#0040 CPAP Hose Clip in 8 Variants
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip for CPAP hoses 18mm and 19mm in diameter.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 266
- Wydruki
- 3
- Wyświetlenia
- 1114
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I saw a clip design that reminded me I needed a hose clip for my CPAP to prevent the hose from scraping the ground and making noises during my sleep. I keep my CPAP in my night stand drawer to minimize clutter so a hose clip on the side of my night stand makes sense.
Versions Included – 2 sizes - 18mm hose clip and 19mm hose clip, both with these variants:
- WSWN = with screw hole, with nub (keeps the hose from sliding)
- NSWN = no screw hole, with nub (keeps the hose from sliding)
- WSNN = with screw hole, no nub (allows the hose to slide)
- NSNN = no screw hole, no nub (allows the hose to slide)
Notes:
- Screw hole provided is intended for an M4 flat head.
- Pad size is 22 x 28mm, so you can apply double stick tape of your choice. I use a 3M VHB tape that's commonly available.
Recommendations:
- PLA works well for this application
- Print the clip laying on its side for maximum strength.
- 2 vertical walls should work fine, 12%+ gyroid infill
- Due to the small contact area to the bed, you may need a brim of 2-3mm for bed adhesion.
If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!
Let me know if there is another common hose diameter and I can add it here.
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing! (and sleeping)