Counting matching models…
Prints better when it's right side up with a little support on those bridging areas (the details should be fine when left alone). Standard printing setups, tree support works well with it. Works for 100%, but looks better on 200%
3003 Fantasy Bits Mega STL Collection on Kickstarter 📢 Earn Money with 3D Printing – Get a Commercial License for My Vase Models! 📢 Do you have a 3D printer and want to start making money? Or maybe you run a shop selling 3D-printed items…
In my apartment, I've got an IKEA Kivik couch. I like to use my PC on my large TV from the couch. I've also got a lot of remotes laying around, and the occasion drink. I've got storage and use problems. I had a slim endtable on the side,…
1, 2, 3, 4, 6, 8 & 16 servo arms attachment kit. Universal for microcontrollers servo's; 1, 2, 3, 4, 6, 8 & 16 2cm servo arms // 4.86mm holes 1, 2, 3, 4, 6, 8 & 16 2,3cm servo arms // 4.86mm holes 1, 2, 3, 4, 6, 8 & 16 3cm servo arms //…
Will definately need to be scaled, but could be a viable cosplay suit ; ) When I was stripping the Gauntlet back from the model I couldnt help but go that one step further and attempt to pull the armour out of it. Hopefully someone can…
The Grand Army of Republic's DC-17 Blaster Pistol is known to be the general sidearm for clone trooper officers and other classes as well. This model is life-sized for an average adault male's hand, perfect for cosplaying. Pistol model…
A paint stand for 20 Army Painter paint bottles. The slots are designed for a snug fit for 24.5mm diameter bottles (it should fit both Vallejo and Army Painter). It is in 4 parts to avoid excessive filament usage. Gluing together is…
These are a new forearm and wrist for the Lucky13 Figure to give them more range of motion for gestures. Now proses such as prayer, a Kamehamea, or anything that needed the wrists to turn beyond the initial range is available.
This is a set of boxes with magnetic lids for the armies in the board game Neuroshima Hex. It should be fully compatible with Neuroshima Hex 3.0 and the 2020 Morloch Edition. There is a box for the standard armies (plus the special HQ…
No remix just the stl file for "Army men base" as only a f3d file was available to download. Please like and share the original :)
Simple Mouse Figurine - Perfect Desk Decoration Print this charming mouse figurine to add a touch of joy to any space. Requires minimal supports which are easy to remove, making post-print cleanup a breeze. Enjoy your print and bring a…
Hello, I have a Document Case with a map on the arm holder for you. It is a map holder, on the hand. Suitable for Airsoft, paintball, or other strategic games. You have 3 versions from me - Empty, Atom nuke symbol, and predator symbols.…
The part that is built into the armrest of my 2006 Chevy Silverado 2500HD Duramax broke. Without it, the door panel pulls away from the door when closing it. It's a very simple design but it seemed to work. I just epoxied the s*!t out of…
A tray for the arm of a couch you can place a drink on or keep a remote on a flat surface. The sides are flexable and cover the sides of the couch arm, anchoring the tray in place. print with brim and open chamber door to prevent warping.…
These models are inspired by the tools used by the Mandalorian Armorer in the Mandalorian. The pliers feature articulated joints , allowing them to move after assembly. The hammer has been separated into multiple parts , making it ready…
A hinged metal arm for 3D printers, simplifying cable management with durability and easy maintenance in mind. Based on the open-source PRUSA SwingArm, this short, hinged metal arm guides a sleeved cable bundle (or a USB/CAN cable). The…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Stylized low-poly dragon in a seated pose wearing detailed…
An unsettling presence suspended in silent levitation, this multi-armed humanoid entity embodies otherworldly power and unnatural grace. With four elongated arms extending outward and a calm yet haunting expression, the figure appears…
Tiny farming simulator logo for decoration of your home
"I've jumped from higher places." -Nea Category: 3D Printing
I was not happy with the original 'clip in' mount of the LED strip mounting arm, so I remix the arm that its screwable with a 12mm DIN 912 M3 screw and a normal M3 nut. I just uploaded the remixed arm, if you also need the other parts,…
A small charm modeled after the one Katara wore in Avatar the Last Airbender. Sorry about the color I only have red PLA right now I would have printed in blue but guess I'll just have to settle for painting it. Printed with generic red…
This simple rotating arm is designed to glue to a servo arm, which is then mounted on a servo placed in the Servo Insert frame . The insert fits perfectly into the BitBot XL Frame 2.0 , creating a complete setup where the bit:bot…
recomender 0,16 layer height 3walls 15% infill
Inspired by this holder https://www.printables.com/model/173790-paints-holder-for-the-army-painter but designed as a press fit that does not require glue or really any post processing, just slide the pieces together. Once the top clip…
I don't condone or condemn AI, but I feel if you used it for a model you should make people aware. I did have to clean it up a bit, but it turned out pretty well. Powered by Image-to-3D from MakerWorld…
A set of replacement knobs for American Farm Works branded electric fence chargers. SVG files included for OpenSCAD customization. Layer height: 0.15mm Infill 25% Perimeters: 3 No Supports
You are able to organize a team to cooperate more efficiently. Category: 2D Art
In medieval Bohemia, a man’s blade was his honor. Today, it’s his OneBlade. This model combines the world of Kingdom Come: Deliverance with Philips OneBlade into a functional medieval armory for your bathroom.
