dass ich in meinem Regal mit den Spraydosen immer wieder den Überblick verloren habe. Also habe ich eine Möglichkeit gesucht die Spraydosen übersichtlicher zu lagern. Das ganze möglichst als Bausatz System, also…
Recomend to print in ABS or ASA Rafts: No Supports: No Resolution: 0.2 mm Infill: 40% Perimeters: 4 Solid layers top/Bottom : 4
A remix to make this holder work with Honeycomb wall storage.
Holder for spray cans holder for mounting on biltema pegboard (or other with 12mm hole spacing 4mm holes, model has 108mm c-c hole and peg spacing) Files with and without lower supporting pegs for wall mounting with screws as well. the…
Remixed this can holder for the HSW because it didnt fit my 400ml and long spray can. modeled after 3D lac
Simple FreeCAD file to generate glue-on tube holders for spraycans. Parameters in the Parameter -Object ( DynamicData ) are: Parameter name Explanation CanDiameter Diameter of the spray can StrawDiameter Diameter of the holes for the…
Thanks Pa Ma for the great design. I modified it to make it mountable with screws there are 8 sizes
Easy to print, no support needed.
