Sugoi Body for Dukedoks Cramer RC Truggy car
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just another option for a body for your amazing Cramer RC Truggy.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 31
- Makes
- 0
- Views
- 257
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Introduce your model, create build instructions and add print tips... OK!
Introduction
This another option for body of cramer RC truggy:
https://www.printables.com/model/1274256-cramer-truggy-rc-4x4-full-3d-printed
Also, I created a small project for the lights using some WS2812 LEDs and a ESP32-S2 mini to control them.
Build Instructions
Hardware used:
Front lights: 2x M3x20 screws / 2x M3 nuts
Front bumper: 2x M3x25 screws / 2x M3 nuts
Rear lights: 2x M3x16 screws / 2x M3 nuts
Rear bumper: 2x M3x20 screws / 2x M3 nuts
Locker button: 5.6 x 11 spring / M3x16 screw
Spoiler: 4x M3x6 screws
The body was design to use the same screws from chassis, so perhaps you need some of them longer
You can find the project to flash in a ESP32 MCU in this repository: https://github.com/JulioSugaya/sugoi-rc-lights-v1
The LEDs used in this projects are WS2812 8 channels which I put 2 for each light, you can solder 2 in sequence and use them as 16 channels.
Btw, there is a little case to fix this ESP32 in the chassis among the model files.
Print Tips
Here below there some advice which worked for me.
Model | Filament | Support? | Raft? |
cramer_sugoi_body-botton | PLA | Yes | Yes |
cramer_sugoi_body-top | PLA | Yes | Yes |
cramer_sugoi_body-front | PLA | Yes | No |
cramer_sugoi_body-rear | PLA | Yes | No |
cramer_sugoi_body-spoiler | PLA | No | Yes |
cramer_sugoi_front_bumper | TPU | No | No |
cramer_sugoi_rear_bumper | TPU | No | No |
cramer_sugoi_front_lights | PETG | Yes | No |
cramer_sugoi_front_lights_glass | TransparentPETG | Yes | No |
cramer_sugoi_rear_light | PETG | Yes | No |
cramer_sugoi_rear_light_glass | TransparentPETG | Yes | No |
cramer_sugoi_body-esp32-box | PLA | No | No |