A pair of earrings inspired by real pharmaceutical capsules. This model is designed to match the proportions of actual capsules. If you prefer a flatter and more stylized version, you can check out my alternate model here . Bill of…
This model is a 3D-printable guantelet/forearm armor designed with a focus on simplicity, modularity, and expandability. The overall structure is made up of clean, easy-to-print shapes that minimize print time and support requirements,…
This cat-shaped armrest table was designed as a practical yet playful sofa accessory that combines everyday function with a decorative and memorable look. It offers space for a cup, a phone, a remote control , and other small items ,…
give your Buddy 1.0 a a few extra hands.
Requires 5.5 mm ball bearings, MG995 and SG90 servos, and a microcontroller such as an Arduino…
Printed fine with PLA+ using: 0.4 nozzle 0.20mm layer height 3 walls 20% 3D infill (Gyroid or Crosshatch) I wouldn't recommend regular PLA, the force needed to press in the capsules might snap more brittle filaments.
This is a couch armrest table designed to hold basic stuff like drinks, books, remotes, and phones! There are two cupholders and the rest of the table can be used for the other stuff. There is also an add-on for your crochet supplies like…
a small indicator light to show which implement is being selected. For the colloring I used 2 layers of standard white. I've a standard printer with just one color, you could pause the g-code manualy and swap out the color. With 2 layers…
I installed the RowPower Connect IQ data field on my Edge 830 so that I can record my SmartRow workouts on Garmin Connect, but had no good way to mount the computer where I can see it. So I designed a simple adapter plate that holds the…
The factory headrest in the vertta pro chair pushes my neck very forward making it uncomfortable. This version brings it back 3,5cm improving ergonomics. The tolerances in this model could be a little bit better as the prongs don't fully…
is for mMy designakers to share their love of making by wearing this shoe charm. The simple message "I AM A MAKER!" is available to print, wear, and express yourself with. Feel free to modify and remix to make it your own. Print Settings…
A replacement arm for toy parking elevator. Printed with PLA. Designed not to need support for the screw hole, only for the arm. 0.2 mm layer height 0.4 mm nozzle
Print these instead of the default arms if you are using the Bigtreetech Manta M8P (V1.0, V1.1, V2.0)
is for mMy designakers to share their love of making by wearing this shoe charm. The simple message "I AM A MAKER!" is available to print, wear, and express yourself with. Feel free to modify and remix to make it your own. Print Settings…
Cup holder for my lawn chairs with 26mm tubing Category: Outdoor & Garden
Deutsch: Es handelt sich hier um einen Schlüsselorganisierer im Schweizer Taschenmesser Stil. Ich war es leid, meine Schlüssel auf herkömmlichen Wege lose in der Tasche baumelnd zu tragen, da mir andere Modelle in dieser Form jedoch nicht…
I removed the split compartment in the front and the hole for the USB cable. I have my wifi dongle for the Android car in the arm rest, hence my USB is used anyways and I don't need to feed the cable through and I have the option of…
A simple armed freighter (self-designated Feisty-class). This was an experiment in using casemated cannons (instead of turrets), of which this ship has four casemates in the forward superstructure for self defense. There is also a…
Designed to fit the Army Armament R504, but probably fits other HiCapas as well, as long as they have a threaded hole on the mag release. You will only need a small screw to fit the hole. Included are 3 STLs, a plain one, one with…
Die Armverlängerung besitzt eine kleine Hand, mit der man sich selbst sehr gut am Rücken kratzen kann. Wenn man es größer drucken möchte kann man es im Slicer in Teile schneiden lassen. Das funktioniert hier auch sehr gut! The arm…
"This wedge will allow you to use your armrest without the ratcheting mechanism catching. Easily just remove the trim piece with vents. Remove the M6 screws holding the ratcheting arms. Install this wedge with M5 flat head screws. (You…
The original Mercedes Star on my kids' tractor disintegrated, so I created a replacement one. This is for the Rolly Toys FarmTrac MB 1500 / MB-trac.
