Milwaukee M18 Fuel Blower air jet nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Milwaukee M18 Blower Small diameter blower for car detailing or to blow in small, concentrated areas.
- Rating
- 0 / 5
- Likes
- 55
- Downloads
- 436
- Makes
- 0
- Views
- 2,753
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
There's lots of cool blower adaptors online, but I needed something more compact with a tighter diameter. I was inspired by many projects and online products to make my own nozzle style. I use this mostly for car drying. I have left this model open for future revisions or if people have a better design.
Print design: The print is ABS material and uses vase mode with a .6mm nozzle. I inserted an image with the details. I also uploaded the project file so you can change material and nozzle diameter/Perimeter. I would highly recommend a larger print nozzle for a faster and more uniform print. (<6 or 8). I have tried with PETG, and it works well. PLA is not recommended. due to temps and durability. PLA+ may work but that was not tested. ABS is the best. I have dropped it by mistake a few times and it withstood the impact.
NOTE: Brim is not needed for PETG only for ABS(for better adhesion)