Counting matching models…
I saw that the screw holes on the TPU Chasis Front Bridge on my Cramer Truggy were getting a beating, so I thought I'd make a cover that would protect the screws holes and look good at the same time, similar to the rear spoiler. PS: I…
Print approx. €0.90–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Hi guys! This is my new project, a new version off my fully 3D printed RC Truggy. To access the video just click on the following link: https://youtu.be/3EKjxC_QTTY This is a very versatile car, all terrain and very fun to drive. Along…
I have had trouble with the original dogbones and joints binding on the Cramer RC Truggy when the suspension was extended and during sharp turns, resulting in cogging and snapped wheel joints / dogbones. This is a remix of the excellent…
This is remix of original OpenRC 1:10 4WD Truggy Concept RC Car Rims. I used HobbyKing tires: https://hobbyking.com/en\_us/hobbykingr-1-10-monster-truck-10-spoke-black-wheel-block-pattern-tire-12mm-hex-2pc.html And adjust create new rims…
Arrma Kraton 6s Rear Mudflaps These mudflaps fit beautifully on the rear control arms of the Kraton 6s with the existing screw holes (you need to put a little longer screw into the hole which connects the stabilizer rods ) I printed them…
Hot Rod body for Open rc truggy. it for testing, i dont have openRC chassis. V 1.1 little modify with flanges and front grill Print instructions Unassociated tags: car body, hot rod, open rc, openrc truggy, rat rod, rc car, rc vehicle…
Horizontal stand for the Dukedoks Cramer Truggy , ideal for servicing such as differential repair or for display/storage. The car is held in place by holes for the chassis screws and by cut-outs for bumpers. You will need some M3x16…
I designed these shock tower brackets so you can attach the shocks to the body instead of the upper arm. This gives the shock more use and more stability. You can still use the original shocks that were advised in the guide (98mm I think…
The original adapter has a large space between the wheel and the adapter. I enlarged the adapter so that the wheels fit
Dukedoks cramer truggy shock absorber https://cults3d.com/es/modelo-3d/juegos/cramer-truggy-rc-4x4-full-3d-printed
[·._.·[ V5 JLB CHEETAH RC CAR TRUGGY 1:8 ]·._.·] Voiture RC ultra performante à l'échelle 1/8, imprimable en 3D, utilisant des pièces standards JLB CHEETAH J3.Le design est amélioré et beaucoup plus durable que l'original. Easy Fix,…
This is a printable replacement for the HPI E-Firestorm and Firestorm Servo Saver. You can use it with the original HPI parts like the spring, metal sleeve and nut. It was designed due to the spare parts shortage for HPI models. I printed…
Hi Buddy It’s no shame to race on a budget! If we help each other, we keep the racing community alive. Because i want to start with rc racing and can't effort all of this tools that you need or may want. So i designed my own Droop gauge.…
Cramer truggy steering arm. After pushing, use light force to loosen the joint.
I really loved this hotrod body Open RC truggy HOT ROD body (for testing!) by mochr | Download free STL model | Printables.com Made by @mochr And i wanted it for my cramer truggy, so i made som body posts for it. I made them out of TPU so…
This is a spoiler GoPro mount for the famous Cramer Truggy 4x4 RC car of Duke Doks https://cults3d.com/en/3d-model/game/cramer-truggy-rc-4x4-full-3d-printed Added the V2 version with smooth angle to avoid break and moved th support…
For a university project we had to design parts for the OpenRC Truggy. Our group focused on generative deisgn with integrated functions for the rest of the chassis. We used Autodesk Fusion 360 and Autodesk Inventor. This part is our…
This is a slight mod to the diff-drive-shaft gear coupling to reduce tolerances, chances of shear and glue failure. Kudos to the original design STL file CRAMER Truggy RC 4x4 Full 3D Printed 🚗 ・3D printer design to download・Cults amazing…
Cramer truggy regulator holder
I could not remove ball joints from my shocks so I've remade @GetItPrint3d brackets. Also the rear one was not fitting great with the base, so I fixed that. This version also need heatset inserts for the screw. For this to work you will…
This is a battery cage to securely accommodate a small 2S LIPO battery inside of a 1/16 RC Vehicle. Please Note Using A 2S LIPO May Increase The Vehicles Speed If It Does Not Come With One When The “Large” Cage is installed in the vehicle…
Bonnet for Cramer truggys. Modified lower bumper from the original: https://dukedoks.com/portfolio/guia-cramer/
This is a replacement suspension bracket for the Absima Truggy AT2.4. Print a few and take them with you on the track. Want to buy me a coffee, because you appreciate my work? :D No problem → Over here please.