This is a simple ring to keep the lid closed for my Vaporesso Armour S. I'm sure this will fit a lot of other tanks as well with similar issues of falling open due to a faulty latch design. The step file is a blank ring, the STL has…
Lenin charm for your crocs Print with 0.12-0.16 mm layer resolution and tree supports.
A replacement for the broken arms of a Gravitrax Catapult. Print Instructions: Simply import these two models to your slicer and cut the models in the centre. Thus, each model prints as 2 parts that can be glued together. It also works…
The model shown in the image is a 3D design created with geometric patterns and symbols. It features a circular structure with stylized arrow shapes extending in four directions, symmetrically arranged around a central point. Such symbols…
The drawback of this arm is that the screw securing the arms can break. I have designed a replacement for this screw.
I really love the look of the realistic octopus head by Stanos , but I wanted the nice articulated arms like those from McGybeer 's octopus. While looking around, I realized I could combine everything and even add longer arms. Since I…
Patche SWAT na MOLLE vazbu jsou vysoce kvalitní a odolné nášivky, které lze snadno připevnit na jakýkoli MOLLE kompatibilní povrch, například na taktické vesty, batohy nebo další vybavení. Díky specifickému designu MOLLE systému lze…
3D Print Files in STL format of the B-01 Tactical Armor from Helldivers 2. HELMET FINISHING TUTORIAL: https://youtu.be/cjfoUQzFuPM Default scaled to someone around 6' tall and 200lbs. The armor includes a few versions of various parts!…
I broke my ACXWA steering arm on my miot and i got a 3d printer so i remixed it with a wider head and bigger holes. If the steering binds at full lock use a zip tie (check image) and that should work very well. Also you its a high…
Also comes with a stand adapter on the back, should be easy enough to delete if it's not desired. ========== Added 200% version (remember to scale up) and stackable version for whatever reason ========== Added reinforced version to fix…
My watch was always laying on the floor, desk or hanging from the computer while charging, so I made this stand. I wanted it functional : The forerunner 955 stands on it while charging but even if the USB is stored wrapped around. Other…
Flush mount design Hidden fasteners to mount the bracket Just press the google unit into place, FRICTION does the rest!!!! (IF your machine runs true to size, just print it.. you MIGHT need to scale in slicer for a tighter fit IF you run…
debes pegar en la tapa de abajo la lamina que hace contacto con la bateria en el polo positivo para que no se mueva dentro con el uso
A gridfinity holder for storing multiple Raspberry Pi in armour cases. Also has slots for two Raspberry Pi Pico. I've included the original Fusion 360 model. Could be tweaked so that you can also store microSD cards as well. Printed in…
Uses a stanley tape holder clip and 6-32 nut and bolt. Printed with PETG. I did have to drill out hole bigger for screw and I pressed nut in with hammer
This arm guard starts at 8cm and expands all the way to 31cm! I do not recorment printing with supports. I printed this model with the A1 Bambu Labs printer on 0.16mm wall thickness, but 0.3mm should work.
