1 / 4
Dukedoks Cramer Truggy RC 4x4 horizontal stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Horizontal stand for Cramer Truggy, ideal for servicing.
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 154
- Makes
- 4
- Views
- 2,976
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Horizontal stand for the Dukedoks Cramer Truggy, ideal for servicing such as differential repair or for display/storage. The car is held in place by holes for the chassis screws and by cut-outs for bumpers.
You will need some M3x16 (anything between 12 and 18 will do) and M3x10 screws.
Variants
There are three possible variants:
- Lite – support for body only
- 8 pcs of M3x16
- Display – support for body and both axles
- 12 pcs of M3x16
- Full – support for body and both axles, strengthened (recommended)
- 16 pcs of M3x16
- 4 pcs of M3x10 (these are highlighted in a third picture)
Pro tip
Put rubber feet on the bottom for better grip.
