Tarmo 4 Output bell housing upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.41 – €0.50 net (excluding VAT)
For file: OutputBellHousingNEXUS_0.4n_0.2mm_PLA_MK4IS_26m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.45 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 26.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Output bell housing upgrade with M2 CHC screw for the Tarmo 4 RC model
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 25
- Makes
- 0
- Views
- 646
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I designed this new version of the Output bell housing in the differential of Tarmo 4 RC car.
I simply noticed that it would be better to use a M2 screw for the power transmission instead of a steel wire. So you can transmite more power and have a more professional look.
You could see on the picture that I lost one of my dog bone, but the outpout bell housing are still in place in the front of the car.
Printed on a Prusa Mk4 in Azure blue Prusament PLA.
PLA seems to work on the differential side of the car due to losses inside it.
I recommend the use of PC Blend : Better heat resistance so less deformation under stress. PC is also better with a lower friction coefficient than PLA.
I tried dog bones in PC and PLA. PC dog bones are still ok after 5 hours of running and 4 runs. PLA dog bones were lasting about 1 hour and one run only (over heating due to friction and finally break under torsion stress).
Printing parameter :
10 perimeters
No supports