blade arms or blade elbows for dummy 13 , for blade elboy you need to cut the defaul elbow in the arm and attach the blade to the arm , then push it until it clicks in place. there is an image so you can see better
Ukraine's coat of arms is formed by a single azure field, featuring a preheraldic monogram linked to the 10th-century Riourikid dynasty and other heraldic elements extending to the 15th century. This monogram is described as a trident. It…
I designed this mounting system to help me position a phone, a small camera, or even a flashlight while working in the workshop. It keeps my hands free to document projects, capture overhead shots, or simply provide better lighting where…
Here's my take on the pocket clip for Swiss Army Knives. The clip threads on to the corkscrew and holds the knife securely in your pocket. There's two versions: V1 is for regular SAK - here the clip rests on the side scale and allows a…
! I threw this together in like 5 minutes, do not be surprised if it does not assemble correctly ! For assembly instructions, just follow the normal Dummy 13 assembly guides, of course print 2 extra arms but no major changes for assembly.…
Mount for garmin edge devices that clamps on to 35mm handlebars and sits in the middle over the stem. Very durable and won't rotate or break even on the roughest downhill tracks. The top clamp (blue in the photo) is designed to break in a…
Simple Mouse Figurine - Perfect Desk Decoration Print this charming mouse figurine to add a touch of joy to any space. Requires minimal supports which are easy to remove, making post-print cleanup a breeze. Enjoy your print and bring a…
Dummy 13 Armor Head may need to be scaled down slightly to fit inside helmet.
Good morning, Welcome to my profile, full of models and miniatures :-) I have Pokemon Charmander for you, just for fun. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If by chance the…
This is a simple pointer that fits nicely onto a technics axle. I use it with a gear reduction and limit switch to test automation projects.
This is a simple line art Christmas tree ornament I made depicting the iconic Armenian monument titled “ We Are Our Mountains ”. It is also endearingly called Tatik yev Papik (i.e. Grandma and Grandpa) by the locals. Please see here for a…
This is a line art Christmas tree ornament I made depicting the iconic Armenian monument titled “ We Are Our Mountains ”. It is also endearingly called Tatik yev Papik (i.e. Grandma and Grandpa) by the locals. Please see here for a…
This is a line art Christmas tree ornament I made depicting the iconic Mother Armenia monument, located in the capital of Armenia, Yerevan. The diameter of the ornament is 76mm. The bottom portion is 4mm tall and the top is 1.6mm, so…
Mit diesem Adapter können auch Giantarm Spulen mit einem Durchmesser von 195mm im Creality CFS genutzt werden :-) Zum befestigen einfach etwas doppelseitiges Klebeband unter die Flügel.
I have the Decathlon camping folding armchair and I was pretty annoyed at how the armrests aren't real armrests because they would slip down if you tried resting your arms on it, so I made a stopper that snaps onto the metal bars. Can be…
Starwars Armada Stands do not display well, taking up a lot of space. I designed this stand specifically to allow me to mount several capital ships above the super star destroyer model.
Star Wars Armada stands do not display well taking up a lot of space, especially for the smaller ships. I designed a modular system for displaying the small to medium ships with a ton of possible combinations. Enjoy
I have closed the shaker in by 2mm either side. Because of this mod, and the fact my toolhead was pushing the shaker back too far, I also extended the shaker arm by 5mm - this allows the Xol to sit back at 0 on the X axis when shaking. I…
This is a revision of the camera arm that Boogie had provided to serve as a base for people's own designs. I extended the length of the camera arm and added a bend to create a viewing angle. It should be printed in PETG at 30% infill; if…
Give a hug to someone today. I can be a keychain; hang me on your backpack, car keys, bags I can be a charm; thumb tack me somewhere in the house. Hug in a Mug. What funny positions can you put my extra long arms in? Super cute and fun…
Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…
I made a simple charging stand for my Epix 2 PRO 51. Using the original charging cable. It should also fit the Fenix 6/7/8 (please let me know). Added version with thread lock (nut print 0,12 mm layer height). 4mm hex.
3003 Fantasy Bits Mega STL Collection on Kickstarter 📢 Earn Money with 3D Printing – Get a Commercial License for My Vase Models! 📢 Do you have a 3D printer and want to start making money? Or maybe you run a shop selling 3D-printed items…
This is a 3D-printable mold for casting a concrete teapot warmer designed to fit the IKEA RIKLIG teapot. The stand not only provides a stable base for your teapot but also features a built-in space for a tea light candle, allowing you to…
I made 3 upgrades for the Heat insert press, which is great by itself and I recommend it. I really like it. I have printed all on Prusa MK4S or XL with 0.4mm nozzle using 0.20mm layer height. As material goes, you can use anything you…
Side mount for Ikea Office chair replacing the side rests. The arm rests was annoying as the prevented the table from getting down to right height.
