Multitool third arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multitool third arm
- Ocena
- 4,875 / 5
- Polubienia
- 2237
- Pobrania
- 2986
- Wydruki
- 8
- Wyświetlenia
- 31 182
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The ideal third arm for your workshop or office.
Much more than just a tool. This is the multifunction and electrified tool holder.
Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical tools can be created or modified to mount on this arm.
For assembly of the base arm you will need:
- 4x M6x20mm hex screws
- 6x hex screw M6x35mm
- 1x FHC screw M6x30mm
- 10x M6 hexa nut + one nut per additional tool
For the electrical part (for electrified tools), you will need:
- 12x small zip tie
- approximately 1 meter of 2x1mm² cable
- a 19x13mm switch
- a 5v, 12v or other transformer depending on the electrical components selected
Accessories avalable:
- Strip led light
- Soldering exhaust fan
- Phone holder
Accessories under development:
- Vice
- Wire holder for soldering