1 / 19
Truggy Shell (for Truggy by Niko)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This shell fits on Truggy created by Niko. You will need: 8x Neodymium Magnet 5x3mm Glue - for windows (protection…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This shell fits on Truggy created by Niko.
You will need:
- 8x Neodymium Magnet 5x3mm
- Glue - for windows (protection net) and shell holders
Glue windows in the place and glue shell holders on stabilizer and upperrear part. Then you can glue or just place magnets in holes.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20
Notes:
Print it as it is. You can use supports if you have problem to print it without them (use Support Overhang Angle = 60°).
Category: R/C Vehicles