Rebuild RC's DIY Budget Droop Gauge for 1/8 Scale Buggy/Truggy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic droop gauge for RC Racing
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 76
- Makes
- 0
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Hi Buddy
It’s no shame to race on a budget! If we help each other, we keep the racing community alive.
Because i want to start with rc racing and can't effort all of this tools that you need or may want. So i designed my own Droop gauge. And yes it is inspired of the tekno droop gauge. You can use a M3 threaded insert or screw it direkt in the foot. What you prefer or have on your hand. Use also a little bit threadlock so your screw sits on its place
I designed it to:
measure the distance from the bottom of your chassi plate to the center of your wheel hub.
what you need:
1x M3 thread insert (if you have one)
1x M3x14 or M3x16 with washer (use a M3x16 if you have no insert the hole is deep enough)
theadlock
You only need support for the Droop gauge stand part 1. all of the other parts are optimized.
Check the images for the print orientation.
have fun!
share your thoughts!
follow me on instagram! (if you want)