Rigid Blower Stubby Nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€11.13 – €13.61 net (excluding VAT)
For file: Rigid_Stubby_Nozzle_0.4n_0.2mm_PETG_MK4IS_11h1m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €12.37 excluding VAT (range midpoint).
- Weight reported by the author
- 196 g
- Print time reported by the author
- 11.02 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 174
- Makes
- 2
- Views
- 1,007
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower.
Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that it is strongest in the direction it will bend. I've included a 3mf file so you can see the settings I used.
I used the standard Structural preset, 0.2mm layer height, PETG, organic supports.
There are two nozzle versions. The regular one is 220mm high, and the -10 version is 10mm shorter so that it can be printed using the MK3S.