I make this motor mount bracket for belt mod to run with 540/550 brushed motor. It helps plastic withstand high heat longer. Enable muanual support under L shape Print with PC or Nylon You'll need 40x40mm metal bracket Specifications:…
A 1:1 replacement for the front suspension arms on the SST Truggy Printed at 0.2mm on the Anycubic Kobra 2 Neo I used PA12+CF
Introduce your model, create build instructions and add print tips... OK! Introduction This another option for body of cramer RC truggy: https://www.printables.com/model/1274256-cramer-truggy-rc-4x4-full-3d-printed Also, I created a small…
This is a steering lever for the Absima Truggy AT2.4. Want to buy me a coffee, because you appreciate my work? :D No problem → Over here please.
This shell fits on Truggy created by Niko. You will need: 8x Neodymium Magnet 5x3mm Glue - for windows (protection net) and shell holders Glue windows in the place and glue shell holders on stabilizer and upperrear part. Then you can glue…
Filament PETG Original model truggy: https://dukedoks.com/portfolio/guia-cramer/
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 This is central differential housing for metal differential for OpenRC Truggy 1/10 by NiKO. All files has to be printed! You will need: 1x 33154…
Original: https://www.printables.com/de/model/681056-nomad-rc-truggy Attached a GoPro-Mount / Actioncam-Mount to the Rear_Body_V2
Here are some parts which where created or modified. Body mount Holder for wheels or a wing (holes are not perfectly aligned but you can use a drill to get it working) Wing Motor mount (modified to get the right distance between spur and…
Description Ultra-high-performance 1/8 scale RC car, 3D printable, using standard JLB CHEETAH J3 parts. The design is improved, and much more durable than the original. Easy Fix, Strong, Modulable, Big battery place, Speed 100Km/h in 4S.…
Absima ASB1BL Wheel Hub with Pin (4) Buggy/Truggy Radmitnehmer 12mm (4) Buggy/Truggy Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1 Infill: 100% Category: R/C Vehicles
These are the Replacement parts for HobbyKing Berserker 1/8 RC Truggy that I frequently broke. The Fit wasn't perfect but worked.
I had put this together as a small side project and was looking for something to put it on so that I could screw to it easily. This stand is the result. It can be printed in PLA or PETG. I printed the infill with at least 50% The posts…
This is case support for my brushed 540/550 motors to keep it's position and alignment when overheating. Need 2xM3 nut and 2x M3x8 screw to attach it to the frame holes below. I printed it in Nylon, PC
Created this holder for the Bumper/Skidplate from Steamerzone: http://www.thingiverse.com/thing:377994 Just print it and the two washers and you can mount it on your skidplate/bumper. Light bar from hobbyking.com:…
I wanted slimmer tyres for the Cramer Buggy. The tyres are meant for high grass, and can take on sand and such. The slimmer tyre performs more like a real world large diameter tyre than the Store bought or other CRAMER Variants. I've…
ARRMA 6S NOTORIOUS / KRATON / BIGROCK X ZDRACING TRUGGY 1:7 4WS 4WD RC CAR RC CAR PRINTED ARRMA X ZDRACING TRUGGY 1:7 4WS 4WD (4 WHEEL STEERING X CENTRAL DIFF) Ultra-high-performance 1/7 scale RC car, 3D printable, using standard ARRMA…
Ultra-high performance 3D printable RC car, using standard WLTOYS parts. The design is improved, and much more durable than the original. In this kit there are two types of steering, Steering Ackermann system or Direct Drive system. If…
RC CAR PRINTED JLB X HSP TRUGGY 1:8 4WS 4WD (4 WHEEL STEERING X CENTRAL DIFF) Ultra-high-performance 1/8 scale RC car, 3D printable, using standard JLB CHEETAH J3 parts. The design is improved, and much more durable than the original.…
This is case support for my brushed 540/550 motors to keep it's position and alignment when overheating. Need 2xM3 nut and 2x M3x8 screw to attach it to the frame holes below. I printed it in Nylon, PC
Description Ultra-high-performance 1/8 scale RC car, 3D printable, using standard JLB CHEETAH J3 parts. The design is improved, and much more durable than the original. Easy Fix, Strong, Modulable, Big battery place, Speed 100Km/h in 4S.…
Filament PETG Original model truggy: https://dukedoks.com/portfolio/guia-cramer/
