540/550/3650 motor metal bracket mount and tensioner for belt mod Dukedoks cramer truggy 4x4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod to attach metal bracket to prevent motor mount plastic from melting. Can adjust belt tension using M3 washers.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I make this motor mount bracket for belt mod to run with 540/550 brushed motor. It helps plastic withstand high heat longer.
Enable muanual support under L shape
Print with PC or Nylon
You'll need 40x40mm metal bracket
Specifications:
Material:Aluminium Alloy
Bottom-surface: 40x43mm
Height: 47mm
Thickness: 3mm thick aluminum alloy
Central aperture: about 12.8mm.
Distance between side fixing holes: 25mm
Bottom fixed hole spacing: 25mm, 30mm (transverses)
Side fixed aperture: M3-hole
Bottom fixed aperture: M3-hole
2x flathead M3 screws for the motor and 4xM3 screws for the mount base
Note: You can add 1 or 2 M3 washer to mount base screws to make it as a belt tensioner.
It'll shift the motor 1mm toward the chassis that work great for me no more belt slip with my brushed 550 21T and 540 35T at full throttle ^^.
If your 80XL belt isn't loosen, just skip this. I also make another version with thicker mount base so you don't have to add washers.

