1 / 10
540/550/3650 motor metal bracket mount and tensioner for belt mod Dukedoks cramer truggy 4x4 — image 1
1 / 10

540/550/3650 motor metal bracket mount and tensioner for belt mod Dukedoks cramer truggy 4x4

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This mod to attach metal bracket to prevent motor mount plastic from melting. Can adjust belt tension using M3 washers.

Rating
0 / 5
Likes
7
Downloads
31
Makes
0
Views
252
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I make this motor mount bracket for belt mod to run with 540/550 brushed motor. It helps plastic withstand high heat longer.

Enable muanual support under L shape

Print with PC or Nylon

You'll need 40x40mm metal bracket

Specifications:
Material:Aluminium Alloy
Bottom-surface: 40x43mm
Height: 47mm
Thickness: 3mm thick aluminum alloy
Central aperture: about 12.8mm.
Distance between side fixing holes: 25mm
Bottom fixed hole spacing: 25mm, 30mm (transverses)
Side fixed aperture: M3-hole
Bottom fixed aperture: M3-hole

2x flathead M3 screws for the motor and 4xM3 screws for the mount base


Note: You can add 1 or 2 M3 washer to mount base screws to make it as a belt tensioner.

It'll shift the motor 1mm toward the chassis that work great for me no more belt slip with my brushed 550 21T and 540 35T at full throttle ^^.

If your 80XL belt isn't loosen, just skip this. I also make another version with thicker mount base so you don't have to add washers.

Tags