[·._.·[ V5 JLB CHEETAH RC CAR TRUGGY 1:8 ]·._.·] Voiture RC ultra performante à l'échelle 1/8, imprimable en 3D, utilisant des pièces standards JLB CHEETAH J3.Le design est amélioré et beaucoup plus durable que l'original. Easy Fix,…
I bought some wheels for the truggy designed by dukedoks and they have no rim. As I have not found any compatible for them, I have designed this one. Dimensions (see the sketch): Width: 50mm Total diameter: 79mm Tyre bead diameter: 73,5mm…
ARRMA 6S NOTORIOUS / KRATON / BIGROCK X ZDRACING TRUGGY 1:7 4WS 4WD RC CAR RC CAR PRINTED ARRMA X ZDRACING TRUGGY 1:7 4WS 4WD (4 WHEEL STEERING X CENTRAL DIFF) Ultra-high-performance 1/7 scale RC car, 3D printable, using standard ARRMA…
Vídeo: Guía de construcción: https://dukedoks.com/portfolio/guia-cramer/ Impreso en PETG (Rojo) y TPU (Gris oscuro) Medidas (Con ruedas y spoiler): 460mm largo 360mm ancho 135mm alto Wheelbase: 300mm ACTUALIZACIONES: 18-01-23 Mejoras en…
Ultra-high performance 3D printable RC car, using standard WLTOYS parts. The design is improved, and much more durable than the original. In this kit there are two types of steering, Steering Ackermann system or Direct Drive system. If…
Ultra-high performance 3D printable RC car, using standard WLTOYS parts. The design is improved, and much more durable than the original. In this kit there are two types of steering, Steering Ackermann system or Direct Drive system. If…
it is a small model print 100 percent infill and high res I made this to print in metal through JLC3d because the original ones broke and were fragile
Shorter steering parts for use with the all metal front differential. I just moved the holes back a few MM and clipped off the front so they wouldn't hit into the differential casing. Rear bumper. Best if printed in softer material like…
RC CAR PRINTED JLB X HSP TRUGGY 1:8 4WS 4WD (4 WHEEL STEERING X CENTRAL DIFF) Ultra-high-performance 1/8 scale RC car, 3D printable, using standard JLB CHEETAH J3 parts. The design is improved, and much more durable than the original.…
Rim (BMW look-a-like) for a Stealth X09 RC truck. My kid hit the curb with his rc truggy so the rim crushed. I couldn't find one with the right dimensions online so i made one in Fusion 360. Dimensions: Hex nut 12 mm With 50mm Hub offset…
You'll need 6 pcs of M3x16 or M3x20 screw to put it together.
Hi guys! This is my new project, a fully 3D printed RC Truggy. To access the video just click on the following link: https://youtu.be/we-pLEeqJOg This is a very versatile car, all terrain and very fun to drive. It has some problems that…
This is a remix of the differential housing for Niko's version of the OpenRC Truggy. Clearance was added to the bearings and the pinion gear was pushed out 1mm. This allows the use of shims to dial it in, though shims are not needed if…
Un jante de Voiture RC TRUGGY 1/10. Un design unique. N'hésiter pas sur les couleurs toutes lui vont bien !! Un petit partage de vos impressions fait toujours plaisir..
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 Update - 15.05.2020 Added smaller version of front and rear shock towers for 100mm oil shocks. The original Shock Towers are for 110mm oil shocks.…
22/06/2025 : add some other wheels size for buggy/crawler tip : print with the face downside and touching bed support for the center hub. Rc 1/10 standard buggy / truggy wheel. width : 50mm inner tyre diameter : 58mm 2 holes for air…
Model scale 1:10 Four-wheel drive Length: 43 cm Wheelbase: 27,5 cm Width: 30 cm Track: 24 cm Height: 15 cm Weight: 2,7 Kg (With 2s 5200mah battery) Dimensions of the battery tray: L 140mm*W 48mm*H 26mm 🚙 RC Truggy – NOMAD: Built for…
This is a replacement part for the broken metal part holding arms - XINLEHONG RC Truggy X9115 X9116
This doesn't work properly and won't be worked on by me! This was my first time using a proper CAD-Software. All I wanted to do was put the motor in the front and and arms to the rear, but I ended up redesigning most of the car. I…
CRAMER TRUGGY原车为打印齿轮及传动轴，改1/10车的差速器后金属狗骨不够长（最长的是100mm），打印延长器（一组两个）安装上就可以使用金属狗骨。
打印的差速器很容易被打碎。改用HSP 02024 1/10 金属差速器，修改了前后差速器外壳。两个文件，其中一个是SolidWorks的文件，方便个人进行修改。
Remix of gear for OpenRC Truggy central diff to use with M0.8 metal gear i bought on aliexpress. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Infill:** 100 Notes: 0.12 layer hight, 0.4 nozzle…
