Milwaukee M18 Fuel Blower air jet nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Milwaukee M18 Blower Small diameter blower for car detailing or to blow in small, concentrated areas.
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 436
- Wydruki
- 0
- Wyświetlenia
- 2753
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
There's lots of cool blower adaptors online, but I needed something more compact with a tighter diameter. I was inspired by many projects and online products to make my own nozzle style. I use this mostly for car drying. I have left this model open for future revisions or if people have a better design.
Print design: The print is ABS material and uses vase mode with a .6mm nozzle. I inserted an image with the details. I also uploaded the project file so you can change material and nozzle diameter/Perimeter. I would highly recommend a larger print nozzle for a faster and more uniform print. (<6 or 8). I have tried with PETG, and it works well. PLA is not recommended. due to temps and durability. PLA+ may work but that was not tested. ABS is the best. I have dropped it by mistake a few times and it withstood the impact.
NOTE: Brim is not needed for PETG only for ABS(for better adhesion)