Ringmail System ⚯ Linkmail Armor/Cloth
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.56 – €0.68 net (excluding VAT)
For file: ringmail rings x10_0.1mm_PLA_MK3S_48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.62 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 48 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Specialized ring/linkmail armor pieces. Solid rings linked by long links with snap-on locks. Super strong & flexible.
- Rating
- 4.933 / 5
- Likes
- 1,954
- Downloads
- 2,292
- Makes
- 18
- Views
- 30,185
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop
This system uses 3 pieces:
Rings - Solid rings, especially .10mm layers are almost unbreakable.
Links - Oblong links that connect the rings in whatever pattern you want.
Locks - Clips that hold the links closed tight and multiplies strength 5X.
The links have an overlapping Z that when locked with a clip allowed a link to hold over 15lbs (video below) This is the key to super stength. In the image and video you can see the link wildly distorted before the link opens. (2.2mm thick, .10mm layers, Prusament PLA My Silverness.
Why .10 layers??
.10mm layers have been proven to be the strongest, so that is my default.
Feel free to make your own .15 or .20 gcode, but know strength will be reduced.
For infill I just run max perimeters so it's solid and strong as possible.
BUILT for MK3S so you may have to scale down slightly for your printer.
I created the models as strings to help keep them on the build plate and if one comes loose it doesn't ruin the whole batch. This is to help with overall success and you can go without if you like, raw models added at the bottom of the files tab.
YouTube Link Destruction Test Video:
– These rings and link are 2.2mm thick PLA! – Not bad!
