Kasa KC400 Smart Camera Magnetic Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Mount for the Kasa KC400
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a Magnetic Mount for the Kasa KC400 Smart Camera. The magnet is encapsulated so you will need a pause at layer 18 to insert it. Not sure how much it helped, but I did use glue stick on the top of the magnet to help with the filament adhesion.
Uses one 32mm Diameter by 3mm thick Neodymium Disc Magnet.
Amazon non-affiliate link https://www.amazon.com/dp/B0CDPJDHP4 (Last time I purchased these they were a little smaller than the original 32mm by 3mm)
Printed with Prusament PETG Signal White with no supports at 0.2mm Structural with 25% infill. I also added a box modifier to increase the infill to 100% for the "pins".
Updates
4/27/2026 - Added STEP and IGS files for easier remixes.