1 / 5
5015 Fan Blower Silencer - Snap-On
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dampen the noise from your 5015 fan / blower by more than 4dB with minimal flow restriction.
- Rating
- 4.909 / 5
- Likes
- 233
- Downloads
- 1,104
- Makes
- 12
- Views
- 6,237
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Measured dampening is 4dB on my 5015 S1 hotend mount, measured on bed.
There is very small flow restriction after mounting.
See my other model for the 5015 Ender 3 S1 & Sprite Extruder part cooling duct
____________________
Printing instructions:
- printing orientation on bed as shown in pictures
- material: use PETG or better (avoid PLA, due to low heat resistance)
- layer height: 0.2mm or smaller
- infill: 15% or more
- NO SUPPORTS
____________________
Version history:
v1.0
24.2.2023
- initial release